All genres charts

Notes: Cara (uMarbles)

This is a new build of a micro version of Mutable Instruments Marbles. It retains all the functionality of the original full-sized module but takes up less space. It comes with jack lights that can be disabled via a jumper on the back.

These modules use tall bushing potentiometers to offer a more stable feel. You can see the difference in the last picture. You will feel much less wiggle with the tall bushing (left) than with traditional trimmer style (right).

The module is fully assembled, tested, and calibrated. The calibration is done with a 6.5 digit multimeter, itself recently calibrated, to ensure you get the highest accuracy from your module. Eurorack power cable included.

Width: 10HP
Depth: 34mm
Height: 3U
Power Consumption: +12V: 80mA -12V: 20mA

Notes: This is a new build of a micro sized Mutable Instruments Plaits called Knit.

These modules use tall bushing potentiometers to offer a more stable feel.

The module is fully assembled, tested, and calibrated. Eurorack power cable is included.

Width: 6HP
Depth: 25mm
Height: 3U
Power Consumption: 12V: 50mA -12V: 5mA

Notes: This is a new build of a Monsoon, which is a variation of Mutable Instruments Clouds with separate CV and controls for the 4 "blend" functions. The 4 LEDs on the sliders indicate incoming control voltage for the 4 main parameters. The button which was used to select blend parameters now simply switches what the 4 LEDs display (audio input monitoring or monitoring the 4 blend amounts.) Parasites 2.01 firmware is loaded by default. Alternative firmware can be loaded by request.

The module is fully assembled, tested, and calibrated. Eurorack power cable is included.

Width: 12HP
Depth: 22mm
Height: 3U
Power Consumption: +12V:120mA -12V:10mA

Notes: Erica Synths Black Quad VCA2 is a versatile four channel voltage controlled amplifier and mixer module for use in complex modular systems. Each channel has linear/logarithmic response selector and signal level indicator LED. All outputs are sequentially mixed and CV inputs are normalled to each other, so you can use the module in various configurations. If no CV is applied, the Black Quad VCA2 performs as a signal mixer, and the 4th channel is DC coupled for controlling CV sources, as well.

Notes: Little box, big reverb. Specially designed for huge, cavernous echo effects and ideal for infinite tails and frozen sounds, the Blackhole is an exceptionally high quality pedal at a very reasonable price.

Supplier's Notes:
Create haunting echoes, ethereal landscapes and otherworldly ambience with Blackhole, a reverb pedal as big and as mysterious as the cosmos. Blackhole takes you there - beyond the ambience of mere earthly Halls, Rooms, Plates or Springs. Blackhole will take you on a journey from cathedral-type spaces to a universe of out-of-this-world soundscapes.

It includes onboard tone controls, modulation, and infinite reverb settings with mono or stereo operation, MIDI control, preset storing, and most importantly a new compact, easy-to-use interface.

Blackhole features two types of infinite reverb. Infinity mode continuously layers new sound on top of a suspended reverb. Freeze mode holds the effect allowing you to play over the reverb tail. The Freeze Footswitch allows instant access to this feature.

Unlike other reverbs which may offer pre or post modulation, Blackhole features modulation built into the reverb structure itself. It's essentially a big multi-voice chorus, with unique tone-shaping ability. You can utilize extreme settings to smooth out the edges.

Like all Eventide pedals, Blackhole allows you to fine tune every aspect of the effect. With a new, user-friendly, intuitive interface, just about anyone can shoot for the moon and land beyond the stars.

Input: 1/4" TRS / Mono = Tip, Stereo = Tip & Ring
Out 1: 1/4" TS Mono / Mono Output
Out 2: 1/4" TS Mono / Stereo Output
EXP: 1/4" TRS / Expression pedal, Aux Switch or MIDI I/O
Mono/Stereo Switch: Sets Input to Mono (Tip) or Stereo (Tip + Ring)
Guitar/Line Level Switch: Optimizes internal gain structure
Mini USB Software updates, MIDI I/O
DC Input Jack: 5.5mm / 2.1mm plug / Center Negative (-)

Input Impedance: 700k ohms Mono, 990k ohms Stereo
Max Input, Guitar: +8dBu
Max Input, Line: +14dBu
Output Impedance: 220 ohms
Recommended Load Impedance: 10k ohms

Power: 9V DC @ 200mA / Center Negative (-)
Dimensions (product): 4" W x 4.25" D x 1.68" H / 102 mm x 108 mm x 43 mm
Weight (product): 1.06 lb / 0.48 kg
Dimensions (package): 7.7" W x 4.75" D x 2.8" H / 178 mm x 121 mm x 71 mm
Weight (package): 1.68 lb / .77 kg

Notes: Moog SR Series Cases are here to safeguard your Moog Grandmother synthesizer where you need it most and ensure your sound travels far and wide.

Developed with artists for artists

Musicians report the most important performance a case can offer are protection from impact and protection from wateriin that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Complete protection, comfort, and convenience

Moog SR Series Cases feature generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Moog SR Series Cases are a perfect fit for your Moog Grandmother synthesizer.

Specs

Internal material: Padded plush liner
External materials: Durable abrasion resistant 1680D Cordura, water-resistant. Laminated zippers, reinforced stitching and metal rivets
Handles/straps: (2) Smooth and durable webbed handles (top and side) with reinforced stitching - Removable anti-slip shoulder strap, - Removable air-mesh padded backpack straps

*** Please note: the synthesisers in the pictures are not included, they are shown for demonstration purposes only. ***

Notes: Moog SR Series Cases are here to safeguard your Moog Matriarch synthesizer where you need it most and ensure your sound travels far and wide.

Developed with artists for artists

Musicians report the most important performance a case can offer are protection from impact and protection from wateriin that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Complete protection, comfort, and convenience

Moog SR Series Cases feature generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Moog SR Series Cases are a perfect fit for your Moog Matriarch synthesizer.

Specifications

Internal material: Padded plush liner
External materials: Durable abrasion resistant 1680D Cordura, water-resistant. Laminated zippers, reinforced stitching and metal rivets
Padding: Semi-rigid ABS, generous foam padding
Handles/straps: (2) Smooth and durable webbed handles (top and side) with reinforced stitching - Removable anti-slip shoulder strap, - Removable air-mesh padded backpack straps

*** Please note: the synthesisers in the pictures are not included, they are shown for demonstration purposes only. ***

Notes: The usual solid MIDI Fighter build quality and LED feedback combine with rotary encoders and push-button options in the Twister. Configure it for your chosen software and get creative.

Supplier's Notes:
The most playable knob controller around.

Each knob doubles as a super powerful button. Turn the encoders to control a parameter in any software and twist their built in buttons to quickly reset the knobs or turn effects on and off. This means each knob is like 3 knobs.

The heart of the Twister are the 16 "Endless Encoders". These are very powerful knobs that don't have a start or ending point. Instead the LED rings show you the position of the knob. This means that the controller and the software are always in sync, even when changing banks, racks or songs on the fly.

The Twister allows for deep customization of every knob across all 4 banks with 5 killer features not found on any other controller. Change LED color, transform an encoder into a DJ filter, enable fine midi control, toggle a parameter on/off, or setup a "shift" knob so pressing a push-encoder activates control of a secondary function

The Midi Fighter twister was designed with producers in mind. We need compact, reliable controllers that are easy to map to our DAW's. The endless encoders respond to the software so everything is always in sync, even when playing back recorded automation.

Combine The Twisters powerful knobs with a DAW template so that every time inspiration strikes, a powerful studio environment is there to support you. This is how the pro's do it - why wouldn't you?

The knobs not only control your typical volume, pan and FX send controls but they also enable a host of quick access to deeper control - only available on the twister. For example, push the encoder to send out a fine resolution range and dial in the exact EQ setting you want. Release and return to normal range control.

You need to be able to react to the dancefloor. Having a dedicated controller is just like being a practiced instrumentalist. Once you have a idea, you can just make it happen as soon the inspiration hits.

*** Firmware update June 2023 ***

If you just bought your Midi Fighter Twister or haven't used the utility in a while chances are you might need to update it's firmware with the latest and greatest. This is a fairly straightforward process as long as you take some extra precautions.

1. Download and install the MF Utility if you don't have it already on your computer (PC/Mac).

2. After you check that any other MIDI related applications (Ableton, Traktor, etc) are closed connect your Twister directly to your computer and open the MF Utility. DO NOT USE A USB HUB

3. Click on "File>Export Settings" and select a destination, this will back up your Twister's settings if you have customized your Twister beforehand and make sure you export it outside of the "Midi Fighter Utility" folder since your OS might lock this location and prevent the MFS file from being generated successfully. If you just got your Twister you can skip this step.

4. If a new firmware is available for your device you should see a message in the utility as soon as your device is detected.

5. Click on the orange UPDATE FIRMWARE button and accept the pop up message warning you not to use a USB hub.

6. Once this process finishes your device will reboot and the MF Utility will now show it has successfully updated the firmware!

Notes: Complex gate and CV generator designed as a trigger source and modulation tool. Based around four sine wave LFOs that mix together and interact to create ever-changing patterns.

Supplier's Notes:
In 2009 John Berndt coined and defined the term Relabi in his essay "Relabi": Patterns of Self-Erasing Pulse, these are his own words: "Relabi, Def.: The experience of a palpably coordinated plurality of events that appears to be cyclical but simultaneously suspends identification of a uniform pattern, preventing a resolved sense of pulse. Relabi therefore seems equally pulsed and unpulsed at the same time. It is an experiential gestalt, a quality of experience, greater than the sum of its parts (it forms a sustained unity in experience, albeit of a new kind)."

He also makes the question: "Why would anyone want this Relabi experience? I maintain that much of what is exciting in musical forms involves an interplay between the setting up and denying of pulse expectations."

Inspired by this idea, ADDAC System developed this module that is both a gate/trigger and cv generator that can be freely used to trigger events or act as a complex modulation source. Four Sine LFOs are internally generated, each has controls for gain, frequency and mute(off). These 4 LFOs are then mixed together to generate what Berndt named the "Relabi Wave" this "wave" becomes a complex bipolar CV source. This i5v bipolar "wave" can be monitored on the 2 dedicated leds and is also available at its own Output.

Make sure to check the User's Guide for indepth description, working behaviour and diagrams.

Tech Specs:
10HP
4cm deep
100mA +12V
40mA -12V

Notes: Eurorack version of the 16n Faderbank, offering 16 CV inputs and 16 outputs, each corresponding to a fader. MIDI in and out allows you to configure the module in myriad ways.

Supplier's Notes:
This module is a eurorack version of the 16n Faderbank, implemented with 16 CV inputs and some other smart add ons. Almost everything is in the front panel.

This new version is oriented for firmware tweaks and future expansions, still being fully compatible with the 16n and the previous Sweet Sixteen.

Changes from previous versions:

Function push button
Function led
Expansion header in the back
i2C pull-up switchable with jumpers (aux pcb not required)
Mate black & gold panel with brass nuts

There are 16 channels, which can be used as:
Midi controller
Manual CV generator (0 to 8v range)
Attenuator
CV to Midi CC
i2C controller
CV to i2C data

The Midi CC number and channels can be different for the TRS jack and the USB port. The firmware has been tweaked to allow also Pitch Bend, which is pretty handy because you can get much better resolution through Midi (from min to max values Midi CCs have 128 steps and Pitch Bend has a resolution of 16.384 steps).

The voltage generated by every fader is up to 8v, which is good enough to control eurorack modules (like wide open/close the cutoff frequency of a filter etc).

In the midi CC messages, 0 volts will correspond to a value of 0, and 8 volts to a value of 127. But the CV to Midi can handle also negative voltages, for such task there are 4 slide switches (1 for every 4 faders) that swaps the internal voltage reference in a way that, when activated, 0 volts will be the middle position of the midi controller, -4 volts the minimum value and +4 volts the maximum. Those switches only affect the Midi/i2C outs, CV outs won't be affected by them in any way.

If you plug in a bigger voltage source (like a -5v+5v LFO or a 10v envelope) the fader will work as attenuator, so you'll be able to adapt how that signal affects the Midi CC out, covering the whole Midi CC range, saturating the waveform or just affecting it briefly.

Panel USB port is type B, which seems to be stronger than mini or micro ones.

i2C could connect directly to an ER-301, monome Ansible or a monome Teletype.

The Teensy can be powered via the internal regulator or the +5v eurorack rail (selectable via a switch on the back).

The partial kit comes with all SMD populated, so only through hole components requires soldering work.

size: 24 HP

92 mA +12V

86 mA -12V

Notes: This module is a 12 ins and 12 outs precision buffered matrix.

It is conceived to be a semi-permanent matrix for medium to big systems, with white silkscreen labels to customize ins and outs names.

Every output has a rotary switch to select an input. This is not a mixer, you can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every output for visual info of the signal that is going through it.

This module allows fast patch changes and easy rerouting signals, both audio and cv.

The last version has matte black & gold panel, and it's equipped with OPA4171 precision op-amps for the buffers.

26 HP
45 mA +12V
45 mA -12V

Notes: Dual tidal modulator with max, min & mix outs

FranKinksTides is a 18hp dual Tides (based on the Swirls pcb layout) with the max/min circuit from Kinks and some switches for sync, quadrature, pll and fm operation . It can be a double/complex oscillator, a dual function generator or any combination of oscillator, Lfo and Envelope generator with lots of cv control plus some interesting cross-modulation and sync features.

Some improvements in version 1.2:

-Mix output is now buffered, no signal bleeding on single outs.
-Mix pot controls also the balance of the signals sent to the max/min circuit.
-Uni/bi switch now also determines the signal sent to FM1.
-Clock/sync switch has now a center OFF position, no need of plugging a dummy cable in the Clock1 when using Sheeps firmware to avoid ultra fast sound bank changes.
small improvements for DIY:
-Bigger font size on the pcb.
-Parts renumbered for easy DIY.

Original design by Emilie Gillet
Available assembled and DIY (pcb+panel)
+12v
-12v

Notes: 16 trigger ins to play up to 4096 wav files from a micoSD card

Nutella is a eurorack conversion module for the Sparkfun Tsunami Super Wav Trigger.
Features:
-16 trigger in & buttons to play audio files.
-MicroSD card to store up to 4096 wav files in 44.1kHz 16bit.
-32 voices polyphony in mono and 18 in stereo.
-Low latency (8ms typically)
-8 audio outs (modular level)
-Midi in (velocity sensitive, supports MIDI Note-On, Note-Of, Pitch Bend and Program Changes messages, as well as Controller messages for real-time control of sustain, attack and release times and volume.
-Ability to play multiple audio stems in sample-locked sync.
-Can be used as a Wav player and Midi-to-Trigger converter at the same time.
-Trigger ins (and so buttons) can be assigned to various functions (normal, next, previous, random, pause, resume, stop, volume up, volume down, trigger bank up, trigger bank down, synced set, midi bank up, midi bank down)
-Easy configurable by an optional ".ini" file stored in the microSD card, a Tsunami Configurator utility (Windows, Mac and Linux versions available), makes it easy to set options and generate this file.
-Super easy firmware update system via microSD card, no external programmer needed.

30 mA +12V
15 mA -12V
200 mA 5V

Notes: Voltage-controlled Dual VCO/LFO - two oscillators independently set as VCO or LFO.

Features in VCO mode:
V/Oct tracking over 10 octaves
Through zero and linear FM
Sub-octave output
Hard & soft synchronization
VCA control and CV algorithms selection
Quantizer with various scales
20 algorithm-based synthesis types among:
Wave shaping
Phase modulation
Phase positioning of multiple waves
Up to 5 stacked oscillators in tunable unison
Self-sync with phantom oscillator
Additive synthesis (7 waves)
Variable bit reduction (bit-crushing)
Ring modulator with its own 2nd oscillator
Noise with LPF, BPF, or resonant filter
Features in LFO mode:
Simultaneous signal and trigger outputs
External wave synchronization
Clock controlled rate with voltage controlled multiplier and divider
CV and knob control of output level
Algorithm based wave engine with a selection of:
Wave shaping
Phase modulation
Random levels and vectors (also Brownian)
Randomly spaced triggers and waves
Display with contextual icons and instant reminder help text
LEDs indicating potentiometer vs. value matching, switch settings and output levels
Automatically saved settings for instant recall at power on
Firmware update by playing an audio file via the front panel
Compact and skiff-friendly module

The driving idea behind the Twin waves voltage-controlled dual oscillator/LFO is to offer two interesting oscillators in a skiff-friendly and compact size. To achieve that challenge, Klavis built the product's architecture on the concept of pre-defined algorithms, where the most useful configurations and their matching parameter are ready to use.

This MKII evolution brings a redesigned layout, additional knobs for more hands-on fun and semi-modular cross-patching between sections.

All of the original features are present: a top selection of synthesis techniques, each with their key parameter directly at hand, enriched by a full set of complementary features.

More than ever, the Twin Waves is versatility at its best.

Dimensions:

(mm) Height: 128.40, Width: 40.40, Depth: 21.00
(Inches): Height: 5.06, Width: 1.59, Depth: 0.83
Eurorack: Height: 3HE, Width: 8HP
Depth behind panel (no supply cable inserted)- 21.00mm, 0.83 inches

Current draw
+12V: 46mA
-12V: 18mA
+5V: 0mA

Notes: Entry-level controller for NI's Traktor DJ software. Surprisingly feature-packed for such an affordable price. Two channels with integrated mixer and effects, plus RGB pads for hot cues and loops.

Supplier notes:
Whether it's bass-heavy breakdowns, steppy synths, or peak-time rewinds that define your style, the TRAKTOR KONTROL S2 has everything you need to make your mix happen. Craft sets on two decks and get creative with easy-to-use tools like looping, beat syncing, and club-grade effects.

Turn the music you listen to into the sets you play, with a streamlined interface that makes blending tracks a breeze. Plug in, line up a few of your favourite tracks, and get mixing wherever you are. You can leave the beatmatching to TRAKTOR, so you have more time to pick tunes that fit the vibe, experiment with FX, use looping and remix decks, and to define your own sound. Whether you're at a house party, a bar, or the club, you can create mixes made to make you move.

WHAT'S NEW?

The perfect way to really ramp up your mixing, with eight RGB pads on each deck. Cut straight to a hook everybody knows by setting and triggering cue points, or punch in your own edits with samples on a Remix deck.

Upsized, touch-sensitive jog wheels let you cue, scratch, and nudge tracks much more accurately - not to mention perform bigger backspins. They also mean more fun getting hands-on with your music.

A familiar club-standard layout, wherever you go. Browse tracks, adjust beatgrids, use effects and features like Flux Mode, directly on the TRAKTOR KONTROL S2. Everything you need for creative mixes at your fingertips.

Turn up your track transitions with new Mixer FX: Cut bass with a filter instead of EQ for resonant kicks, or get hi-hats galloping with delay. A choice of eight effects and three filters ensures you always have the right tools to hand.

Scale up your set with Steams and loops. Trigger one-shot sounds and samples to inject new energy into your mix.

Notes: The MOD REX is a kinetic tour-de-force that lets you weave compelling, shifting, musical tapestries. Whether you are a guitarist, synthesist or electronic musician you will find it inspires your creativity and stretches your musical boundaries.

Four independent modulation sections:

The heart of the pedal is its four, independent modulation sections synced in time, they are:

MOD features great sounding EHX Vibrato, Flanger, Chorus or Phaser. The Depth knob lets you set the amount of the effect while Feedback controls the resonance of the Flanger and Phaser.

TREM delivers tremolo, an effect that modulates the volume of your signal. The Depth control sets tremolo intensity.

PAN modulates between left and right in stereo operation. In mono operation the PAN section acts as another tremolo section, but with the wave shapes all inverted!

FILTER offers a choice of a modulated LPF, HPF or BPF. In LPF (low pass filter) frequencies above a modulated cut-off point are cut. In HPF (high pass filter) frequencies below a modulated cut-off point are cut, and in BPF (band pass filter) frequencies above and below a modulated centre point are cut.

Each section also features a choice of four LFO shape options: rising sawtooth, triangle, falling sawtooth or square wave. They affect the way the modulation transitions and provide advanced creative control over the specific section as well as the way they interact with each other.

Tempo control that's flexible and powerful:

The MOD REX delivers virtually limitless polyrhythmic possibilities.

Its TEMPO component gives you nine note-length choices for each of the four modulation sections. They are independently selectable in increments starting at a whole note and ranging thru subdivisions that go up to a 16th note. In addition, any of the sections can be bypassed.

The MOD REX's tempo (displayed as beats per minute or BPM) is adjustable with the Tempo knob, Tap Tempo footswitch or by using an expression pedal into its EXP input. It can also be synced to an external device with MIDI Clock or an external pulse clock.

MIDI and the MOD REX:

The pedal's robust MIDI implementation enables you to sync devices quickly and easily as well as automate functions and changes so they occur precisely when and where you want them whether you are working at home, in a studio or live.

The MOD REX accepts MIDI to enable it to tempo sync the modulation rate with an external device, to recall presets via MIDI Program Change messages and to control any parameter on the MOD REX via Control Change messages.

Extras:

The MOD REX lets you save and recall up to 100 presets. It comes from the factory with 20 great programs.

The pedal features full stereo input and output.

An external foot controller input makes banking up and down thru presets quick and easy.

Notes: Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.

Features
Two independent modulation/pitched noise sources
7morphing waveshape + noise
LFO Sync, frequency divisions and multiplications
Integrated VCA for first modulation source
Two main outputs
Two outputs with an adjustable phase shift
LP and HP filter on outputs in pitched noise mode
CV control over LF rate/noise pitch

Output level: -5...+5V
CV level (full span): -5V - +5V
Power consumption: 86mA@ + 12V, 7mA@ - 12V
Module width: 10HP
Module depth: 45mm

Notes: Cerberus is a multi-function effect pedal which can be used stand-alone or with the 4 cable method and comes packed with extraordinary features including inside routing, IR loader, analogue overdrive & distortion and digital effects. You can use Cerberus as a stand-alone device to prepare your setup and control as a stomp-box chain and/or save any combinations including routing as a preset and recall by a single click. You can add your essential gears into the chain with using 4 cable method no matter which equipment you use. Cerberus also offers MIDI control to organize your own effect pedals and improve your effects control at the same time. We've put together 2 selected analogue Drive/Distortion pedals, modulation effects and delay & reverb effects.

Notes: CV Thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. CCs, Program change ,V/Oct to Note or Clock are some of the messages that can be configured to easily control MIDI gear from your modular rig.

Features:

Class-compliant USB MIDI and TRS connectors.
TRS to DIN5 Type A adaptor included.
8 CV inputs.
Controls fully mappable to any MIDI message (CC, Notes, Program change, Clock, ST/SP, NRPN...)
Configurations are saved both in internal memory and via Sysex.

Specifications:

Current needs: +12V: 50mA, -12V: 4mA
Width: 6 HP
Depth: 25mm, (32mm DIY) including power connector
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: Genuine EMS synthi filter, with redesigned faceplate!

This legendary filter can be switched between pre1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the matrix. This module is made under license from EMS. The only officially licensed remake of the EMS diode lowpass filter used in the VCS3 and AKS synths. It´s a faithful recreation of the original circuit, featuring some modifications that are also done on vintage EMS equipment, like a switchable faster CV response option for very quick modulations. Another switch determines if the filter has 18dB/oct slope as used by EMS pre-1974 or 24dB. The cutoff frequency and also the resonance are voltage controllable. Signal inputs and outputs have level controls.

Notes: Motomouth is an analogue 3-Band, Sedra + Espinoza Bandpass Filter (DABP) with resonant frequencies that are tuned to the same resonant frequencies found in the human mouth and nose cavities, and these can be varied, independently, to form different 'mouth shapes,' to emulate vowels such as A, E, I, O and U. Motomouth can emulate 16 vowels and 'morph' or 'glide' between each vowel using a single Control Voltage input (1V/Oct), and a Gate to 'snap' to each vowel when required.

Two of the bands (F1 and F2) are used to form the mouth cavity, and the third band (F3) is used to form the nasal cavity, which is reasonably static. Varying F3 makes little significant difference 'in the mix,' but having it is important.

The single Control Voltage is decoded to control F1 and F2 independently, because the frequency bands for each vowel are not proportional to each other over the vowel range. So Motomouth has learned how to 'speak,' so to speak, but it still needs to learn more, and that's where you come in.

Specifications:
Module width: 12HP
Module depth: 42mm
Power draw:
+12V: 80mA
-12V: 4mA

Notes: Stylish, good-quality powered speakers suitable for home listening or DJ practice. Built-in Bluetooth for streaming, auto standby and remote control for convenience.

Supplier's Notes:
Keep things simple without forfeiting performance. Housed within YU's compact MDF cabinets is everything you need to get the most out of your favorite tunes. Bluetooth 4.2 with aptX provides high-quality streaming, a single RCA input covers all your analog needs, and a SUB OUT port gives you the option to really crank up the bass. Equipped with 4-inch Kevlarr drivers and 1-inch silk dome tweeters, this high-performance powered speaker system delivers smooth, natural sound while ensuring you experience the full impact of lower frequencies. For laid-back listening, use the provided remote to make quick volume, tone and balance adjustments, as well as control playback while streaming via Bluetooth.

High-performance materials. Exceptional sound.

Silk Dome Tweeters
YU's 1-inch tweeters are made from silk to deliver a high-frequency range that is bright and refined. Their dome shape improves sound dispersion to ensure your ears capture every sound, regardless of where you are in the room.

Never miss a beat.

Signal Detection
Automatic standby and power-up mode conserves power when you're away and continues playback when your music starts playing.

Streaming
Play tunes from the palm of your hand.
Featuring integrated Bluetooth 4.2 with Qualcommr aptX technology, YU lets you stream high-quality audio directly from any Bluetooth-enabled device. Sit back and enjoy your carefully curated playlist from anywhere in the room.

Nearfield
Upgrade your desktop setup.
Take your desktop setup to the next level by connecting YU to your computer via its RCA input.

To reduce vibration and improve soundstaging, use YU with SP9 desktop speaker stands.

Take control of your sound.

Packed with functionality, the YU series remote makes listening to audio more convenient. Quickly switch between sources, tune your sound to fit your space, and control playback while streaming via Bluetooth.

Notes: Part of Erica's brilliant valve-based Fusion range, this is not your typical VCA. Waveshaping and ring modulation are the key features here, twisting and warping signals to great effect.

Supplier's Notes:

The Fusion VCA/Waveshaper/Ringmodulator is a complex sound processor that combines VCA, waveshaper and ringmodulator. It's not a regular VCA; it can operate as one, but most of the power of the module is in advanced modulations - with two CVs applied simultaneously to different stages of the VCA, audio rate modulations, using ringmodulator as a waveshaper - your imagination is the limit!

Low power consumption due to miniature vacuum tubes.

Technical specifications:

Audio Input level: 10Vptp
CV input level (full swing): -10V - +10V
Panel width: 14HP
Module depth: 36mm
Power consumption: 48mA@+12V, 69mA@-12V

Notes: LYRA8-FX is a processor that can give you a significant part of the mysterious LYRA-8 sound thanks to the FX section from the LYRA-8, expanded with CV controls and packed into a Eurorack module.

It contains a double modulated lo-fi delay with cross-feedback and the unique possibility of self-modulation, where the delay output signal modulates its own sample rate. Also, it packs a parallel distortion with CV control of the drive. The distortion is after the delay. It's much more than a delay - you can get a simple reverb, comb filter, chorus and much more cool FXs which are hard to describe.

It has a famous LYRA-8 build quality - no SMD, no twisted plastic shafts.

Pots:
IN volume
Stage 1 delay time
Stage 2 delay time
Stage 1 delay time modulation depth
Stage 2 delay time modulation depth
Delay feedback
Delay feedback CV amount
Delay mix
Distortion drive
Distortion mix
Distortion drive CV amount

Switches:
- Stage 1 delay time modulation source
Stage 2 delay time modulation source

Ins:
Audio in
Delay time CV
Delay feedback CV
Distortion drive CV

Outs:
Main audio out
Delay only out

Dimensions:
Width: 20HP
Depth:40mm

Power consumption:
+12V - 90ma
-12V - 20ma

Notes: You hear that EVP? It's the all new, extra spook-tacular, Ghost Echo calling out from beyond the void! The Ghost Echo is Earth Quaker's spooky take on the haunted amp-top spring reverberation units of yesteryear. This creepy analog/digital spring reverb emulation machine boasts a terrifying 30ms - 150ms of pre-delay, controllable via the Attack knob, for everything from a quick rockabilly slapback to viscous pools of ectoplasmic reverberations. When playing staccato, you'll hear the tortured trails of the reverb, resulting in more of a slapback or echo sound. Legato playing will reveal a massive ambient "depth" that fattens up the sound - and look out, it's right behind you!

Phew, that was close. The Dwell control sets the length and thickness of the decay, which is to say that it controls how long the disembodied spirits of notes no longer with us float through the ether. At the maximum setting it will descend into an infinite loop of self-oscillation. The Depth sets the intensity of the reverb, which you probably know as the wet/dry mix.

Controls:
1. Attack: Adjusts the length of the pre-delay, from 30ms at minimum to about 150ms at maximum. When the Dwell is set to self-oscillate, this will change the pitch of the oscillations.

2. Dwell: Adjusts the length of the decay. This will start to self oscillate around 3 O'clock, the pitch of the oscillations can be changed by turning the Attack control.

3. Depth: Mixes in the wet signal with the dry, unity is around noon and everything after is boosted.

Tech Specs:
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 86 mA
Input Impedance: 10 MO
Output Impedance: 1 kO

Notes: Tweaking the platform of their Fault overdrive/distortion, Old Blood Noise have carved out room for greater gain range, voice control, and clipping options in the Fault Version 2. The Fault remains a great overdrive with footswitchable second gain stage and three band EQ, and now excels as a clean boost and tweakable high gain distortion as well.

Notes: The Archer Ikon is sort of a 2 in one guitar pedal. It can be used as just a clean boost by turning the gain all the way down. As you introduce gain it will attenuate the clean signal but there is a magical blend in between that you will find. Please experiment!!

Dimensions: 4.00" x 2.30"

9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.

9 volt Battery

Buffered Switching

Notes: Javelin is a module that is basically an ADSR envelope with integrated VCA. However, it has several features that make the module an expressive sound shaping tool.

Three level ranges determine the total amplitude of the envelope, additionally three different time ranges are integrated, which can be switched between.

The accent behaviour is also unique. If several gates are applied to the Accent input at the same time, the envelope rises slightly with each gate.

Features:

Attack-decay-sustain-release envelope
Integrated VCA
Unique accent behaviour for expressive sequences
Reset input
CV control over attack and release
Looping mode for LFO-like modulations
Mode switch for gate and trigger behaviour
Linear, moderate or steep exponential shape
Short hold in the peak of the attack for more punch
Power consumption: 93mA at +12V and 65mA at -12V

Depth: 38mm

HP : 6

Notes: Sometimes real precision is required with pitch control voltages - this module features a super accurate "Cal" output, which is accurate to <1mV over 20V, translates to one cent over 20 octaves! It is ideal for calibrating the scaling of VCO's, indeed we have been using our own version of this circuit to calibrate our own MiniMod VCO's for the last three years.

As well as being a precision voltage source it is also a very accurate voltage adder, it has two channels (A & B) and both full volts (octaves) or 1/12th volt increments (notes) can be either added to or subtracted from the incoming signal. Perfect for adding a voltage offset to the output of a sequencer or it can be used to add switchable octaves to a VCO which only has course and fine tunes controls.

It also has a "mix" output, which allows either A channel on its own, or with the three way toggle switch channel B can either be added to, or subtracted from channel B, and this is in addition to the addition and subtraction per channel mentioned earlier.

Dimensions: 10HP wide, 26mm Deep

Notes: Belgian analogue innovators Joranalogue serve up an ultra-versatile filter module. Multimode flexibility meets self-oscillation for added sonic versatility. A hell of a lot of filter for the money.

Supplier's notes:
Representing the cutting edge in modular analogue voltage controlled filter (VCF) design, Filter 8 offers more possibilities and higher fidelity in 12 HP than ever before.

Starting from the classic OTA-style 4-pole cascaded lowpass (LP) topology, Filter 8 features separate LP outputs, each with their own character. Additional filter responses are achieved by pole mixing: 1-pole highpass, a special band boost and notch response, phase shifter and 4-pole bandpass. All outputs are available simultaneously.

Key to Filter 8's performance is the innovative resonant feedback circuit. By increasing the resonance, all outputs will resonate at the filter frequency, without any low frequency response loss. At higher resonance levels, self-oscillation is achieved, turning the module into an excellent 8-phase sine wave voltage controlled oscillator (VCO) with temperature and switchable gain compensation, low distortion, constant amplitude and accurate frequency tracking over at least 5 octaves. At sub-audio frequencies, Filter 8 can function as an 8-output voltage controlled slew modifier or 8-phase low frequency oscillator (LFO).

Simultaneous exponential and linear frequency modulation is possible, for classic FM tones or chaotic modulation. A hold feature is also provided, 'freezing' the output voltages manually or under gate control. This is useful for halting modulations, or as a sync-like effect at audio frequencies. The dedicated 'ping' input allows you to easily create crisp percussive sounds with different timbres.

While rooted in the legacy of classic synthesisers, Filter 8 provides a new approach to musical signal generators and modifiers: instead of simply a VCF, VCO, slew modifier or VCLFO, a single analogue module can now be any of those, and anything in between.

Notes: Any signal can be expressed in terms of a few parameters: frequency, phase, amplitude and timbre. It is through modulation of these aspects that synthesists create electronic sound. With Generate 3, it is now possible to create a signal and control all its parameters by through-zero modulation within a single 12 HP wide module.

Everything starts with the exceptionally precise triangle-core voltage controlled oscillator (VCO) at the module’s heart. Through-zero linear frequency modulation (FM) enables rich yet pitch-stable FM sounds, by allowing the oscillator to run backwards into ‘negative frequencies’.

The resultant triangle wave is then processed by the through-zero phase modulator, providing a total phase shift range of 900°. Phase modulation offers an interesting alternative for FM, as it enables deep FM-type tones without actually changing the oscillation frequency.

The timbre of a signal is determined by its harmonic content. This full set of harmonics can be grouped into three main parts: the fundamental, even and odd harmonics. Generate 3’s harmonics generator separates out these three timbral ‘channels’. By adjusting their relative amplitudes, a vast array of different waveforms can be created, including but not limited to the classic sine, saw and square waves.

While the amplitudes can be adjusted manually, each timbral channel supports through-zero amplitude modulation, also known as balanced or ring modulation. When audio-frequency modulation signals are applied, the harmonics become ‘split’, enriching the spectrum.

In addition to all the usual analogue synthesis techniques, the extensive set of modulation options makes Generate 3 especially suited for exploring multiphonic synthesis: a monophonic source creating a complex timbre, much like throat singing, yet by electronic means.

Notes: The Triple Waveshaper (TWS) is a non-linear modifier which can transform a sawtooth wave into a sine wave. This classic module incorporates three independent waveshapers for modifying synthesizer waveforms or for processing signals from preamplified instruments. Although originally designed as a waveshaper for early Serge oscillators, this module has been found to be a excellent modifier of electronic and acoustic sounds, and is highly recommended for subtle timbral modifications beyond the range of simple oscillator/filter patches.

The R*S version extends the classic TWS concept:

+1: An additional (4th) waveshaper has been added (right after the first / bottom waveshaper) that can be dialed in smoothly using the +1 knob. Turned down (CCW) the bottom section acts as in the original (as if that additional waveshaper would not exist). Turned up (CW) the bottom section is actually 2 waveshapers in series.

Switches to link the 3 sections - bottom to top. Using these switches all sections can be set to act in series, starting at the bottom and ending at the top, providing the combined effect of 3 to 4 waveshapers (or anything in between) using the +1 knob.

Linking only the middle and top section and turning the +1 knob up (to have 2 sections in the bottom) allows you to use the module for isntance as two independent 2-stage waveshapers (using bottom in and out for one and middle in and top out for the other) - e.g. for stereo processing.

Notes: Updated version of a truly pioneering Eurorack module that introduced DSP effects to the format. Still sounds great, still versatile, still excellent value.

Supplier's notes:
Back in 2008, the original Z5000 was not only the world's first Eurorack DSP effects module but also the first Tiptop Audio module released. It brought voltage controlled digital effects to Eurorack for the first time and the Z5000 was eventually replaced by the Z-DSP open source platform. Now, years later with over a decade of experience developing audio effects for Eurorack signals we are introducing a totally new version of the Z5000: a compact stereo 8HP multi effect with voltage controlled parameters, VC analogue clock generator driving the DSP chip and 24 of our creme de la creme reverbs, delays, modulation, harmonization and pitch modulated effects. A number of programs in the Z5000 combine more than one effect, in series or parallel, that represent studio techniques from the early days till modern times often leaning toward the more experimental side.

Notes: ZVERB is a collection of all new reverb algorithms developed by Tiptop ranging from typical reverbs to more complex effects that combine delay and pitch shifting with reverb. The effects are grouped by decades based on either the era an algorithm was introduced or the time when the effect was most popular. This variety of reverbs covers small to epic size spaces with the addition of shimmering, feedback tunnelled pitch shifting, tape delay drivers, gated reverbs and a lot more. Analog clocking of the DSP chip and CV over the parameters enables even more experimentation. This is a collection inspired by the best from the past right at your fingertips.

Notes: With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we're able to offer our customers the sound quality they deserve!

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7" singles
Power supply
Allen key, stylus pressure gauge

Notes: Special edition of one of our favourite 303 clones. Fully analogue tribute to the Roland original with incredible sound. Authentic acid at a very nice price.

Supplier's notes:
A full analog synth clone of the famous TB303, coming with a lot of new features and improvements, from the sound point of view as well as the ergonomics of the machine and the sequencer.

A new design, new pots very smooth, new features for Live jam, 2 new sequencer modes for even more creativity, added CV / Gate (and even more) outputs to play your favorite synths !

The design of the analogue circuit (composed of 1 VCO) and the audio engine has been improved compared to the previous version, giving it a warm and groovy sound thanks to the addition of the Shuffle (not present on the original) .

The very intuitive sequencer takes on the original spirit while bringing new and unique features such as Mute and Hammer, which gives it a great flexibility for live jam and more sound variations, as well as 2 new sequencer modes to create New patterns.

Notes: Clever little valve-based headphone amp from Korg's NuTekt DIY range. Some basic assembly required but no soldering. Fully customisable for advanced users.

Supplier's notes:
The HA-S is a Nutube-equipped DIY Headphone amp kit that will let you enjoy the highest quality audio anywhere. No soldering is required, so even if you are new to the world of DIY, you will be able to assemble the HA-S to add a warm, analog tube-driven signal boost to any sound source in no time! Build your own Headphone amplifier This DIY HA-S kit allows you to build your very own Headphone amplifier in an easy and fun way, without any soldering needed. Not only that, it provides the authentic vacuum tube sound that audiophiles know and love. Built-in Nutube Nutube is a new and revolutionary fully analog vacuum tube developed by KORG INC. and Noritake Itron Corporation. The same as a conventional vacuum tube, Nutube is constructed with an anode, grid and filament, and operates as a complete triode tube, effectively generating the response and same rich harmonic characteristics of conventional vacuum tubes in a more compact, stable and energy-efficient way. The transparent case of the HA-S delivers a glimpse into this technology; allowing the glow of the tube to be visible at all times. Energy efficiency The filament of the Nutube is powered by a DC to DC converter, which consumes less electric current and thus allows for a longer battery life than other vacuum tube equipped amplifiers. The design is so efficient that the HA-S can drive the Nutube with a line voltage of 26 V using only two A4 batteries., for a rich and authentic vacuum tube sound. Sound possibilities The HA-S has a special NFB (Negative Feedback) switch, that allows you to choose from a high fidelity clean and pristine sound, or a warmer, more harmonically rich sound as expected from a vacuum tube. When the NFB switch is OFF, the harmonics present in the Nutube (triode tube) will be amplified to create a sound rich in harmonics, warmth and textures. When the NFB switch is ON, the distortion ratio and frequency characteristics will be modified, creating a really detailed and clean sound. For further sound modification, we have included two OP amp options for the output: the premium audio oriented "MUSES01" and the industry standard NJM4580, both from JRC. These can be easily replaced so even the most purist audiophiles will be able to customize and adapt the sound of their HA-S to heir heart's content. For advanced users who want to customize their amplifier even more, the circuit diagrams are readily available, making it really easy to change discrete components and make your own and unique headphone amp matching your desired tone and performance -, the possibilities are endless!

Notes: Exciting home studio interface from one of the leading names in high-end studio tech. 2-in, 2-out design with high quality pre-amps and a 'Legacy 4K' option to add analogue flavour. Full review coming soon.

*** New Loopback feature - May 2023 ***

Loopback allows you to take the output audio stream from your SSL 2 or SSL 2+ and record it back into the DAW (or another application). This can be really useful for music makers, podcasters and streamers.

To take advantage of the new loopback feature of the SSL 2/2+ you will need to update your SSL2/2+ using the SSL USB Audio Firmware updater.

Supplier's notes:
Solid State Logic studio tools have been at the heart of music production for over 40 years, helping world famous artists, producers and studios to create so many of the records you've come to know and love. Now, with SSL 2+, you get all that hit-making know-how in your own personal studio.

With beautifully SSL-designed analogue microphone preamps and immaculate 24/192kHz conversion for studio-quality recording, pristine monitoring paths and high-performance headphone amps for crystal-clear playback and an intuitive front-panel low-latency monitor mix control, you're always ready to capture the next great performance.

The 'Legacy 4K' mode - inspired by classic SSL consoles, gives you the ability to add extra analogue character and sparkle to your sources when needed.

To top it all off, the included 'SSL Production Pack' software bundle, which includes some of SSL's own studio-grade Native plug-ins and a carefully selected range of DAWs, samples, loops and virtual instruments from industry leaders, gives you an incredible arsenal of tools for creating your next hit.

2X Class-Leading Mic Preamps (130.5dB EIN / 62dB of Gain)
Pro-Studio Quality Neutrik Connectors and Alps pots
2X High Current Headphone Amp with independent monitor mix
24-bit / 192 kHz AKM Converters
Legacy 4K Analogue Enhancement - Inspired by SSL4000 series console
MIDI I/O
Additional un-balanced Outputs for DJ Mixers
SSL Production Pack - Exclusive software bundle
Advanced Workflow Technology utilised in ergonomics, layout and metering

Notes: Feature-packed interface and control surface bundled into one box, allowing you to get audio in and out of your software while also taking control via a long channel fader, transport controls and more

Supplier notes:
When you're a solo artist, you have to be more than just creative to realize your visioniyou must also be a producer and an audio engineer. The ioStation 24c audio interface and production controller provides the tools needed for all of these diverse roles in a compact, ergonomic desktop design that will fit into any home studio. Record your audio through two pristine XMAX mic preamps and high-definition 24-bit, 192 kHz analog-to-digital converters. Navigate your recordings with easy-to-use transport controls. Edit your production and automate parameters in your favorite DAW with the powerful Session Navigator and mix it all with a 100 mm touch-sensitive motorized fader. Whether you're a musician producing your latest album or just getting started with your first podcast, the ioStation 24c gives you all the tools you need to record and mix with the ease of hands-on, tactile control- all in a single device that doesn't clutter your creative space.

Audiophile-grade digital converters and transparent preamps create a superior recording and listening experience. The ioStation 24c audio interface features two of PreSonusr' acclaimed XMAX Class A analog microphone preamps that deliver incredibly high headroom, deep lows, shared smooth highs, and a rich overall sound- you'll hear every breath, transient, and detail in your recordings. High-quality converters provide 115 dB of dynamic range to capture complex musical harmonics smoothly and naturally. The result is clear, consistent audio that makes mixing easier and creating a polished sound faster.

Rather than forcing you to reinvent your mixing method, the ioStation 24 augments the way you currently mix. You will still use your faithful keyboard and mouse for things they do well, while the ioStation 24c handles what you really want to get your fingers on: your mix. This is DAW control the way you always hoped it could be!

Streamlined workflow and support for the Mackie Control and HUI protocols make it fast and easy to control Pro Tools, Logic Pro X, Cubase, Ableton Live, and more. No driver installation is necessary; just plug in your ioStation 24c and take command of your mix. Deep integration with the included PreSonus Studio Oner Artist will let you mix at lightning speed.

Seamlessly integrated with the included PreSonus Studio One Artist music production software, the ioStation 24c audio interface works with virtually all macOSr and Windowsrx recording software. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools or hemmed in by track limitations. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content and upgrades without even opening your browser- you'll build the version of Studio One that's right for you. By combining a flexible single-window user interface with a modern, beat-based production workflow, Studio One's drag-and-drop approach doesn't dictate how you work or what you work on; you do.

The ioStation 24c's unique Session Navigator is your caffeine-fueled assistant engineer, providing easy access to eight mission-critical functions for maximum flexibility. Use the large encoder button and companion buttons to edit and mix with greater efficiency and speed. Scroll through your timeline using the encoder or work measure-by-measure with the arrow buttons; zoom in and out on the timeline with the encoder and make your tracks larger or smaller with the arrow buttons; navigate and drop markers; and maintain constant control of your main level. Once you start using the Session Navigator, you'll wonder how you mixed without it.

Whether you're just getting into audio production or looking to streamline your recording rig, the ioStation 24c audio interface and production controller will give you clear, clean, ultra-high-def sound with professional mixing tools in a compact, space-saving design. While it's a perfect companion for any recording software, the ioStation 24c and included Studio One Artist provide you with a complete, affordable recording solution that will make you sound great.

This suite of plug-ins adds a wealth of fresh virtual instruments and effects to Studio One. Cherry-picked from the first names in virtual instruments and effects, each plug-in brings a different flavor of practical magic to your songs. These plug-ins aren't gimmicky one-trick ponies i these are real-deal workhorses that you'll rely on for countless mixes.

Notes: Part of Sonicware's Liven groovebox series, the 8bit Warps draws on retro 80s chiptune vibes to create a mini instrument with huge character and surprising range.

*** Update: New features of the version 3.0 firmware September 2023 ***

Added 6 effect types:
- Distortion
- Phaser
- Tremolo
- Ring Modulator
- Auto Wah
- Reverse Delay

Added the Sound Locking features

A sequence can be duplicated to double the length

Looping of chain playback is now possible

New preset 29 drum sounds that can be easily made drum patterns with the sound locking feature

And several bug fixes and improvements

Supplier's Notes:
The LIVEN 8bit warps combines an 8-bit waveform memory synthesizer with a step sequencer.

Carefully selected preset waveforms and editable user waveforms along with high-quality filters and effects can be used freely to create a wide spectrum of sounds. The LIVEN 8bit warps can generate classic retro game sounds of course, but its unique 8-bit sound can also be used in a range of music genres, including EDM, hip-hop, techno and rock.

Powerful functions for live electronic music performance include 16 physical control knobs, parameter locking for each sequencer step, a looper, and SYNC IN/OUT and MIDI IN/OUT connectors to make synchronized performance with other equipment easy.

All these powerful functions are in a device that weighs only 790 g. Play it anywhere at any time.

Size : 11.7 inch (W) x 6.92 inch (D) x 1.89 inch (H), 297mm (W) x 176mm (D) x 48mm (H)

Weight : 1.74lb., 790g

Accessories: Warranty

Power supply: AA batteries x 6, or 9V DC output AC adapter (1A or higher, EIAJ3 standard inner diameter 1.7mm outer diameter 4.75mm, center +)

Notes: Really clever noise-based oscillator from AJH. Drones, sweeps and bleeps aplenty, ranging from tamed to out-of-control filth. Also doubles up as a more conventional ring mod and distortion module.

Supplier's notes:
This 14HP wide module is a voltage controlled noise based oscillator, or noisillator for short. It generates 1/f noise and this is then sent through a feedback loop which allows the noise to be "tuned" to varying degrees depending on the settings of the frequency and resonance controls, or incoming frequency or resonance CV's. The tuned circuit can be FM modulated too, for some thunderous sweeping sounds. We have bright and dark outputs, which are pre and post filter respectively. The Bright output will always have a degree of noise present in the signal, whereas the Dark output can be tuned noise only when 4 pole resonance is selected. We also have an external Sync input, which will reset the resonant waveform, and we also have an Audio input, so that an external signal can be mixed into the resonant loop. Combinations of external waveforms to these two inputs can create some massive drone sounds, or sweeping sync sounds.

There is also an XOR ring modulator, which can be used as a module in its own right too. Lastly, we have an XOR amplifier, which is another independant circuit that can be used to add noise and distortion to any audio signal.

Notes: deton8 is a hybrid sampler/drum synthesizer using a mix of crunchy 8BIT samples and wavetable synthesis. and a plethora of real time fx and tricks.

Handle-assembled to order in France.

deton8 includes the following kits (but you will be able to upload your own samples):

DETON8 default (big beats, break)
AMY SISTER (jungle break)
HIP08 (for all your 808 hiphop needs)
TEK09 (Rave on)
MINTY POPS (Classic beats)
INDUSTRIAL (exclusive kit by our dear friend NKDM)
14 additional kits, thanks to Electronisounds!

Notes: Clever dual-mode envelope generator, designed to combine studio functionality with a safety net for live performance. Dial in a patch then switch to live mode for tweaking without losing control.

Supplier's notes:
The Quadigy is a complex envelope generator focused on live play. The goal is to allow the user setting up rich, interactive and dynamically evolving envelopes without the risk of breaking up a subtle and intricate patch once on stage. This is achieved by offering two main modes, one where full control is available and a Live mode where only the settings that are sensible using on stage are accessible.

Notes: Better known for analogue modules, it turns out Erica Synths are pretty damn good at digital too. Draw your own waveforms, build wavetables, tweak in real time and get freaky. Killer VCO.

Supplier's notes:
Erica Synths Graphic VCO allows you to draw your own waveforms, arrange them in wavetables and wavetable banks, morph between two selected waves and alter the resulting wave in advanced ways (FXes) - apply FM, phase distortion, ring modulation, wavefold/wavewrap, bitcrush.

Waves, wavetables, FXes and other settings can be saved and recalled from the memory instantly. The module has two outputs - the main output and the output with configurable suboscillator.

NB! To have the module functionality up to date, we recommend you to check the Erica Synths home pageor our social media from time to timefor announcements about firmware updates for the Graphic VCO. You can update the firmware of the module via miniUSB cable. More detailed instructions of the firmware update can be found in the User Manual.

The sound is clean, modern, punchy and detailed thanks to the unit running at 96kHz - quite different to some low bit-rate wavetable oscillators on the market. Wavetable interpolation is smooth as butter and with the built-in effects you can dirty things up in many different ways. The module scores highly on the sound front. The Graphic VCO is a very capable oscillator module with excellent sound quality and a lot of features that could make it the right choice, especially if live performance is your thing. - Sound On Sound
The bottom line is that the Graphic VCO is a joy to use. It's a module that's unashamedly digital, yet unmistakably eurorack. I think Erica showed a great deal of careful judgement and restraint in the design of this module. It would have been easy to have made it bloated and cumbersome trying to cram as many features as possible into it, but they kept it fairly simple which keeps the module fun and immediate in use. It's capable of a huge tonal palette ranging from beautiful to brutal that is bound to fit in with a lot of different styles and systems. - Ask Audio
The ability to draw and then effortlessly jump between different custom digital waveforms in this way feels unique on the Eurorack stage, and allows for a wide range of tones and transitions between them. - Orb Mag

Technical specifications:

Audio output amplitude
10Vptp
Octave range
C0-C8
Sample rate
96kHz
Unipolar CV input range
0 -+10V
Bipolar CV input range
-10V -+10V
Panel Width
16 HP
Module depth
30mm
Power consumption
152mA@+12V,
20mA@-12V

Notes: For a more precise control and enhancement of your sound, XU models of the MG Series come equipped with a suite of Yamaha's renowned SPX effects. Featuring high-resolution Chorus, Flanger, Distortions, Reverb and Delay, all with editable parameters, these are the same multieffects processors used on Yamaha's high-end mixing consoles, giving you the tools you need to elevate your mixes to a higher plane.

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction. With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

Yamaha has always strived to provide sound engineers with the purest possible signal instead of added processing or color to give it a "signature" sound, and the MG Series is no exception. Embracing this philosophy of transparent sound, these mixing consoles deliver a level of sonic purity and sound quality that is unmatched in their class.

Everything you do as a sound engineer is dependent on the quality of your preamps, which determines the direction your mix will take, and ultimately how good it is going to sound. MG Series mixing consoles feature Yamaha's studio-grade discrete class-A D-PRE preamps, which utilize an inverted Darlington circuit comprising two cascading transistors in a configuration that provides more power with lower impedance. Delivering fat, natural sounding bass and smooth, soaring highs, with very low distortion, D-PRE preamps possess an impressively wide frequency range that allow them to handle signal from any audio source without overly amplifying any specific elements of the sound.

The head amp determines sound quality, and op-amp integrated circuits are one of the most important parts in the head amp circuit. MG Series mixers feature new, high-quality, custommade MG01 op-amps that we developed in cooperation with the semiconductor manufacturer. Although many other Op-amps prioritize electrical design and efficiency, we worked directly with the semiconductor manufacturer to focus on sound quality first.

With phantom power, MG Series consoles allow you to take full advantage of the greater frequency response and high sound quality of condenser microphones. The input channel with PAD switch accepts MIC to line level of inputs, PAD Switch attenuates high input signals that often accompany mic'ed instruments during performance, avoiding the clippingthat can seriously affect your mix.

Notes: The DJ200i is the premium DJ cartridge from hi-fi specialists grado. Hand engineered for a premium quality, rich, warm and unique sound, the DJ200i is built and designed to meet the demanding needs of the professional DJ. A step above anything else in this price bracket, and many cartridges priced significantly higher.

The grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The prestige model DJ200i uses a modified 4 piece otl cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing for possibly, the most advanced DJ cartridges ever offered to the professional DJ market.

Notes: Voltera is an expander for the Metron trigger and gate sequencer, adding 4 bipolar voltage tracks. Up to 16 Volteras can be connected to a Metron, providing up to 64 CV outputs.

With independent voltage ranges and quantisation settings per track, Voltera allows simultaneous real-time control of 4 different parameters, so you can set the track to the parameter you are sequencing.

When used in conjunction with Voltera, it is possible to easily sequence melodies and parameters with the Metron.

Features

4 bipolar voltage outputs in 4HP
Integrated user interface with Metron
Quantised and unquantised voltages
Up to 16 Voltera modules can be connected simultaneously to a Metron
Independent voltage ranges for each output
Analogue programming
Digital accuracy
Fast haptic operation
Power consumption: 60mA at +12V and 15mA at -12V

Depth: 43mm

HP : 4

Notes: The polyphonic BASS9 Bass Machine transforms a guitar into nine different basses and requires no special pickups, MIDI or instrument modifications. It relies on the same technology powering all EHX 9 Series pedals, like the award winning MEL9r Tape Replay Machine, but features a new algorithm maximized for transposing one to two octaves down with superior dynamics and tracking.

A rotary switch allows the user to select the sound of their choice, as follows:
PRECISION: Pays homage to the iconic Fender P Bassr
LONGHORN: Emulates the Danelectror 6-string bass, ideal for baritone type tones
FRETLESS: Features both electric and standup fretless basses.
SYNTH: A tribute to the classic Taurusr Synthesizer
VIRTUAL: Lets the user adjust the bass's body density and neck length for a variety of bass sounds
BOWED: Classic bowed bass
SPLIT BASS: Makes it possible for the guitarist to play bass on the lower strings (all notes below F#3) and chords or melody with the higher strings.
3:03: A polyphonic salute to the sought after Roland TB-303r vintage bass synth
FLIP-FLOP: Inspired by EHX's Octave Multiplexer, it provides a '70s style logic driven sub-octave generator that tracks without glitches.

The pedal is equipped with independent Effect and Dry volume controls so guitarists can precisely tune their mix at the Effects output jack, plus an always-active Dry output jack that outputs the input signal at unity gain.

Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs. For example, in PRECISION, CTRL 1 controls the sub-octaves while CTRL 2 imitates the original instrument's tone control.

Note: All third party trademarks referenced by EHX remain the property of their respective owners. Unless specifically identified as such, EHX's use of third party trademarks does not indicate any relationship, sponsorship, or endorsement between it and the owners of these trademarks. Any references by EHX to third party trademarks is to identify the corresponding third party goods and/or services and shall be considered nominative fair use under the trademark law.

Pays homage to nine of the best bass sounds ever
Tracks impeccably and works on guitar without mods, special pickups or MIDI implementation
Independent Effect and Dry volume knobs let you precisely control your mix at the Effects output
Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs
Dry output jack outputs the input signal at unity gain
Compact, rugged, easy to use
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Selectable Buffered Bypass
Audio
Mono
Power Supply
9.6VDC-200mA power adapter included
Dimensions (in)
4.75 x 4 x 2.25
Current Draw
100mA
Year Released
2019

Notes: Expander module for the Tetrapad, Intellijel's multi-dimensional performance touch controller. Adds huge functionality, allowing you to sequence parameters and create complex modulation.

Supllier notes:
Tete is the long awaited and highly anticipated expander for the Tetrapad.

Some of the key features:

Three primary modes: VOLTAGES, NOTES and COMBO.

VOLTAGES mode:

Up to 16 voltage storage locations (grid) with 8 voltages stored at each location.

You have the choice to record and playback your recall of these locations in a looper style (just play freely and spend arbitrary amount of time at any location) or as a clocked sequence (SH-101 style). Additionally you can traverse the matrix using the X and Y CV inputs to get Cartesian style sequencing.

There is also variable slew that allows you to morph/glide between the values.

NOTES mode:

You can create sequences or loops in chord, scales or keyboard mode. The isomorphic keyboard grid can vary from 4 notes to 12 notes max. There are real-time performance looping, transposition and inversion capabilities via the CV inputs and dedicated loop button. In sequencer mode each step can be a tie, rest, or gate with size 25/50/75%. Basically we have created a way to very quickly and intuitively make chord sequences that are very musical and easy to manipulate. It is difficult to summarize in words but we will be sure to create some videos to demonstrate how easy and fun this is to play with. It definitely represents something unique in the landscape of Eurorack sequencers.

COMBO mode:

In this mode you can loop record your performance on any combination of the following functions:

fader, bipolar fader, drum hit, switch or LFO. Kind of like Elektron style parameter locking but all of the motions is recorded continuously instead of just in slices. Instantly turn a simple patch into a highly animated and complex beast.

With all of the above mentioned loop recording modes you can very easily overdub since the Tetrapad detects pressure/pressing. In combo mode you can erase individual channels.

All modes allow for internal or external clocking and configurable syncing.

All of the modes have special XYZ CV modulation assignments and make use of the dedicated CV outputs.

For example, in Looper mode one of the CV outputs generates a continuous ramp that represents the position in the loop. This can be used with devices like the Planar 2 in Interpolation mode to sync the recorded patterns together no matter what tempo.

Notes: Ten-channel version of Mackie's new compact ProFX mixer, ideal for home studio use or small live setups. Built-in USB interface and digital effects section. Great value.

Supplier's notes:
The Mackie ProFX10 v3 10-Channel Professional Effects Mixer with USB is the ultimate affordable solution for live sound, home recording, and content creators. Now with our renowned Onyx mic preamps that offer 60db of headroom, everything from gain hungry mics to guitars will sound better than ever, and you can keep it all in check with simple single-knob compression. The new GigFX effects engine offers 24 built-in FX for even more options for adding the finishing touch. Record your tracks in 24-Bit/192kHz quality with 2x4 USB I/O plus zero-latency hardware monitoring for easy overdubs. Both ProTools First and Waveform OEM recording software/plugin packages are included.