All genres charts

Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-130:

Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

5.1"x6"/13x15cm Short: 2.7"/8cm Tall: 8"/20.3cm 20 lbs/9kg

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-200:

Designed for larger speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

7.8"x10"/20×25.4cm Short: 3.5"/12.5cm Tall: 8.75"/22.5cm 60 lbs/27.2kg

Notes: Engineered specifically for the Native Instruments Kontrol S61 MK2 Keyboard Controller. Custom moulded to fit the contours of the S61 MK2 whilst leaving USB connections in place, the Kontrol S61 MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or controller bag for maximum protection. Don't go losing your keys.

Notes: Become an instrument with 'the sound of me', based on motion sensor wristbands and wireless receivers, sending MIDI signals to software and hardware.

Supplier's Notes:
SOMI-1 MIDI Controller

Key Features:

Sensors:

Up to 6 sensors simultaneously (add more sensors)
7 different 3D movement parameters per sensor
9-DOF state-of-the-art sensor fusion
Wireless via Bluetoothr 5 based custom protocol
Low latency under 10ms (no perceivable delay)
High Precision (ca. 0.01 degrees)
Range up to 50 meters (164 feet)
Up to 30 hours battery lifetime

Receiver Hub:

MIDI 1.0 Interface (USB-MIDI, TRS-MIDI, MIDI Host)
Connectivity to music software & hardware
Button to pause sensors and MIDI mapping
Encoder to adjust sensitivity
MIDI:

MIDI Note, Control Change and Pitch Bend signals
Adjustable MIDI channel
Direct connection to music software and hardware (no extra drivers or software needed)

Editor:

Scale individual sensor values
Inverse sensor values
Slew limiters for smoothing
Customize MIDI Note range and threshold
Change MIDI Control Change controller
Enable high resolution (14 bit) Control Change
Save settings directly on the SOMI-1 hub
Integrated editor for Ableton Live (Max for Live)
Ableton Live preset projects
SOMI-1 smartphone app (approx. January 2023):

Several different sound presets
No need of additional software or hardware
UI for easy usage without musical or technical pre-knowledge

Includes:
2× SOMI-1 Motion Sensor
2× SOMI-1 Wristband
SOMI-1 Receiver
SOMI-1 Sound app (approx. January 2023)
USB-C cable

Notes: Solenoid push-pull motor for use with the Field Kit DC interface. Use this to get sounds out of objects by hitting them. Who doesn’t like hitting objects?

The DC interface of the Field Kit gives you the possibility to trigger the solenoid rhythmically and control its force.

Notes: Clean up that patch with a package of 8 Modbap Stubs Patch Cables. Stubs are 3" (8cm) long Eurorack patch cables available in four colors variations - pink, blue, white, and black.

Features

Short length patch cables
3" (8cm) long
Pack of 8 cables
Right angle
Modbap brand logo molded
1/8" to 1/8" (3.5mm to 3.5mm)
Mixed Pack of Pink (2), blue (2), black (2), white (2).

Notes: The 2M is a dual three channel mixer in 6 HP with volume controls over all the inputs as well as the final output. As its design has been specially focused on audio applications, the input potentiometers are audio-taper type while the output ones are linear. Low distortion / high quality audio operational amplifiers have been selected in order to achieve clean audio mixing, but is also DC-coupled, so it can perform CV signal mixing as well. Great for a small system, allowing for submixes or even stereo mixing.

Technical specifications:

6HP.

38 mm depth.

Consumption: +/-12V 20mA

Notes: The 8S is an 8 step sequencer in 8 HP with control over some parameters of the sequence as reset, hold, random step and direction. The inputs have been designed to work with clock related signals like triggers or gates but any type of CV signal can be used. The output signal path is completely analog and its range can be set to unipolar (0 to +5 volts) or bipolar (-5 to +5 volts) via jumper on the back of the module.

Technical specifications:

8HP

38 mm depth

Consumption: +12V: 25mA ; -12V: 5mA

Notes: Spring tank for use with the Field Kit FX. This is a 8BB3C1B tank with 3 springs (23.5cm length each) and long decay time of up to 4s. Input isolated, output grounded.

A short and shielded RCA is recommended (available elsewhere). If you have a cable of your own, take the shortest one that fits your needs and make sure it's properly shielded.

Keep the cables and tank away from noise sources as much as you can, especially power adapters and power cables.

Please note: there is no cable included with this product.

Notes: Spring tank for use with the Field Kit FX. This is a 8BB3C1B tank with 3 springs (23.5cm length each) and long decay time of up to 4s. Input isolated, output grounded.

The short and shielded RCA cable offered with the tank is recommended. If you have a cable of your own, take the shortest one that fits your needs and make sure it's properly shielded.

Keep the cables and tank away from noise sources as much as you can, especially power adapters and power cables.

Notes: The UDG Ultimate Headphone Jack Adapter Screw 3.5mm (1/8") to 6.35mm (1/4") connects your headphone's mini-jack plug to a larger stereo jack output. It has a grippy surface to help you grab hold of it. The gold-plated adapter provides a solid connection without compromising sound quality.

Specifications

Colour: Gold
Weight: 0,01 kg
Outer Dimensions (W x H x D): 4.5 x 1.0 x 1.0 cm | 1.77 x 0.39 x 0.39 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Gold-plated contacts
Adapter Stereo Mini Jack F / Stereo Jack M (Screw-in)
Nice grippy surface to help you grab hold of it

Extras

High-end realisation
Stereo jack adapter - 3.5mm (1/8 inch) mini jack socket stereo - 6.35mm (1/4 inch) jack plug stereo

Fits: Fits correctly on most headphones - Just screw and play
Please note that this 3.5mm female ports only compatible the 3.5mm male cable with screw threaded

Notes: Keep it all organized with the KOMA Kabelhanger! By placing your cables directly on a hanger as part of your case, they are always in arms' reach!

Use Koma's tourproof screws (sold separately) to go with your Kabelhanger and your case gets travel-ready in no time.

Notes: ***B-STOCK: Box opened, product in perfect working order***


CAIXA 104 is an advanced fully portable 104HP Eurorack Modular Case, with a wide range of utilities fully integrated on it. Connect up to 19 modules and carry it anywhere you go thanks to its handle.

Nano Modules designed CAIXA 104 to provide a solid base for starting your modular journey and squeezing every centimetre of your system in case you're already an experienced Eurorack-head.

7 integrated modules

19-slot busboard with reversed protection headers

A selection of utilities that everyone usually needs to have in their modular synthesizer, just like the Buffered Multiples, the Stereo Mixer or its 2 LFOs.

Nano Modules have also focused on improving connectivity with the integrated inputs and outputs.

19-slot busboard with reversed protection headers

+30W power supply - An efficient and reliable supply which is more than enough to provide plenty of power for a 104HP system (and more).
+12V output at 1.25A
-12V output at 1.1A
+5V output at 0.5A

Deep enough.
The maximum module depth above the busboard connectors is 47mm, but you can place modules up to 60mm outside of the busboard space. That should be sufficient to fit the vast majority of modules out there.

Carry your synthesizer anywhere you go.

The lightweight aluminium, together with the handle, make it super easy to take your modules with you. Weighs only 1.7 Kg!

Utility Modules
Balanced Inputs
Buffered Multiples
Precision Adder
2 LFOs
Sample & Hold
Stereo Mixer
Stereo & Headphone Out

Power Specifications

30.7W Integrated switching power supply with Meanwell 60W power brick.

+12V output at 1.25A
-12V output at 1.1A
+5V output at 0.5A

Construction

Dimensions: 535 x 200 x 85 mm
Materials: Anodized aluminum
Aluminium extruded rails with steel threaded inserts
Rubber feet to protect your desktop.
Depth Maximum module depth -> 47 mm inside busboard space, 60mm outside.

Notes: Strom+ is a strong, reliable and safe 4HP power solution for your modular system. The Strom+ power module includes many safety mechanisms to prevent your modules from being damaged. These include most importantly short-circuit protection, overvoltage protection and a replaceable main input fuse. See the full list below.

Strom+ also offers a current sensing technology that indicates current consumption of your system. LEDs of each rail will turn orange then red, when current consumption reaches or crosses the maximum load of that rail.

Strom+ has extremely low ripple, even under full load. This means better sound and stability for your modules.

One module can power multiple skiffs via Strom Passive Module, a Strom Connector Cable, or a KOMA Strom Busboard.

Technical Specifications

Inputs and Outputs

Output: 1.5A @ +12V | 1.5A @ +5V | 1.0 A @ -12V
Input: 15V, 4.6 A (center positive)

Safety Mechanisms

Replaceable input fuse. Protects the wall-plugged adapter. The KOMA Strom AC/DC adapter actually has its own protection mechanisms and will itself shutdown in most cases before the input fuse trips.
Input overvoltage. Strom+ works up to specification from 15V - 20V input and works out of specification up to 28V input.
Input reverse polarity protection
Output overvoltage protection
Output short-circuit protection
Output over current protection
Output undervoltage protection
All above output protections independent for each rail. If any rail fails, the whole module shuts down.
Connectors and Controls

Main DC-Input (15 VDC)

On/Off switch
Front panel connector to a passive Strom module
2 standard Eurorack 16-pin connectors (for modules or a flying busboard)
Back panel Strom connector to solid busboards

Dimensions

4HP
48mm without Eurorack power connector connected (distribute power via Strom connector cable)
52mm with Eurorack power cable connected

Notes: This is the powered version that includes the case as described here, a Strom+ module, a Strom power supply (AC/DC adapter) and a Strom busboard with connector cable. You only need to plug modules into the case and you’re ready to go!

One case fits 84HP of modules with a depth of 70mm.

The cases can be used with an incredible amount of flexibility to swap in an out full rows and create larger setups using the Case Connectors and Case Standoffs.

The side cheeks are made of high-quality Finnish plywood and are coated with a durable transparent melamine film. The black surface is hardwearing and crack resistant as well as easy to clean.

All cases are shipped with a set of 4 rubber feet and 50 x M3 screws.

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: The DigiTechr Mosaic Polyphonic 12-String effect pedal sets you upon the path of creating lush 12-string sounds with either 6-string electric or amplified acoustic guitars. Immediately identifiable 12-string tones are now yours with octave low strings and doubled high strings. Single notes and full chordal strums shine with polyphonic richness and celestial movement that will inspire you. The Mosaic's balanced low-end response with crisp octave shimmer produces a tone that's lush and articulate, just as with a 12-string guitar.

Tailor the Mosaic's sound with the independent Level and Tone controls. Level will control the 12-string effect intensity while Tone shapes the overall brightness of the effect. The Mosaic will give you a richer, more resonant and full tone than a standard six-string guitar. It is true bypass and uses a 9V DC power supply to easily integrate into your existing pedalboard.


General Specifications
SAMPLE RATE

44.1 kHz
FREQUENCY RESPONSE

20 Hz-11 kHz (Effect Enabled)
SIGNAL TO NOISE RATIO

> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD

0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D/A CONVERSION

24-bit
INPUT

1/4" Unbalanced (Tip-Sleeve)
OUTPUT

1/4" Unbalanced (Tip-Sleeve)
CONTROLS

Level, Tone
TRUE BYPASS

Yes. True bypass circuitry preserves your tone when the pedal is not in use.
Dimensions
LENGTH

4.75" (120mm)
HEIGHT

1.75" (44mm)
WIDTH

2.875" (73mm)
WEIGHT

0.36 lb. (163g)

Notes: Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

1.0 lbs. (0.453 kg.)

Notes: Pairing an adjustable carrier signal with a revamped distortion circuit, the DOD Gonkulator essentially brings two effects into one chassis with controls for ring, frequency, gain and distortion. Capable of all the weird modulation goodness of the '90s original with the added ability to cover distorted experimental ground, this pedal pushes boundaries and makes statements with modulating effects limited only by imagination. From bell-like clangs to spastic robotic breakdowns, the Gonk demands attention.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

0.62 lbs. (0.281 kg.)

Notes: The latest and greatest version of one of the most popular microphones around. XLR and USB connections both offer warm sound suitable for vocals, instruments and podcasting.

Supplier's Notes:
The NT1 5th Generation is a revolutionary studio condenser microphone that fuses the classic sound signature of the iconic NT1 with cutting-edge, next-generation technology. It features RODE's groundbreaking (patent-pending) Dual Connect output, offering both XLR and USB connectivity for incredible versatility, a world-first "unclippable" 32-bit float digital output, advanced digital signal processing, and more, all while delivering the same warm, silky character, extremely low noise, and high SPL handling that the NT1 is renowned for. The NT1 5th Generation is a true studio workhorse that excels on everything from vocals and speech, to guitar, piano, drums and percussion - the ultimate studio microphone.

The Iconic Original Studio Microphone, Reborn

The NT1 5th Generation is the latest evolution of the iconic NT1. First introduced in 1991, the NT1 is the world's most popular studio microphone, renowned for its warm, classic sound and incredible versatility. The NT1 5th Generation takes the much-loved and respected core of the NT1 and introduces state-of-the-art features while preserving the legendary sound quality that made the original the go-to microphone for countless creators. A perfect marriage of tradition and innovation.

Game-changing Connectivity

Featuring RODE's groundbreaking, patent-pending Dual Connect output, the NT1 5th Generation can either be connected to an audio interface or mixer via XLR or directly to a computer via USB for studio-grade, plug-and-play recording. Unprecedented flexibility for any studio setup.

Classic Sound on the Cutting-edge

The NT1 5th Generation delivers the same warm, silky character, extremely low noise, and high SPL handling capability that the original is revered for, with improved circuitry for even lower self-noise - an astonishingly low 4dBA, making it the world's quietest studio condenser microphone. When using the XLR output, it delivers the rich, classic studio condenser sound you know and love from the NT1. When using the digital output, you get this same sound plus a slew of cutting-edge features to further enhance your audio for recording pro studio sound directly into your computer.

The Digital Studio of the Future

The NT1 5th Generation features a professional-grade audio interface built into the microphone, which is perfectly optimised to preserve its pristine audio fidelity and also offers a range of highly innovative features for enhanced sound, including the ultra-low-noise, high-gain Revolution Preamp™, high-resolution (192kHz) A/D conversion and advanced digital signal processing. This is so much more than just a studio condenser microphone, it's an all-in-one digital recording solution.

The "Unclippable" Microphone

The NT1 5th Generation features a world-first 32-bit float digital output - a revolutionary recording format that allows you to record everything from a whisper to a scream, the softest guitar to the loudest drummer without having to worry about setting your gain - simply adjust your audio after recording and all the dynamics of your performance will be maintained, with zero risk of clipping or distortion. Gamechanger.

Versatility Like No Other

With its smooth frequency response, extremely low noise, high SPL handling, flexible connectivity options and powerful digital capabilities, the NT1 5th Generation offers versatility like no other studio mic. It excels in any recording application, from vocals and speech to guitars, drums to piano, and can fit into any workflow, from a solo bedroom recording setup to a professional studio.

Craft Your Sound

Craft your sound with advanced APHEXr audio processing, driven by the NT1 5th Generation's powerful on-board DSP. Add compression, a high-pass filter, noise gate, and the legendary APHEXr Aural Exciter™ and Big Bottom™ to your audio with ease using the free RODE Connect and RODE Central companion apps. Dial in the perfect sound with the touch of a button using the intuitive VoxLab™ editor or fine-tune each processor using the advanced editor.

Premium Components, Built to Last

Made from premium components, the NT1 5th Generation is built to the highest standard in RODE's state-of-the-art manufacturing facilities in Sydney, Australia. The HF6 capsule is precision manufactured to sub-micron tolerances to ensure the utmost consistency in tonality and frequency response and is internally shock-mounted for minimising external vibrations. The body is machined from rugged aluminium and is available in black or silver, with high-grade finishes that are extremely resistant to scuffs and scratches, ensuring the NT1 5th Generation is ready to take on the rigours of recording day in, day out.

Everything You Need to Start Recording

The NT1 5th Generation comes with everything you need to start recording in the box, including XLR and USB cables, and a studio-grade shock mount and pop filter for minimising unwanted artifacts in your recording caused by plosives, knocks and bumps.

Unlock More Creative Potential with the RODE App Suite

The NT1 5th Generation is compatible with a range of free RODE apps, including the RODE Central companion app, RODE Connect podcasting app and UNIFY streaming app, all of which allow you to configure settings, access the advanced DSP, update firmware and more.

Specifications

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: Via XLR: P48
Analogue Output Connection: 3-pin XLR

Digital Specifications

Digital Power Requirements: Via USB: 5V
Digital Output Connection: USB-C
Bit Depth: 24-bit / 32-bit floating point
Sampling Rate (kHz): 48 / 96 / 192
Processing: APHEX digital signal processing (only available at 48kHz / 24-bit)
Minimum OS Requirements: Windows 10 Mac OS 10.15

Mechanical Specifications

Weight (grams): 308

Dimensions (millimetres):
Length: 52
Width: 52
Height: 189

Box Contains

1 x NT1 5th Generation
1 x SC29
1 x XLR-6
1 x SM6

Notes: Great value from this compact, portable multi-track recorder. Record instruments or vocals anywhere. Pre-loaded drum loops and built-in synth instruments help you get started.

Supplier's Notes:
The R12 Multitrak - Live to make music.

The R12 is made for musicians who live to make music. And they want the freedom to make music wherever they go.

All you need on-board

Compact and mobile, you can record and mix songs without a computer. Use the R12's full-colour LCD touchscreen to cut, copy, loop, and edit your tracks.

Amazing sound

The R12 has super-clean preamps and you'll love the way they sound. With two XLR/TRS inputs, and 8 tracks of audio, the R12 is perfect for recording everything from demos to release-ready songs.

Fully loaded

The R12 includes a send effects channel offering reverb, chorus and delay with a ddedicated effects return fader. For advanced tones, you can use presets and effects from Zoom's Guitar Lab.

Take it everywhere

The R12 provides up to 5 hours on four AA batteries allowing you to bring your production anywhere. Additionally, you can use the R12 with the included AD-17 power adapter, or a USB battery.

The R12 also has pan and a 3-channel EQ for each track and a compressor on inputs 1 and 2.

Playback. Play along.

Use Sequence Play to create a playlist of your projects. Then use them as backing tracks, whether you're playing live or rehearsing a set.

It starts with a groove

With 150 preloaded drum loops in a variety of patterns and genres, the R12 provides a versatile rhythm section for any project.

Import audio files

Add additional audio samples by importing files into your R12 via Micro SD card or USB thumb drive.

From headphones to monitors

The R12 includes an 1/8" stereo headphone jack as well as dedicated 14" monitor outputs.

Interface + control surface

Use the R12 as a stereo audio interface with your favorite DAW or streaming platform, via USB-C. As a control surface, the transport controls and faders make it easy to adjust and control your software during production.

Attention to detail

Connections

Connect microphones, instruments or line level devices like keyboards, mixers and more.

Hi-Z

Input 1 on the R12 has a Hi-Z switch, allowing you to plug your guitar directly into the recorder.

Phantom Power

Both inputs on the R12 offer 48V Phantom Power for condenser microphones.

Stay in time. Every time.

Activate the fully customizable click track with the press of a button. Click balance blends the metronome with your playback audio and routes it to your headphones and/or the main outputs.

Add some synth

The R12 has 18 FM synth instruments built in. They can be played by plugging in a MIDI keyboard via USB-C or programmed using the touchscreen.

What's in the box:
R12 MultiTrak
AD-17 AC Adapter
USB Cable

Specs

INPUTS / OUTPUTS
INPUTS - MIC/LINE (mono): 2
OUTPUTS - MASTER OUT: 1
PHONES: 1

INPUTS
MIC/LINE (MONO) Connectors: 2 XLR/TRS combo jacks (Balanced, XLR: 2 HOT / TRS: TIP HOT)
Input gain: +6 ~ +50 dB
Input impedance: XLR: 3.9 kO TRS: 3.9 kO/1 MO (when Hi-Z ON, INPUT 1 only)
Phantom power: +48 V (switchable separately for INPUTS 1 and 2)
Equivalent input noise: -121 dBu or less (IHF-A) at +50 dB/150 O input
Frequency response: -1.0/+0.5 dB: 20 Hz - 20 kHz

OUTPUTS
MASTER OUT - Connectors: 2 TRS phone jacks (balanced)
Maximum output level: +14 dBu
Output impedance: 200 O
PHONES Connectors: 1 stereo 3.5mm mini jack
Maximum output level: 45 mW + 45 mW (into 32 O load)
Output impedance: 10 O

RECORDER
Maximum simultaneous recording tracks: 2
Maximum simultaneous playback tracks: 8
Recording format: 44.1kHz, 16/24-bit, mono/stereo WAV
Recording media: Cards compatible with microSDHC specifications 4 GB - 32 GB

TRACK SETTINGS
EQ
High: 10 kHz, 12 dB, shelving
Middle: 2.5 kHz, 12 dB, peaking
Low: 100 Hz, 2 dB, shelving
Pan: L100 - R100

EFFECTS
Input Dynamics: Comp/Limiter/Gate
Patch memory effects: 3 types can be used simultaneously
50 patch memories
Guitar Lab supported
Can be assigned and used as an insert (input) or send effect
Dedicated send effects: 10 types of spatial effects

TUNER: Chromatic/Guitar/Bass/Open A/Open D/Open E/Open G/DADGAD

CLICK (METRONOME)
Time signatures: 3/4, 4/4, 6/8
Tempo range: 40.0 - 250.0 BPM

POWER
Batteries: 4 AA (alkaline, lithium, or rechargeable NiMH)
AC adapter: ZOOM AD-17 (5V/1.0A)

RHYTHM LOOPS
Sound source format: PCM
Number of loops: 150

SYNTH
Sound source format: FM
Polyphony: 8
Number of sound types: 18 (and a PCM drum kit)

DISPLAY: 2.4" (320×240) full-color touchscreen LCD

USB
CONNECTOR: USB Type-C
Note: Use a USB cable that supports data transfer. USB bus power is supported.

AUDIO INTERFACE FUNCTION:
2-in/2-out or 2-in/2-out (iPad): USB 2.0 Full Speed - 44.1 kHz, 16/24-bit
2-in/4-out: USB 2.0 High Speed - 44.1 kHz, 16/24-bit

MASS STORAGE FUNCTION
Device: USB 2.0 High Speed (5 V/200 mA power supplied when host)
GUITAR LAB CONNECTION: USB 1.1 Full Speed
DAW CONNECTION (CONTROL SURFACE): USB 1.1 Full Speed

MASS STORAGE FUNCTION
Host: USB 2.0 High Speed (5V/200 mA power supplied)

USB MIDI KEYBOARD CONNECTION: USB 1.1 Full Speed (5 V/200 mA power supplied)

ESTIMATED CONTINUOUS OPERATION TIME USING BATTERIES
During playback with +48V off and 32O headphone load
Alkaline batteries: about 5 hours
NiMH batteries (1900 mAh): about 5 hours
Lithium batteries: about 11 hours
* The above values are approximate. Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.

POWER CONSUMPTION: 5 W maximum
DIMENSIONS: 256 mm (W) × 158 mm (D) × 61 mm (H)
WEIGHT (including batteries): 827 g
NOTE: 0 DBU = 0.775 VRMS

Notes: Ideal for blues and crunchy rock sounds (or for that extra punch when soloing), the Nobels ODR-1 has been the first choice and secret weapon for many players and top studio guitarists for nearly 30 years. In fact, this top selling pedal has developed its own almost cult following since it was first designed and engineered in the eighties.

When the original circuit was developed, there seemed to be countless overdrives on the market that had what many people describe as a 'nasal' tone, but Nobels worked hard on creating a very 'open' sounding pedal that works with you and your amplifier. The result was the ODR-1, German engineering at its finest with stacks of resistors and capacitors forming very precise filters and signal shaping, giving you a pedal that responds to your dynamics and adds texture to your tone in a very natural, musical way - all while allowing the character of your guitar to be fully retained.

Step forward to 2020 with the latest model ODR-1BC.

With numerous requests from the pedal community and professional players worldwide, Nobels have added the option of an internal Bass Cut switch under the battery cover to help tame your low end if needed. In standard mode though, you still get the full frequency response of the original that is perfect for warming up single coils etc. In addition, the internal power circuitry has been increased to allow for 9-18 V capability to provide extra headroom, if your playing styles and tone goals require it. These new features haven't altered the fundamental tone and vibe, but have increased the versatility of the pedal massively for modern rigs.

With the drive control, the distortion can be easily adjusted from almost clean to maximum drive. The circuit also works very well with your guitar's volume control, so by backing off the volume you can clean up your tone. The tonal range is controlled by the Spectrum control tone pot with mid-click and fluorescent pointers on the Glow-in-the-Dark knobs. Turn the knob clockwise and it increases the bass and treble at the same time, while turning it counter clockwise has the opposite effect. The midrange stays untouched in either direction, to ensure a transparent yet warm tone wherever the Spectrum knob is placed.

Notes: The ODR-mini delivers creamy, natural overdrive - Everything from pushed clean amp tones to gain filled stacks! It has the same tones as its legendary brother - the ODR-1. You'll love the warm mid-gain tones for rock and blues, and the screaming hard rock sounds from the ODR-1 Mini. Plus the mini features true-bypass switching, the SPECTRUM pot with mid-click, fluorescent pointers on the "GitD" - knobs (Glow-in-the-Dark). Guaranteed to be a BIG part of your sound while a small part of your pedal board.

Electr. stab. power supply 9-18 Volt DC, with min. 100 mA, 2.1 mm plug, center negative, (optional)

Effect-Type: Overdrive
Analogue
Mono/Stereo: Mono In, Mono Out
Control: Drive, Tone, Level
Bypass Modus: True Bypass
9-18 Volt, center negative
Consumption 25 mA
Dimensions (BxLxH / mm): 42 x 93 x 50
Weight: 175 gr
Country of origin: China
Solid metal housing
Low current consumption
inkl. tape

Notes: *** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.


The Power of Sound

Introducing the Akai Professional MPC Key 61, the revolutionary new standalone production synthesizer keyboard powering the next chapter of the MPC legacy. Building on the history of powerful sequencing and revolutionary sampling, MPC Key 61 adds the most advanced next-generation virtual instruments and effects to MPC, adding to its arsenal of industry-leading music production tools. And now, with the addition of a 61-key semi-weighted keybed with aftertouch, the MPC experience ascends to an unprecedented level of creative interaction and expression, delivering the world's most powerful and complete standalone workflow.

Breaking Sound Barriers

Inside MPC Key 61, experience a new dimension of sound like never before. Powered by 25 plugin instrument engines at your fingertips, and with over 6000 cutting-edge presets, MPC Key 61 delivers the most modern-day sound pallet ever programmed in a production synthesizer. Each plugin instrument features advanced synthesis, deep parameter editing, and modern effects developed for a truly inspiring musical experience-all designed with a fast and vibrant touch interface for an intuitive and compelling workflow. Immerse yourself in a world of sound.

Keys to Expression

The MPC Key 61 features an incredibly expressive and playable semi-weighted keybed with aftertouch to drive its world-class sounds with dynamic responsive control. With players and producers in mind, technology and artisanship were combined to breathe inspiration into every performance. The MPC Key 61's keybed is designed to deliver the highest performance experience possible connecting the dots between sound and feel. The 16-velocity sensitive RGB pads on MPC Key 61 are the same award-winning pads as the MPC One. In addition to the iconic MPC pads are the renowned Time Correct, Swing, and Quantize features of MPC that continue to endure as mainstays of modern music production.

Plugin to a World of Effects

MPC Key 61 includes over 100 state-of-the-art effects ready to load across your music productions for mixing and mastering. Insert lush and spacious Reverb & Delay effects to your tracks, add bounce and punch to your drums and mix using modern or vintage style compressors and limiters. Experience plugin FX like never before only inside MPC Key 61. MPC Key 61 is the world's first production synthesizer incorporating modern day vocal FX plugins which can also be used for the most creative sound design.

Touch Strip and Hands-on Control

The onboard assignable Touch Strip Controller is a catalyst for new ways to control, create and interact with your own signature sounds. Dedicated Pitch Bend and Modulation Wheels mean an added touch of expression to elevate your compositions. Bend the notes of your synth and lead sounds in Fabric XL, add gentle vibrato to your stringed instruments in Session Strings, or dial in the speed of the Organ's rotary Leslie cabinet and hear your parts swell with a wide chorused tremolo.

Specifications

Keys: 61 semi-weighted, full-size keys with aftertouch

Pads: (16) velocity- and pressure-sensitive pads, RGB-backlit, (8) banks accessible via Pad Bank buttons

Knobs + Performance Controls: (4) 360- touch-sensitive Q-Link knobs for parameter adjustment, (1) Touch Strip multi-function 5.5" (140 mm) touch-capacitive controller with LED indicators 360- encoder for display navigation and selection via push, (2) Pitch Bend and Mod Wheel, (3) 270- knobs for gain, mix & level adjustment

Buttons: (44) dedicated-function buttons

Display: 6.9" / 176 mm (diagonal), 5.9" x 3.7" / 150 x 93 mm (width x height), Full-colour LED-backlit display with touch interface

Memory: RAM 4 GB, Storage 32 GB (user storage, 13 GB pre-installed content), 4 GB (MPC operating system), 15+ GB free-space for user storage expandable via SATA connections

Power: Via IEC (Included), Auto Switching Internal Power Supply (100-240v)

Connections: (2) XLR+1/4" (6.35 mm) TRS inputs (Input 1/2) (w/ XLR Mic Preamps), (4) 1/4" (6.35 mm) TRS outputs (2 stereo pairs), 1/4" (6.35 mm) stereo headphone output, (1) 5-pin MIDI input, (1) 5-pin MIDI output, (1) 5-pin MIDI thru, (8) 1/8" (3.5 mm) CV/Gate outputs, Ethernet Network port, USB Type-A ports, (1) USB Type-B port

Other Controls: (2) Line | Instrument switches +48v Phantom Power switch 1/4" (6.35 mm) TRS Footswitch jacks (Sustain + FS2) (Variable and switch compatible) 1/4" (6.35 mm) TRS Expression Pedal input

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: For Eons, man has thought the sound of thunder to be from the heavens above, echoing boastfully over us as we stay safe from its greatness. However, legend tells of a stoic and indomitable beast residing in the highest mountains seen and heard only by the most brash of travelers. With gnarled and twisted horns, this creature emits a sound thicker than Earth's crust to command attention and warn all who stand in his way. This is Eons.

Eons is a five-state fuzz capable of massively thick sounds ready to test the limits of any amp's grill cloth. Use the Voltage (lightning bolt) knob to crank up to 18 volts into the pedal's circuit for massive, open fuzz sounds, or choose to starve it down to 3 volts for spatty, gated fuzz. Experiment with the Voltage and Mode knobs for nearly endless styles of fuzz tones. Find vintage-inspired sounds emanating from the stages of Woodstock to chaotic three-chord punk rock. Eons is ready for a fight.

The Eons features a five-position rotary knob that offers the following clipping configurations. Think of them as different "flavors" of the pedal:
I. Silicon soft clipping traditional fuzz that's well rounded with a huge sound; compressed and smooth.
II. Silicon clipping with an added bass boost that boosts the low end at the beginning of the circuit; compressed and crunchy.III. Germanium soft clipping with a feel of "what if a distortion and fuzz had a kid?"; crunchy and dynamic.
IV. LED clipping diodes with a slight high-end cut; dynamically dark.
V. Hard clipping silicon transistors combined with LED and Silicon soft clipping diodes. The rowdiest of the modes with tons of gain: compressed, loud, and angry.

Specs

The Eons comes in a sandy tan enclosure color with red, cream and black ink. Artwork features a stoic four horned, Markhor goat illustrated by Adam Forster.
9V DC, center negative, 100mA min
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended. Power supply not included.

Notes: The all-new GEM-05USB mixer makes audio routing easy. Equipped with Bluetooth streaming, USB playback, customizable sound, and a 5-input 2-bus mixer. The GEM-05USB brings state-of-the-art professional-quality audio on the go, giving you all the controls you need. This mixer fuses a user-friendly interface with premium sound. Bluetooth streaming for playback from any compatible device. State of the art mic preamp with phantom power plus 2 Band EQ with dedicated volume control. Customize your sound with dedicated delay FX control. Headphone out with dedicated volume control.

Notes: The all-new GEM-08USB mixer makes audio routing easy. Equipped with Bluetooth streaming, USB playback, customizable sound, and a 8-input 2-bus mixer. The GEM-08USB brings state-of-the-art professional-quality audio on the go. Giving you all the controls you need. This mixer fuses a user-friendly interface with premium sound. Bluetooth streaming for playback from any compatible device. State of the art mic preamps with phantom power & 3 Band EQ with dedicated volume control. Customize your sound with dedicated delay FX control. Headphone out with dedicated volume control.

Notes: Still one of the best value pad controllers on the market, Akai's trusty LPD8 offers eight MPC-style pads and eight rotary controls. Simple, effective and compatible with most hardware and software.

Supplier's Notes:
Premium pad performance

Great things come in small packages and the the LPD8 delivers in a big way. The sleek MIDI pad controller features 8 velocity-sensitive RGB pads from the flagship MPC X and is up to any pad performance-based duties for the modern beat-making music producer. Produce beats, trigger one-shot samples and loops, or connect to any general MIDI-based DAW for easy hands-on controlling and creation.

Legendary pad performance

LPD8 features the same pads from the top-of-the-line MPC X standalone hardware. The sturdy yet super responsive pads are the standard for any music maker looking for dynamic performance without compromising creativity.

Assignable knob controls

LPD8 features 8 assignable rotary knobs for precise control of parameters and values in your DAW. Adjust reverb or delay wetness, dial in parametric eq, trim loops and samples, and so much more with the accuracy you need for your music creation workflow.

Sleek compact design

LPD8 fits in wherever you need it. Sit it on your desk, neatly against your laptop computer for a streamlined process, or pack it into your producer bag with your headphones and accessories ensuring you're always ready to create anywhere.

MPC plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Controls:

(8) velocity-sensitive, RGB-lit pads
(8) 270- knobs
(4) UI buttons

Programs: 4 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 12.1" x 3.2" x 1.3" / 306 x 81 x 34 mm
Weight: 0.86 lbs./0.39 kg

Notes: Updated version of Akai's much-loved mini keyboard controller. Second-generation model gets a visual makeover plus updated keybed for improved playability. Superb value.

Supplier notes:
Mini keys, major performance

The LPK25 is the perfect companion for piano and keyboard-playing musicians everywhere. When inspiration calls, this sleek 2-octave MIDI controller makes for easy composing and creating in even the tightest spaces while still delivering an incredibly responsive experience.

A real controller for a real creation

LPK25 features the revolutionary Gen 2 Dynamic keybed which premiered on the legendary MPK mini mk3 MIDI controller. The keys offer an exquisite playing experience with careful attention to velocity response. Whether you're playing a gentle upright piano, a super synthesizer plugin, or triggering notation into your favourite composition software, LPK25 becomes a natural extension of your creativity, ensuring you won't miss a beat.

Built-in clock and arpeggiator

The onboard arpeggiator and clock make for powerful control of any destination, whether software instrument, hardware device, or USB enabled modular gear, all via a single USB cable.

Compact production partner

When not in use, LPK25 stores away quickly and neatly until your next creative session. Pack it in your everyday carry bag and keep it handy for use with your laptop, smart phone, or tablet.

MPC Plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Keyboard
25 keys, velocity-sensitive
10-octave range (127 MIDI notes)

Arpeggiator
Range: 1-4 octaves
Modes: Up, Down, Exclusive, Inclusive, Order, Random, or Latching
Time Divisions: 1/4-note, 1/4-note triplet, 1/8-note, 1/8-note triplet, 1/16-note, 1/16-note triplet, 1/32-note, or 1/32-note triplet
Tempo: 30-240 BPM via Tap Tempo button (internal sync). Based on software tempo (external sync)
Swing: 50%, 55%, 59%, 61%, or 64%
Programs: 8 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 13.7" x 4.0" x 1.5" / 348 x 102 x 38mm
Weight: 0.99 lbs. / 0.45 kg

Notes: Taking equal inspiration from gritty delays on cheap mixers, the sounds of dub and the fracturing of consciousness in time and space, the Coma Reactor looks like a deceptively simple delay module... till you start digging deeper.

The Coma Reactor boasts the crunchy sounds of the PT2399 chip, but adds a number of useful routing possibilities that really open it up for sound mangling that transcends the norm.

Independent volume controls for dry, wet as well as FX loop return allow you to blend in clean, delayed and affected sounds to suit your needs. A CV input on the module increases or decreases the delay time, going from slight tape-echo warbles to some truly seasick pitch shifting. A buffered clean through allows you to pass an unaffected unity gain to a mixer or other device.

The Send/Return path allows you to process your delay signal through another effects unit. Without anything plugged in, a truly nasty bandpass filter lurks in the delay feedback path. The 2022 edition of Coma Reactor features Frequency (CV controllable) and Resonance knobs for this filter.

Lastly, this completely delirious module is also capable of generating noises and oscillating with no input attached, making it a useful soundtrack generator for the end of the world.

The 2022 Coma Reactor includes a breakout header for future integration with upcoming AFA expander modules.

Power consumption: 39mA at +12 V and 21mA at -12 V
Depth: 22mm
HP : 12

Notes: Part performance mixer, part utility module, with 4 channels of VCA, summed to a stereo output, Tannhauser Gates is AFA's first stereo module.

Based loosely on the Buchla 100 series Gates, each channel boasts a discrete VCA with a rich overdrive sound, stereo panning, a tilt EQ and an easily accessible mute switch. Each channel can be used individually as a mono track or all four can be summed down to the stereo output. The four channels have an individual CV input, or they can all be controlled via the master CV input. The Tannhauser Gates also hosts the capability for a stereo send and return path, expanding your sonic arsenal to other processing modules.

Tannhauser Gates is designed with future expansion in mind. Adding up to three more Tannhauser Gates modules, it is possible to build a performance mixer system of up to 16 channels, all summed to a single output module. The back side of the module is equipped with a number of expansion headers.

Power consumption: 146mA at +12 V and 94mA at -12 V
Depth: 34mm
HP : 20

Notes: The ultimate Eurorack case.

At home, stage or into the studio, the Befaco 7U Case brings your system to the next level.

Power to the people

Equipped with Befaco's latest and most sophisticated power supply (Trolley Bus), the Befaco 7U Case supplies up to 5000mA of power. Ready to feed the most modern and power-hungry modules.

Connected to the world

The Befaco 7U Case rear panel count with a vast array of connections to pair your system with external devices. Each connector follows the Intellijel format, making them fully compatible with Intellijel's 1U modules.

Build to last

Designed with a high-quality Unibody Black Anodised Aluminum frame, the Befaco 7U Case is a slim and sturdy solution to travel with. The included PET-G clear cover keeps your modules safe even patched.

Designed to fit any situation, the Befaco 7U Case metal frame is a lightweight and strong device by itself. With a maximum depth of 53mm (power supply side) and 70mm (rest of the case), it can house the vast majority of modules out there. Equipped with a high-quality anti-vandalic power button and a Kensington lock connector, the Befaco 7U Case is also a safe device to travel with.

Because power is important for us, this new Trolley Bus systems drop up to 5000mA on the +12V rail, 2500mA on -12V, and 4000mA on +5V with high voltage stability under load and low noise. The case drives up to 36 modules over its 208HP (3U) and 104HP (1U) rows (Intellijel format).

6x 6,3" Jacks I/Os with Balanced and Unbalanced configuration, MIDI In/Out/Thru ports, USB Device Type B, and Apple compatible USB-A charging ports. The Befaco 7U Case offers a huge amount of connections fully accessible from its internal I/O Board.

Created with compatibility in mind, the rear panel ports are fully compatible with Intellijel 1U modules. The 1U row can be easily customized to be at the centre of the case with just two screws.

To keep your modules safe and dust free, a custom PET-G clear cover is included with the case. The cover has been designed to close patched, and a custom velcro belt is included to keep it safely closed.

To save space in your studio desk, the Befaco 7U Case is also Vesa mount fully compatible. It counts with Vesa threads at the bottom to easily attach it to desktop or wall Vesa stands.

Technical Specifications

External Dimensions (without cover): 53.5cms x 31cms x 8cms
External Dimensions (with cover): 53.5cms x 31cms x 14cms
Internal Row Dimensions: 2x 3U 104HP and 1x 1U 104HP (Intellijel format)
Power supply Specifications: +12V: 5000mA, -12V: 2500mA, 5V: 4000mA
Module Depth: 53mm (power supply side), 70mm (rest of the case)
Module Slots: 36
Weight (without cover): 2.6kg
Weight (with cover): 3.4kg
Rear connectors: 6x 6'3" Jack I/O (Balanced or Unbalanced), MIDI DIN In/Out/Thru, USB Device Type B, Apple compatible USB-A charging ports.
Power brick: 120W 2.5mm Barrel connector centre positive (included)
Cover: PET-G Clear cover (included)
Finish: Black Anodised Aluminum
Vesa 100 format threads. Recommended Vesa stand: >12kg
Kensington Lock

Notes: Pan and cross fade up to three signals with AJH's versatile Triple Cross. Four different modes allow you to set up the three channels in numerous ways, for both audio and CV processing.

Supplier's Notes:
The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative

Notes: The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative

Notes: Designed to be a highly customizable connection matrix, 3DVCA packs a boat load of utility into a small 6HP package. Four VCAs share the three macro controls: X, Y, and Z. As a group, they shape incoming and outgoing signals and emulate the coordinates of a point in 3 dimensional space. This allow the VCAs to work together in a mono, stereo, or quad configuration and accomplish a variety of mixing, crossfading, and panning functions.

3DVCA is designed to be used in the following functions:

Quad monophonic crossfader
Dual stereo crossfader
Stereo balancer
Stereo VCA
Mono to stereo panner
Unity mixer with up to eight inputs
Quadraphonic panner

Each output has a dedicated SUM input which allows an external signal to be automatically mixed into the output signal. This allows 3DVCA to daisy chain both with other mixers and other 3DVCAs. For example, you can create a full mono, stereo, or quadraphonic mix by plugging the output of each 3DVCA into the sum inputs of the next 3DVCA in the chain. Using this method, a set of 3DVCAs can create a fully voltage controlled and decentralized mixer which ties together anything from a small skiff to a monster synth.

When 3DVCA works as a crossfader or panner, the X and Y parameters follow an equal-power curve that keep output signals at the same volume no matter how many inputs are mixed together. This is in contrast to the Z parameter which follows a linear curve to always behave predictably with external modulation sources. All inputs are fully DC coupled in order to work with modulation speed signals as well as static DC voltage sequences; this means that 3DVCA can handle any sort of signal that you throw at it. All op amps in the device employ rail-to-rail inputs and outputs to enable the largest headroom when mixing many different signals together.

Whether you need to maximize your mixing functionality in the smallest possible footprint or have the most control over every aspect of your system, 3DVCA provides a ton of functionality in any system. Enter a higher dimension of sound with the Mystic Circuits 3DVCA.

Dimensions
6 HP
30 mm deep

Current Draw
45 mA +12V
45 mA -12V

Notes: Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: Designed to integrate sound sources from outside Eurorack, Verbos's Real World Interface offers three channels including built-in microphones, preamps, envelope followers and a frequency detector.

Supplier's Notes:
The Real World Interface is a 3-channel external processing module intended for connecting with sound sources outside the system. The channels are oriented as vertical channel strips. The left and right channels have a built-in condenser microphone, preamp, envelope follower with variable decay and gate extractor. In addition to a preamp, envelope follower and gate extractor, the centre channel also has an Automatic Gain Control (fixed high ratio compressor), fundamental extractor (tracking lowpass filter), frequency detector and locked oscillator. Internal microphones are useful for introducing electro acoustic room sounds into the modular. Envelope followers can be used to have external signal levels effect parameters such as filter cutoff or level for building dynamics processors. Gate extraction allows external sounds such as metronomes, clicks, claps or room sounds to advance sequencers, trigger sounds or initiate other events. The Frequency Detector can extract the pitch of simple monophonic sounds but is also a semi chaotic CV source in the tradition of such modules since their introduction in the 1960's. The Locked Oscillator plays a sine wave at the same pitch as the input signal.

Size: 18HP

Notes: Immerse yourself and go beyond the boundaries of what is possible with a conventional guitar or synth pedal. GHOST PEDAL brings you new possibilities of tone shaping with its state of the art flexible audio routing chain, allowing you to jump between dimensions with a single press of a button.

From earth shaking subharmonics and distorted drones to angelic shimmer reverbs and anything in between, GHOST is a PEDAL for the adventurous sound designers and the most demanding guitar and synth players. Intuitive UI coupled with hands-on control and preset storage allows you to stay in the now and focus on your performance.

Unique user interface showing parameter values and real-time modulations

Line or high-impedance JFET guitar inputs with cabinet simulator

Full MIDI control over every parameter incl. MIDI clock over LFO and delay

True relay stereo, buffered and trails bypass modes

Bipolar LFO and expression pedal assignments to any parameter

3 reverb and 3 filter types, incl. comb with resonator, six possible routing variations

Reverb freeze, delay looper, spring reverb with virtual spring excite

Three footswitches let you change assignable parameters (tap tempo/freeze/spring excite), select presets and bypass with your feet

Notes: Warp is a novel synth engine that combines the best of additive and wavetable synthesis.

In the center of Warp's control panel is a colorful XY LED matrix that represents the sound space from which Warp draws its sounds. This XY sound space consists of 32x16 frequency spectra. Each of Warp's four voices can move freely and independently across the XY space. It always uses the surrounding frequency spectra to calculate a wavetable based on 512 sine waves in real time using additive synthesis. By changing the position, wicked wavetable sounds are possible, playable with four voices and eight oscillators and navigable in two directions. An intuitive integrated editor allows playful modeling of your own frequency spectra.
With Warp's SPEC effects the frequency spectrum can be filtered and deformed in realtime before a wavetable is calculated. The wavetable can then be modified with WARP effects like wavefolder, PWM bend, overdrive and redux. The resulting wavetable serves as source for two oscillators per voice, which can be detuned and also synchronized to each other. Each voice is followed by a 12/24dB/octave high pass and low pass filter.

Warp offers an integrated editor, with which you can playfully draw and modify your own frequency spectra. The XY-Sound Space is seen as a canvas on which you can draw your own frequency peaks. Several drawing algorithms are available as tools to edit single or a group of harmonics in a musically meaningful way. There is also the possibility to derive frequency spectra from audio samples from the SD card or to put whole wavetable audio files into the XY sound space. Likewise, the XY sound space can be exported to the SD card as a wavetable audio file of any length and bit depth, so Warp can also be used as an intuitive wavetable generator for other synthesizers.

Also on board are two internal ADSR envelopes and two LFOs, which can be routed to a variety of internal destinations using a modulation matrix. To keep the overview, all modulations are color-coded and are additionally visualized by pulsating LEDs in the modulation matrix view.

Navigation through the menu is as intuitive as with our QUASAR module and is simply done via a push-encoder and a back button. The display always shows which function the four surrounding aluminum encoders currently have, and colored LEDs next to the encoders provide visual assistance. Likewise, the tuning of the module is done via a detented encoder, which adjusts the pitch either in fine steps, in semitones or in octaves. An octave switch is thus already integrated.

For all its feature-richness, Warp still remains a playable and performance-oriented instrument. The large potentiometers serve as macro controls to control several parameters under the hood at once. This keeps the instrument straight forward with a manageable number of controls, but they are all very expressive.
Likewise, the module offers the ability to save and load presets and also comes with audio files and presets on board. Thus, Warp is ideally suited for both detail-oriented sound design and hands-on performance.

In the standalone version, Warp is a monophonic four-voice synth voice that can also be used as an oscillator. With an expander module, it will also be possible to play Warp four-voice polyphonic via MIDI and CV/Gate in the future.

Warp uses a novel hybrid engine that combines the best of additive and wavetable synthesis. With the integrated editor you can playfully draw your own frequency spectra like on a canvas into the colorful XY sound palette. Warp is a feature-rich powerhouse that lets you create all kinds of sounds, from glassy clean to crunchy crunch. Thanks to expressive macro tone controls, extreme morphs are possible in a single pot turn.



Main functions
4 Voices & 2 oscillators using a hybrid additive-wavetable synth engine
Big knobs act as macro controls for underlying parameters and enable expressive Hands-On playability
Polyphonic with expander, monophonic as standalone unit
Usable as a full synth voice or as an oscillator module
Additive synthesis with 512 sine waves per oscillator = 4096 sine waves in total
XY sound space as a collection of 32x16 frequency spectra
Each voice travels independently across the XY space and uses the underlying spectra to synthesize a wavetable in real-time
Spectral FX are applied on the spectrum before a wavetable is generated
Wavetable FX are applied once the wavetable is generated, e.g. Wavefolder, PWM-Bend, Redux, Overdrive
Two Post-Filters per voice: 12/24dB Lowpass and Highpass with resonance control
Independent oscillator settings per voice, e.g. volume, pitch, stereo pan, detune, sync, X/Y position
Integrated modulation by 2x ADSR, 2x LFO with many waveforms
Modulation matrix view to see everything that is going on at once
Integrated editor for playful drawing of own frequency spectra
Algorithms for musically meaningful drawing of harmonics

Width: 24 HP
Depth: 30 mm
Current draw +12V: 205mA
Current draw -12V: 20 mA
Current draw +5V: 0 mA

** Includes 3mm screws, 16-Pin to 10-Pin eurorack power cable, USB cable for firmware updates **

Warp uses a novel hybrid engine that combines the best of additive and wavetable synthesis. With the integrated editor you can playfully draw your own frequency spectra like on a canvas into the colorful XY sound palette. Warp is a feature-rich powerhouse that lets you create all kinds of sounds, from glassy clean to crunchy crunch. Thanks to expressive macro tone controls, extreme morphs are possible in a single pot turn.

Notes: Module A-147-4 is a dual voltage controlled LFO (Low Frequency Oscillator). Each LFO has the five waveforms triangle, sine, rising and falling sawtooth, as well as rectangle available. The rectangle output features manually adjustable pulsewidth and pulsewidth modulation by means of an external control voltage. The core waveform is triangle. The other waveforms are derived from triangle by means of waveform converters. The frequency of each LFO can be adjusted manually and modulated by means of an external control voltage with associated attenuator and polarity switch. By means of a jumper the basic frequency range of each LFO can selected: about 0.02 Hz (~ 50 seconds) ... 2.5kHz or about 0.0017 Hz(~ 600 seconds) ... 220Hz. That way each LFO can be used also as a VCO with a max. frequency of about 2.5kHz. Each LFO features a reset input which can be used to reset the triangle signal.

The module has these controls and in/outputs available:

Control F : manual control of the frequency, for each LFO the frequency range can be selected by means of a jumper from two values (see technical notes)

frequency coverage of control F in the high frequency range: about 0.075 Hz (~ 13 seconds) ... 1,4kHz

frequency coverage of control F in the low frequency range: about 0.007 Hz (~ 140 seconds) ... 125Hz

Control CV: attenuator for the signal applied to the CV socket, by means of a jumper a small positive voltage can be applied to the switching contact of the /CV/ socket, as long as no patch cable is connected to /CV/ socket the CV control then works as fine control for the frequency

Switch CV Pol.: polarity switch for the signal applied to the socket /CV/

Control PW/PM: combined control for manual and CV control of the rectangle pulsewidth:

when no patch cable is connected to socket /P/ the control is used to adjust the pulsewidth (PW) manually

when a patch cable is connected to socket /P/ the control works as attenuator for the external CV signal with a basic pulsewidth of 50:50.

Socket /CV/: frequency control voltage input, in the factory the module is adjusted so that the sensitivity of this input is exactly 1V/octave when the CV control is fully CW.

Socket /R/: reset input, according to the associated jumper the reset input is edge triggered or level controlled (see technical notes for details)

Socket /P/: pulsewidth control voltage input

Sockets with waveform symbol: output of the waveform in question (triangle, sine, rising and falling sawtooth, rectangle)

The output voltage ranges are about -5V ... +5V (10Vpp), except the rectangle output

For the rectangle output one can choose by means of a jumper if the range is about -5V ... +5V or 0...+10V.

LED: visual control of the LFO (triangle)

The inputs of the module are labelled with white characters on black background (in the text included into two slashes). The outputs are labelled with black characters.
Technical notes and special features:

The basic frequency range of each LFO can be selected by means of a jumper. The settings correspond to two different capacitor values for the VCO circuit. The relation between the two ranges is about 1:11. When the upper range is selected frequencies from about 0.02 Hz up to 2.5kHz can be generated. For the lower range the values are about 0.0017 Hz ... 220Hz. To obtain these full frequency ranges external control voltages are required. With the frequency control F only the frequencies mentioned above are possible.

Apart from that the range for the manual control F can be reduced to obtain a finer resolutuion. For this a jumper has to be removed. The range of control F is then reduced to about 1:4.5 only.

In the factory the starting voltage of the triangle output after a reset is adjusted to 0V, i.e. the triangle starts from 0V with the rising slope after a reset. By means of a trimming potentiometer the starting voltage can be adjusted to another value (e.g. to -5V).

Another jumper is used to set the reset behaviour to edge triggered or level controlled. When set to edge triggered the rising edge of reset signal is used for the reset (independent of the duration of the "high" state of the reset signal). When set to level controlled the triangle output remains at the starting voltage as long as the reset signal is "high". Only when the reset signal turns "low" the triangle starts.

Dimensions
8 HP
45 mm deep

Current Draw
80 mA +12V
70 mA -12V

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: Unique digital instrument based on bitmask synthesis and resonant filters. Raw and distinctive tones, with notes interacting in unorthodox ways.

Supplier's Notes:
Expressive & Characterful

The Kodamo MASK1 is a musical instrument focused on the interaction between the player and the keyboard. With its exclusive Bitmask engine combined with resonant filters, the MASK1 makes raw, gritty and ethereal sounds that respond in incredible ways to your playing style.

It's not just the notes

Most synths just play the notes you press. Kodamo went a bit further, by looking at how the notes interact with each other. Only by playing the keyboard, you can control when the attacks are triggered, how notes are tied or separated from each other, or if they should keep resonating or stop each other like if they were played on the same string on a stringed instrument. You will discover new ways of playing the keyboard.

Built with love

The MASK1 uses a high quality, 5-octave Fatar keyboard with velocity and aftertouch. It's fully made of painted metal, with two ALPS knobs and 23 KAILH mechanical switches. Everything is assembled in France with high attention to detail. A lot of time was spent on selecting parts and suppliers to balance price and work ethics, while always aiming for the highest quality.

For live and studio players

With its compact size and light weight, the MASK1 will easily fit in your studio and is ideal for gigs. It remembers settings between sessions. With its unique sound, premium keyboard and MIDI connectivity, it can become the main keyboard of your setup.

Explore the sounds

The MASK1 invites you into a zen and relaxed sound exploration. Press a button, turn the knob and listen how the sound changes. The MASK1 is designed to have very few parameters, but well-thought ones. The Bitmask synthesis engine makes rich and warm sounds ranging from classic analogue tones to voice-like formants, glitchy 8-bit noises and ethereal pads. Sounds are fully editable and can be stored in one of the 400 user memory slots. They can be transferred to your computer and shared with other people.

What is Bitmask synthesis?

Bitmask synthesis is the method the MASK1 uses to generate its sound. Internally, oscillators do only have one waveform. Various tones are created by applying what is called a bitmask. This is a technique inherited from computing, which alters a number by masking some of its digits. Here, this technique was adapted to make sound. Bit-masking creates complex wave shapes that are full of harmonics and give the MASK1 its sonic character.

Specifications

Synthesis type: Bitmask, subtractive
Polyphony: 10 voices with optimized allocation
Multitimbrality: 4 parts (5 in layered/split mode)
Oscillators: 2 bitmask per voice with 256 masks each, transpose and detune
Noise: 1 per voice with programmable sample-and-hold frequency
Filter: 1 per voice, two poles (12dB/oct) state variable, self-resonant with pitch tracking and 4 modes (low, high, band pass, notch)
Envelopes: 4 loopable ADSR per voice (osc1, osc2, noise, filter), 3 delta-decay (osc1 mask, osc2 mask, pitch)
LFO: 2 per part with 7 waveforms and noise, delay, decay and 16 destinations
Arpeggiator: 26 patterns with adaptive or fixed chords, latchable, retrig or pitch change modes. Arp do send note events to MIDI out.
Looper: Up to 10000 events, unlimited duration, single track. Records notes, pitch bend, mod wheel, aftertouch and sustain pedal.
Effects: Two stereo effects in series. First effect: chorus, phaser, distortion, bitcrusher, tremolo and ring mod (64 types). Second effect: delay, comb filter, reverb, room simulations and distortion (48 types)
Modulations: Velocity (6 destinations), modulation wheel (16 destinations), aftertouch (16 destinations), LFO1 and LFO2 (16 destinations each)
Play modes: Polyphonic, monophonic, slurred, mono portamento on legato, paraphonic, hybrid poly-mono on legato, slurred paraphonic, mono retrigger, poly retrigger
Split: Configurable split point, balance between voices, transpose, panning and tuning
Layer: Configurable balance between voices, transpose, panning and tuning
Misc: Voice pan spread, polyphonic portamento, keyboard envelope rate scaling
Memory: 120 factory presets, 400 user voices. EEPROM-based (no battery required)
Audio outputs: 2 balanced 1/4" TRS jack, pro audio level with +/-12V internal power supply, 1/4" jack headphones
MIDI: 2 DIN (in, out), class-compliant USB type B, SysEx voice transmit/receive, CC-mapped voice parameters
Keyboard: 61 full-size keys, weighted Fatar action with 6 velocity curves and 6 aftertouch curves
Controls: 23 buttons, 2 rotary encoders, pitch bend wheel, modulation wheel
Display: 4-digit red display
Pedal input: Sustain, 1/4" TS jack, adaptive polarity
Tuning: 400-470Hz. 6 temperaments including arabic tuning.
Size: 89 x 26 x 8cm including knobs and feet.
Weight: 7.5kg
Power: External 12V DC adapter, AC 100-240V in
Chassis: Powder-coated, screenprinted steel. Light grey (RAL 9002) colour
Sides: Black ABS

Notes: Combining the power of multi-oscillator wavetable synthesis with the percussive detail of sampled sounds, Pianophonic is a powerful hybrid synth engine featuring 8 voices of polyphony. Not limited to Piano sounds, the voice architecture of Pianophonic is extremely versatile and easy to use with the essential controls laid bare on the front panel, and the most significant CV inputs and outputs provided for full integration within eurorack patches.

Taking its inspiration from the wavetable/sampler keyboards of the 90s, Pianophonic revisits a lean and mean approach to digital sound creation but instead with 24bit 48Khz quality and fingertip control of the parameters that really matter.

With a built in SD card and an online re-synthesise utility, allowing users to create their own sound banks, the possibilities for sound exploration are limitless.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.