All genres charts

Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!

Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.

These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.

Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")

Notes: Break out MIDI signals into a 3.5mm stereo jack.

- Tip = Pin 4 (Source)
- Ring = Pin 5 (Sink)
- Sleeve = Pin 2 (Shield)

Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.

Both ends of the cable have a right-angle plug.

Notes: 3,5mm TRS to male DIN 5

150cm length

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: RackBrute 6U

Armoured Eurorack carrier

RackBrute 6U is an all-inclusive Eurorack case ensuring the total security of your modules and maximum practicality in all conditions of use. Its multi-position configuration and included dependable power supply make it the true specialist solution.

Artists may have a bodyguard; modules deserve armour-plating.

RackBrute 6U provides you with 176HP to store and secure your enviable collection of Eurorack modules in an everlasting yet lightweight aluminium chassis flanked by two wood panels. Once you're locked and loaded, your modular setup will look and feel like a monolith, yet more flexible than ever thanks the Link fastening system and the paired handle. When on the move, it will make the transport of your modular equipment a walk in the park. When in position, it will let you organize your command centre the way you want it. Modules don't live on love alone, and RackBrute 6U keeps everything alive with its +12V / -12V / +5V power supply.

When you have to hold your position for hours, it's better to be well set up and to have a clear view of the surroundings. For this reason, we developed the Link system, a convenient and simple-to-use fastening system that allows you to orientate the dedicated handle so that you can give your modular the most tactically advantageous position. Whether prone, crouching, or standing to attention, RackBrute 6U will always be on the lookout, ready for orders.

Troops are nothing if they are not properly fed. No problem, RackBrute 6U is not just a box. It includes a formidable +12V / -12V / +5V power supply ensuring your firepower up to 1600mA. This is coupled with a military-grade power rail with 32 available slots, including advanced noise filtering technology that guarantees optimum conditions.

With RackBrute 6U, even the most headstrong modules fall into line.

Uniting your forces under the same banner
May all modular units meet at the rallying point and be ready for further orders!

The RackBrute 6U fully takes advantage of the Link System, and it's not alone. You'll also find the Arturia Link on the more compact RackBrute 3U, as well as the self-contained MiniBrute 2 and MiniBrute 2S synthesizers. What solution will you go for? Will your field of operations be fully based on Eurorack, or the powerful force of analogue monosynth flagship supported by a fleet of complementary modules?

This technology is the brainchild of our secret research department, but we wanted it to be patent-free so that all our allies could adopt and benefit from it. The modular music battleground is likely to get crowded with an ever-growing variety of Link-enhanced system.

You are not alone on this mission. You have your trustworthy equipment to keep you company.

Equipment checking!

All present and correct, ready for inspection. We trust you'll find everything to your liking.

Go, go, go!

Don't worry, RackBrute 6U will keep mishaps at bay.

The success of your operation depends on your sensitive material arriving in perfect working order. RackBrute 6U is up to the challenge. The handle, the chassis, the threaded nut strips, each of its strategic components is made aluminium or steel. RackBrute will carry your setup no matter the context, not matter the weight, the distance and the destination. The built-in spacers will also make sure that no collisions occur when transporting two RackBrute units or a RackBrute and MiniBrute 2. Maybe you also want to keep your modular away from prying eyes. Then, trust the optional RackBrute Travel Case for more covert missions.

RackBrute 6U is the complete transport solution for when you need to take your show on the road.

What's in the box:

Box content
RackBrute 6U unit
Power cord

Instrument dimensions
Size : 19 x 13.2 x 3.3 inches (484 x 300 x 83mm)
Weight: 8.3 lbs. (3.76 Kg)

Main Features

Eurorack format, 176 HP
Aluminium Chassis
Provided with a 5 HP power module
Up to 1600mA on +12V and 1600mA on -12V (4 separate circuits of 800mA)
Up to 900mA on 5V
Power rail with
Noise filtering
32 standard power slots
20-slot zone with up to 800mA on +12V and -12V
12-slot zone with up to 800mA on +12V and -12V
Link system and smart handle to fasten a MiniBrute 2/2S or another RackBrute unit in various configurations
Built-in Spacers for the highest protection in transport configuration

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Blank panel, 2HP, constructed from anodised aluminium, silver.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz

Notes: This pack of 6 guitar audio patch leads from Chord is designed for connecting effects processors, sound modules, pedals etc. in coloured insulation. They are terminated at each end with a right angled 6.3mm jack plug.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: 4ms blank panel - 1HP width. Black coloured PCB material with 4ms logo.

Notes: Blank panel, 1HP, constructed from anodised aluminium, silver.

Notes: 4ms blank panel - 2HP width. Black coloured PCB material with 4ms logo.

Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.

uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.

The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.

Notes: Blank panel, 8HP, constructed from anodised aluminium, silver.

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: With Mantis, Tiptop took their years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis is beautiful and the color contrast between legs and body gives it its identity. Legs are offered in 4 different colors so anyone can find the right look.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

***UPDATE - MAY 2021 ***
As of May 2021, all Mantis cases shipped have a small update to the design. The connector for SyncBus is no longer included. This connector was never used as Tiptop didn't develop the cable for it, and the connector is no longer in production by the manufacturer so it was removed. The Mantis still has the same power supply and functions as before.

Notes: With Mantis, Tiptop took their years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis is beautiful and the color contrast between legs and body gives it its identity. Legs are offered in 4 different colors so anyone can find the right look.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

***UPDATE - MAY 2021 ***
As of May 2021, all Mantis cases shipped have a small update to the design. The connector for SyncBus is no longer included. This connector was never used as Tiptop didn't develop the cable for it, and the connector is no longer in production by the manufacturer so it was removed. The Mantis still has the same power supply and functions as before.

Notes: Blank panel, 4HP, constructed from anodised aluminium, silver.

Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.

Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 15cm (Pack of 5)
- Colour: Yellow

Notes: In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our Rene and Pressure Points touch controllers.

Today the Make Noise Skiff provides a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is: the patch the artist has created. At one side there is a power button and the Make Noise logo is illuminated to show the power is ON.

Ships ready to use. Just add modules, patch cables, and inspiration.

Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules.

Can be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.

Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: ALM Busy Circuits' Din-Sync Adapter cable lets users route "clock" and "run" Din-Sync signals via two 3.5mm mono jacks. It's a great way to sync one's Eurorack modular sequencer with external drum machines, synthesizers, and more.

Notes: These cables are designed to interconnect pro audio gear with unbalanced mini phone jacks. They are ideal for use with modular synthesizers and sound modules.

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 3.5 mm TS to Same
Conductor: 26 AWG OFC
Shield: 85% OFC Spiral
Quantity: 8 pc

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: NiftyBUNDLE is a collection of Cre8audio's most essential euro rack synth components:

Case, modules, power, MIDI to CV, and "enough patch cables to get into trouble" are all included.

The NiftyBUNDLE is made up of the following Cre8audio components:

NiftyCASE

The Cre8audio NiftyCASE is a moderately sized euro rack case with HUGE possibilities!

NiftyCASE is more than just a basic eurorack case; it provides all the power and connection possibilities you could possibly ask for. NiftyCASE offers a beefy 2A of cumulative current via its +12v -12v and +5v power rails, ideal for all your modules.

Connecting your NiftyCASE to computers or MIDI devices is a breeze thanks to the built-in MIDI to CV conversion. NiftyCASE takes either DIN-MIDI from any DIN-MIDI device or USB-MIDI from your computer and turns it into eurorack compatible CV, gate, mod, and clock signals.
NiftyCASE's DIN-MIDI thru lets you easily daisy-chain multiple NiftyCASES and easily integrate NiftyCASE with your MIDI equipment.

The NiftyCASE is the perfect size for a portable eurorack case being 84hp wide; that means NiftyCASE isn't super tiny or super huge- it's just the right size for all of the cardboard boxes they're shipped in.

Chipz and Cellz modules

Chipz is a chiptune-inspired eurorack synth module, which will take you back to the halcyon sounds of the '80s.

Cre8audio describe chips as ideal for those who speak "bleep blop". They say that Chipz is "full of heaping piles of beeps, blops, and probably some other stuff too. It's got a couple of voices and some wacky LFO junk, perfect for getting your body wobbling"

Putting all of that into language you might understand a little more, Chipz is a dual VCO and dual LFO module with each offering sine, triangle, saw, square, and noise waveforms.

Cellz is another wacky module from the deranged minds over at Cre8audio. A programmable CV touchpad where each touch segment can be tuned to 2 different CV values then played by hand, sequenced, and arpeggiated.

Box 'O' Cables & Blanking Panels

To get you up and running, the NiftyBUNDLE also comes with Cre8audio's Box 'O' Cables, allowing you to get patching and making noise straight away. The NiftyBUNDLE also includes some Cre8audio branded panel blanks to fill empty eurorack space.

Included in the NiftyBUNDLE:
NiftyCASE
NiftyCASE 15v 2.4A PSU
Chipz
Cellz
Box 'O' Cables
2x Cre8audio "8" panel blanks

Specifications:

Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5?off = 0 on = 4.65?
Voltage output gate 2 - off =0 on =5?off = 0 on = 4.65?
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Get your patch cables out of the way of your patching with these right-angle patch cables. Pack of 8 cables are available in the Modbap Modular brand colours - blue, pink, black, and white. Lengths are 6inch, 9inch, 12inch, and 18inch.

What's in the package:

2 x 6" (blue)
2 x 9" (pink)
2 x 12" (black)
2 x 18" (white)

Notes: The ultimate Eurorack case.

At home, stage or into the studio, the Befaco 7U Case brings your system to the next level.

Power to the people

Equipped with Befaco's latest and most sophisticated power supply (Trolley Bus), the Befaco 7U Case supplies up to 5000mA of power. Ready to feed the most modern and power-hungry modules.

Connected to the world

The Befaco 7U Case rear panel count with a vast array of connections to pair your system with external devices. Each connector follows the Intellijel format, making them fully compatible with Intellijel's 1U modules.

Build to last

Designed with a high-quality Unibody Black Anodised Aluminum frame, the Befaco 7U Case is a slim and sturdy solution to travel with. The included PET-G clear cover keeps your modules safe even patched.

Designed to fit any situation, the Befaco 7U Case metal frame is a lightweight and strong device by itself. With a maximum depth of 53mm (power supply side) and 70mm (rest of the case), it can house the vast majority of modules out there. Equipped with a high-quality anti-vandalic power button and a Kensington lock connector, the Befaco 7U Case is also a safe device to travel with.

Because power is important for us, this new Trolley Bus systems drop up to 5000mA on the +12V rail, 2500mA on -12V, and 4000mA on +5V with high voltage stability under load and low noise. The case drives up to 36 modules over its 208HP (3U) and 104HP (1U) rows (Intellijel format).

6x 6,3" Jacks I/Os with Balanced and Unbalanced configuration, MIDI In/Out/Thru ports, USB Device Type B, and Apple compatible USB-A charging ports. The Befaco 7U Case offers a huge amount of connections fully accessible from its internal I/O Board.

Created with compatibility in mind, the rear panel ports are fully compatible with Intellijel 1U modules. The 1U row can be easily customized to be at the centre of the case with just two screws.

To keep your modules safe and dust free, a custom PET-G clear cover is included with the case. The cover has been designed to close patched, and a custom velcro belt is included to keep it safely closed.

To save space in your studio desk, the Befaco 7U Case is also Vesa mount fully compatible. It counts with Vesa threads at the bottom to easily attach it to desktop or wall Vesa stands.

Technical Specifications

External Dimensions (without cover): 53.5cms x 31cms x 8cms
External Dimensions (with cover): 53.5cms x 31cms x 14cms
Internal Row Dimensions: 2x 3U 104HP and 1x 1U 104HP (Intellijel format)
Power supply Specifications: +12V: 5000mA, -12V: 2500mA, 5V: 4000mA
Module Depth: 53mm (power supply side), 70mm (rest of the case)
Module Slots: 36
Weight (without cover): 2.6kg
Weight (with cover): 3.4kg
Rear connectors: 6x 6'3" Jack I/O (Balanced or Unbalanced), MIDI DIN In/Out/Thru, USB Device Type B, Apple compatible USB-A charging ports.
Power brick: 120W 2.5mm Barrel connector centre positive (included)
Cover: PET-G Clear cover (included)
Finish: Black Anodised Aluminum
Vesa 100 format threads. Recommended Vesa stand: >12kg
Kensington Lock

Notes: Mono 3.5mm mini jack to mono 6.35mm (1/4") jack cable.

Useful for connecting eurorack modules (i.e S.B.G.) to external music equipment.

Custom ALM barrel moulding matching ALM's patch cables.

2m length.

Notes: These cables are designed to interconnect pro audio gear with balanced phone jacks. They are ideal for use with balanced phone patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 1/4 in TRS to Same
Conductors: 26 AWG x 2 OFC
Shield: 85% OFC Spiral
Quantity: 8 pc

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Flying Bus Board for up to eight Eurorack modules.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: 16-conductor ribbon cable with four 16-pin connectors (20" total length), for connecting more than 2 modules in a Pod.

Notes: Z-Rails Brackets are used to attach Z-Rails to wood cases without having screws visible on the exterior for a clean, professional finish. Z-Rails Brackets have two holes for wood screws and two holes for Z-Rails screws. Z-Rails Brackets come supplied with both types of screws and no additional screws are required for assembly.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.