Back in stock: All genres

Notes: Buzz. Beep and bloop. Get high on the lo-fi sounds of "old-school" games, toys and terminals!

The Mainframe provides sample rate reduction ranging from 48kHz to 110Hz. A little background... the sample rate is the number of times per second that a sample or snapshot of an analogue signal is taken. For example, CDs (remember them?) had a sample rate of 44.1kHz which means that the original analogue signal is sampled 44,100 times per second.

The sample rate defines the frequency range that can be reproduced while maintaining good fidelity. When the sample rate is reduced the quality of the audio is degraded and aliasing occurs. Aliasing means audible artifacts created when higher frequencies are sampled at an inadequate rate and the result is distortion. The Mainframe's sample rate range is wide enough to take you from sounds that are quite pristine to sounds that are unrecognizable when compared to the input signal.

It also provides bit crushing ranging from 24-bit to 1-bit. What does that mean? Bit crushing is bit depth reduction. Back to the CD example... CDs used a 16-bit bit depth meaning that each of its samples was represented by 16-bits of information. Higher bit depths can accurately represent a greater dynamic range while bit crushing increases the number of sampling errors and creatively degrades the sound to bring us back to those nasty "old school" sounds we love.

The Mainframe's selectable High/Low/Band-Pass filter lets the user shape the artifacts of the bit crushing and sample rate. Another very cool feature is its Sample Rate Tuning Mode where the pedal analyses your input signal in real-time and sets the sample rate to match the pitch of your signal, or a set interval above your signal. This allows you to set the sample rate to match the key of a song, or it will continually adjust the sample rate based on what you play!"

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 90mA
Year Released: 2020

Notes: Amazing analogue delay plus chorus and vibrato!

The EHX Memory Boy straps on the cape and flies with heritage into the search for amazing sound at a price that mere mortals can afford.

The Memory Boy uses the Deluxe Memory Man as a base, expanding upon it with additional modulation features and an optional Expression Pedal input allowing external control over Delay Time or Modulation Rate.

The Memory Boy carries the performance heritage for warm analogue delays and modulations that made its ancestors the go to legends that remain today. With two years in design, the focus was making the legend affordable to every musician while maintaining the character and artistic sounds that let you stand apart.

All analogue delay with Feedback
Up to 550 ms delay time
Selectable Chorus or Vibrato modulations rates
Choose between triangle or square modulation waveforms
Expression pedal control of delay time or modulation rate (expression pedal extends the range of modulation rate)
True Bypass
Power adapter included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25 121 x 102 x 57
Current Draw: 60mA
Year Released: 2009

Notes: Mix up to four stereo channels in just 4hp, or chain multiple modules together to add channels. Inputs are normalled for mono operation. Simple, compact and high quality at a reasonable price.

Supplier's Notes:
4xSt.Mixer is 4 HP quad stereo mixer.

Right inputs are normalled to Left inputs for easy mono operation

Several 4xSt.Mixers can be chained together or with other HN stereo modules via sockets on the back side

65 mA +12V
50 mA -12V
35 mm deep

Notes: Noise Random Tools comprises a collection of useful utility blocks that you could use in many of your patches - Clock, Random Pulse, Analog Noise, Sample and Hold, and Slew.

Features:

- Clock and Random pulse source with adjustable rate
- Analog pink and white noise source with very accurate spectrum
- Analog sample / track and hold with very low droop
- Analog slew with adjustable slew rate

Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.

Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.

Notes: Mighty oscillations, mini size.

An analog oscillator and LFO with pure waveforms and precise tracking in a compact package. Perfect as a utility modulation source but equally capable to be used as a primary sound source. Patch it up and let it rip!

Features
Four simultaneous pure waveforms: Sine, Triangle, Square and Sawtooth
Pitch input for 1V/Oct tracking and FM
SYNC input for Hard Sync. This input has a comparator so that you can use a variety of waveforms as triggers.
Switch to select VCO (audio) or LFO range of operation
Three position Octave switch to jump pitch up or down by two octaves
PITCH knob has three octave range in VCO mode (extended to seven with the octave switch) and seven octave range in LFO mode (extended to 11 with the octave switch).
Bicolor led indicates the state of the triangle core rate

Specs
Width 14HP
Depth 37.5mm
Power 19mA @ +12V
16mA @ -12V

Notes: The Cab X2 is the latest digital cabinet simulation and impulse response pedal from MOOER Audio, featuring stereo input and output, build-in factory simulation models, and support for third-party impulse response files.

The Cab X2 provides robust stereo support for users that need to take their favorite digital cab sims and IR files from their laptop to the stage. The Cab X2 supports flexible stereo setups, allowing the option to bypass the cab sim pedal itself and connect to an external amplifier, sound board, PC, or pedal board. Two footswitch modes are also included and can be configured as a traditional on/off switch or to cycle through presets.

Designed to make management of all your presets and IR files simple, the Cab X2 editor software is free to download for MacOS/Windows and makes setting up your X2 fast and easy. Simply download the software, connect your X2 with the included USB cable, and tweak your cab simulation files to perfection.

While away from your PC, the Cab X2 includes a headphone jack to keep everything nice and quiet while you manage presets on-the-go or for practice.

Features:
High-quality, IR-loading stereo cabinet simulation pedal
Includes 14 user preset slots that can store two different cabinet simulation settings each
11 factory cabinet simulation files with support for loading third-party impulse response files
Choose between mono or stereo setups with the ability to bypass the cab sim for each channel
Footswitch can be assigned as a traditional on/off switch or to switch between presets
Comes with specialized editor software for preset management and IR loading

Specifications:
Input: 2*1/4" monoaural jack (Impedance value: 1M ohms)
Output: 2*1/4" monoaural jack (Impedance value: 510 ohms), 1*1/8'' stereo audio output jack (Impedance<1 Ohms)
Power supply: 9V DV center negative (Please ensure the voltage value of power supply is not more than 9V, ensure the polarity is correct.)
Current Draw: 300mA
Dimension: 0.334kg
Weight: 75mm(D)*115mm(W)*33mm(H)
Accessories: Owner's manual, USB TYPE-C to TYPE-A cable; DC 9V power supply, sticker

Notes: The first pedal to get the X2 treatment is the D7 X2 Delay Pedal. With the 14 high-quality delay effects, this pedal features more than double the effects of its skinnier brother, the D7 Delay, while also adding stereo inputs and outputs. The array of delay effects in the D7 X2 have a wide range from classic analog and tape delays to more modern and experimental delays such as "Low-Bit", "Galaxy", and "PingPong". Adjustable parameters are different based on each effect and can be customized with the Tweak 1 and Tweak 2 knobs. Additional parameters can be adjusted by using the MIX, TIME, and FEEDBACK knobs. Timing of each delay can be adjusted with the TIME knob or by using the TAP TEMPO footswitch for quick adjustments on the fly.

Notes: The R7 X2 Reverb combines MOOER's best digital effects algorithms from the A7 Ambiance and R7 Reverb pedals and combines 14 different types of high-quality stereo reverb in to one ultimate pedal. Parameter knobs include High Cut, Low Cut, and Mix for adjusting the EQ and Decay and Pre-Delay knobs for adjusting the intensity of each effect. Unique features of the R7 X2 include the Infinite and Trail-on functions to customize how each effect fades out.

Each pedal features a single designated save slot for each effect where users can save their settings after being tweaked to perfection. A BYPASS footswitch is included for easy toggling. Simultaneously pressing the TAP and BYPASS switches turns on Preset Rolling Mode to switch between saved presets easily

14 different reverbs

Classic: Room, Hall, Church, Cave, Plate, Spring, Studio

Modern Ambient: Mod, Reverse, Wrap, Shake, Crush, Shimmer, Dream

Notes: The Nektar Impact GXP49 USB MIDI controller keyboard is designed for players: Experience 49 semi-weighted keys and instant access to performance controls including a real-time repeat engine, powerful Nektarine plugin patch management and Nektar DAW Integration. GXP gives you the keys to a great performance!

GXP Keys
PLAY - Treat your fingers to a dynamic semi-weighted keyboard with velocity and aftertouch that captures all aspects of your performances.

GXP Repeat Section
REPEAT - The Repeat Engine lets you create inspiring rhythmic elements with direct and intuitive realtime access from dedicated Repeat controls.

Impact GXP Transport
DAW CONTROL - Control essential DAW functions directly from Impact GXP using the dedicated transport controls. Supports 12 DAWs.

GXP Software Bundle
PRODUCE - All you need to create is included: Licenses for Steinberg's acclaimed Cubase LE Music Production Software and Retrologue virtual synthesizer.

KEYS: JUST THE RIGHT TOUCH
At the core of GXP49 is a newly designed and carefully balanced keyboard action. Its 49 semi-weighted full-size keys with velocity and aftertouch deliver a nice, firm touch and great playability.

Impact GXP 49 Front left view
Choose from 5 different velocity curves to tailor Impact GXP's keyboard sensitivity to your personal needs. The curves cover a wide dynamic range from soft to hard touch. The default curve "normal" is optimized to deliver good control across the whole velocity range right out of the box. In addition, 3 fixed levels let you send fixed velocity values across the whole keyboard if needed.

Nektar Impact GXP49 Control

DIRECT ACCESS: THE CONTROLS YOU NEED
The streamlined no-fuss control panel is based on the successful Nektar Impact GX-series, enabling advanced DAW integration with extended transport control, track selection and volume control as well as options to open/close DAW windows and navigate songs. In addition, GXP88's user interface also has 14 assignable illuminated RGB buttons for direct MIDI program- and bank-selection.

Impact GXP is a MIDI controller as well as a DAW controller:
If you use MIDI software that's not supported by Nektar DAW Integration, you can also set up MIDI control yourself. The assignable buttons in the transport section can be configured to send out Program message or MMC (MIDI Machine Control) transport control. In addition, any of the 28 assignable MIDI buttons, the modulation wheel, keyboard aftertouch, foot switches and of course the big control knob, can be assigned to send out MIDI cc messages. The settings are stored over power cycling.

GREAT CONNECTIVITY:
MIDI, PEDALS, POWER
The GXP49 gives keyboard players all the right expression options needed for live and studio work. It offers large pitch bend & modulation wheels and connections for up to 3 optional external pedals: Connect any standard expression pedal to the first, and any standard footswitch to the second socket. And if you use an optional Y-cable adapter, the footswitch socket even supports two independent switches.

Impact GXP Pedal Connections
Impact GXP Back Panel
Impact GXP can also be used stand-alone with external MIDI gear: The rear panel includes a 5-pin MIDI out jack and an external power supply socket for powering the unit when not connected via USB.

GXP Repeat Section 2

REPEAT: GET INSPIRED
The Repeat Engine is great for creating inspiring rhythmic elements: Simply press the dedicated Repeat button, play and get inspired.

The RGB buttons now give you direct one-button access to Repeat Rates, Accent, Interval, Swing and routing aftertouch or modulation to velocity. The large Data/Tempo Encoder turns into a dedicated tempo control, unless synchronization is set to external MIDI clock.

Choose from 5 different key trigger modes to change the repeat behaviour from interesting arpeggio-style effects with human feel to hard-quantized repetitive rhythms. Repeat is a fun way to experiment and create those famous "happy accidents", that make you come up with unexpected new ideas.

GXP Repeat Engine

NEKTAR DAW INTEGRATION: GIVE YOUR MOUSE A BREAK!
Install Nektar DAW Integration and the 8 buttons right above the wheels let you take control of essential tasks in your DAW right from Impact GXP. Features cover extended transport control including goto and set locators, track navigation, volume control, launching windows and patch navigation - without ever reaching for the mouse.

Notes: Open up your signal routing options with this neat and simple pedal. Split one signal into three, run effects in parallel, mix three signals together, set up ABY routing or set levels. Versatile.

Supplier's Notes:
The Signal Blender provides a number of parallel routing solutions through its use of a pair of send/returns, primary input and output, switching, and volume control.

Signal Blender can be used as a:
Parallel effect blender
3-to-1 mixer
1-to-3 splitter
Active ABY in either direction
Volume level setter

and more.

A courtesy 9V power outlet and phase correction switches for both Sends add further versatility to this box. Clever switching allows for latching or momentary on/off action.

The Signal Blender uses standard 9V center negative power, and has a current draw of 31 mA.

Notes: This module is a 8 ins and 8 outs precision buffered matrix.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every switch for visual info of the signal that is going thru it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 8 outs, 2 x 4 outs, 4 x 2 outs or any other combination.

62 mA +12V
65 mA -12V