100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back In Stock: All Genres

View:
Options
Artikel 1 bis 30 von 30 auf Seite 1 von 1 anzeigen
2hp
Cat: 727385 Rel: 02 Oct 19
 
High fidelity audio processor focused on granular synthesis
Notes: 2hp Grain is a high-fidelity audio processor focused on granular synthesis. It's capable of generating granular clouds, microsound phrases, and unique textures that are derived from any input signal. The Density control sets the rate of granularization applied to the input signal and sets its position within the buffer. The Mix control sets the balance between live input and the granular audio stream for dialling in the perfect combination of sounds. In addition, there is a frequency control and associated v/oct input allowing for pitch accurate sequencing of grains. Particle patching has never been smaller with Grain.
Read more
 1 in stock $157.97
Cat: 637047 Rel: 22 Mar 17
 
Model D-based complex envelope generator - dark edition
Notes: AJH Synth have had quite a few requests for a variant of MiniMod contour generator with Release added to the envelope so that it is full ADSR but still with the characteristics of the Model D - so this is what they have done!

The DH-ADSR is exactly the same circuit as the original Model D envelope and therefore features the same contour shape and retrigger behaviour, but with the addition of a release control. However, they have also added a pulse delay and pulse stretch circuit, along with a re-trigger facility (both of these can be switched out of circuit so that the envelope is a simple ADSR unit).

The addition of pulse stretching and retrigger makes it into an LFO module and it can perform in a similar way to the EMS Synthi A and VCS3 Trapezoid generator, with a variable delay between each trigger and a variable "on" time - however it can also have full ADSR envelope on each retrigger too!

Notable Features:

- PREDELAY - This control determines how long (up to 10 seconds) the start of the envelope is held off, after a gate is received. This ability to delay the onset of the envelope is especially useful when used in conjunction with a standard ADSR: With both envelopes receiving the gate simultaneously complex envelopes can be produced as the DH-ADSR only starts running through its stages after the standard ADSR has completed. Once their outputs are mixed together in a mixer a single evolving envelope with multiple stages is produced!

- Use of the bipolar mixer found in the MINIMOD CV MIX-OFFSET-VCA module can enhance this technique even further, with more precise control over the polarity/offset of the envelope mix possible. Using the VCA of this module could allow for external modulation over either/both of the signals. It goes on...

- HOLD - When in Del-Hold mode (switch down) the HOLD control determines the gate length applied to the envelope, and thus controlling its length/overall shape. When the switch is up, normal ADSR action is produced.

- RETRIG - In this mode the DH-ADSR becomes an LFO, which can mimic the "Trapezoid" function of the vintage EMS designs. HOLD controls the length of the trapezoid shape, and PREDELAY allows for adjustable gaps between each repeat of the shape produced.
Read more
 1 in stock $226.16
Cat: 673533 Rel: 02 Jan 18
 
4 HP auto-tuner module
Notes: You can't tune two VCOs to note A in less than a minute? You need the Autopilot! Simply connect oscillators and a pitch CV source, press the module's button and wait for a few seconds. It doesn't get any easier than this.

The Autopilot features two identical tuners for precisely calibrating oscillators to note A.

The procedure:

- Connect the Drop Out socket of the tuner to the 1v / octave input of the VCO.
- Patch the VCO's waveform output to the Tune In connector of the tuner.
- Connect a sequencer or keyboard to the tuner's Key In socket.
- Press the tuner's button and wait a few seconds.
- Done

With a long press on both tuner buttons, the reference pitch can be shifted from 440 Hz to 432 Hz.
Read more
 1 in stock $117.95
Cat: 553603 Rel: 19 Nov 14
 
Quad multimode filter synth module
Notes: In our project Orage Magnetique to recreate a sound spaciolab to recreate sounds from space , this quad multimode filter has been designed to simulate the action of magnetic fluctuations on the sound landscape. The effecs of ionisation variations are modified by the different filters cutoff frequencies and the way they are synced. The module Fluctuations magnetiques (magnetic fluctuation) is a module from the modular synthesizer Orage Magnetique. This quad mutimode filter combines 4 independent multi-mode filters with selectable low-pass, band-pass & hi-pass. Each filter can be synced to one another to build to a 48dB low-pass/hi-pass filter or 24dB band-pass. Each filter has an modulation input and an individual output to create stereo effects a well as quadriphonic textures. The filters A & B and C & D can be used in parallel mode or serial mode.
Read more
 2 in stock $194.76
Cat: 563665 Rel: 11 Mar 15
 
Passive multiple synth module, 2HP wide
Notes: Dual 4-way passive mult (one audio or cv signal in with multiple unbuffered outputs)

On the back of the pcb is a pair of solder points marked as "link". You can connect these (with a solder blob or small jumper wire) to turn the mult into a single 8 channel Mult instead of 2 x 4 channel.
Read more
 5 in stock $31.92
Cat: 620700 Rel: 10 Aug 16
 
Versatile Multimode VCF + Phaser synth module in Eurorack format - 10HP wide
Notes: The Polaris is a 4-stage cascaded OTA filter designed by David Dixon. It builds on the lineage of the Dr. Octature and Atlantis filters, but with a totally revised core and resonance control. Along with dedicated LP, HP and BP outputs it features a configurable MULTI output capable of an unprecedented 27 different filter modes.

With drive turned down the Polaris is capable of buttery smooth filtering, and the cutoff control range has been fine-tuned for playability. With the drive dialled up and the new asymmetric multi distortion circuit engaged it creates a more aggressive sound. Not content to be just a filter, the Polaris's AP phaser mode combined with frequency modulation can be used to achieve a phaser effect.

With so much versatility in a modest size, the Polaris is an ideal filter for a starter system and an excellent addition to the tonal palette of a larger modular.
Read more
 1 in stock $220.73
Cat: 664819 Rel: 03 Oct 17
 
4 stage function generator or ADSR module - 8HP
Notes: CONTOUR is a 4 Stage function generator, or ADSR, derived from our 0-COAST synthesizer. It is designed to create control voltages to drive the Dynamix, modDemix and other fast VCAs, VCFs, and more. The Contour takes inspiration from the original Loudness Contour circuit of the MiniMoog, which is perhaps the most well-known example of East Coast Synthesis. The simplified control set (where Decay adjust both the decay to Sustain and the Release) makes it quick and intuitive to set-up. The Contour module adds full voltage control, a mirrored output, End of Onset and End of Contour Gate outputs which allow it to be highly integrated into any modular synthesizer regardless of coastal allegiance.

Width: 8HP
Depth: 24mm
Power @+12V: 36mA
Power @-12V: 16mA
Read more
 2 in stock $116.87
Cat: 703388 Rel: 15 Oct 18
 
World's first and only 3D Cartesian Sequencer for music synthesisers - 34HP
Notes: The Rene music synthesizer module is a powerful three-dimensional prism of composition. It is the world's only 3D Cartesian Music Sequencer. Named for the French philosopher & mathematician Rene Descartes, it uses the Cartesian coordinate system to unlock the analogue step sequencer from the shackles of linearity. The original Rene was a one-channel, two-dimensional Cartesian sequencer with limited memory, this new Rene is a three-channel, three-dimensional Cartesian sequencer with memory for up to 64 complete States. Considering the multiple channels and FUN programming options per multiple axis, Rene has become an n-dimensional matrix or tesseract of synthesizer sequencing.
Read more
 9 in stock $495.59
Cat: 627828 Rel: 31 Oct 16
 
Compact sequencer and control station with 8 channels of gates, each with up to 16 steps
Notes: VARIGATE 8+ is designed to be the ultimate compact sequencer and control station over an entire Eurorack modular system. Create songs and live performance material with 8 channels of gate outputs with up to 16 steps per channel, 2 independent CV outputs for custom scale quantization, easy recall of 10 storage banks and 100 channel presets, random functions, mute functions and so much more!
Read more
 1 in stock $464.20
MFB
Cat: 695618 Rel: 16 Sep 19
 
Analogue VCA with built-in oscilloscope
Notes: The Visual VCA is a voltage controlled, analogue amplifier module with additional waveform display. The signal amplification can be regulated via the two CV inputs. CV1 is usually controlled by the envelope. A special feature is CV2, because this input can only be used in conjunction with CV1 and is normally used for modulation effects. The integrated oscilloscope represents the waveform of the input signal and has a resolution of 128 x 64 pixels. With the interval controller you can set the sampling frequency.

The power consumption is +/- 30 mA. The module has a width of 8 HP (40 mm).
Read more
 2 in stock $89.81
Cat: 719670 Rel: 02 Sep 19
 
Dual attack/decay envelope
Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
Read more
 1 in stock $45.44
Cat: 719665 Rel: 02 Sep 19
 
Sample & Hold module
Notes: The purpose of the SAMPLE&HOLD module is to "freeze" the input voltage with a trigger input.

Typically used for random CV patterns if a noise signal is fed to the input and triggered e.g. by an LFO.
Read more
 2 in stock $29.76
Cat: 719668 Rel: 03 Sep 19
 
Dual voltage controlled amplifier module
Notes: 2VCA contains two separate VCA (voltage controlled amplifiers); the classic module to shape the volume of a sound that is fed to IN by a control voltage, e.g. from an ENV to the CV input.

A switch determines the operation mode (DC/CV or audio), choosing the right position can reduce/avoid pop's with short attack envelopes.

An additional knob for each VCA attenuates the level, if necessary.
Read more
 2 in stock $31.37
Cat: 719689 Rel: 02 Sep 19
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
 2 in stock $36.78
Cat: 719687 Rel: 02 Sep 19
 
4 minijack inputs/outputs
Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.
Read more
 2 in stock $39.50
Cat: 719661 Rel: 02 Sep 19
 
Binary divider for incoming signals
Notes: A binary divider for incoming signals. It can be used either for dividing clock signals (e.g. from an LFO, BEATDIVIDER) by 2 / 4 / 8... 128 for rhythmical purposes but also for audio signals - in this case you get subharmonics/lower octaves squarewaves at the outputs, which can be mixed or used separately.

The reset input resets all output signals; in case of audio signals this can get quite unique, ringmodulator-like sounds.
Read more
 2 in stock $37.86
Cat: 719657 Rel: 02 Sep 19
 
Filter module
Notes: This filter module is a variant of the Wasp filter, a quite strange circuit used first in the EDP Wasp synth end of the seventies, which abuses digital chips in an analogue way leading to the characteristic sound of this filter type. In this module, vactrols are used for controlling the filter frequency.
Read more
 2 in stock $38.94
Cat: 719658 Rel: 02 Sep 19
 
Stereo headphone amplifier
Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.
Read more
 2 in stock $37.86
Cat: 719685 Rel: 02 Sep 19
 
Lowpass gate module for AE modular
Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
Read more
 2 in stock $38.14
Cat: 719648 Rel: 02 Sep 19
 
Master I/O module
Notes: The MASTER module is the base of every AE modular system - it contains;

- The voltage regulation (5V) for the power supply of the modules
- MIDI input (minijack; Breakout cable to DIN-5 socket is available separately)
- In/out-sockets (3.5mm minijack) for audio out and/or interfacing with a Eurorack system
- All bus signals (CV, GATE, CTRL, MIDI clock/start/stop) as patch sockets

The power supply is a 9V DC adapter; it can be connected either at the side or on the top of the module.
Read more
 2 in stock $59.50
Cat: 719693 Rel: 02 Sep 19
 
Classic VCO for AE modular
Notes: The VCO module is a "classic" VCO featuring:

- Two CV inputs 1V/octave
- MODulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse/Fine knob for frequency
- Pulsewidth knob for squarewave
- Square/Triangle/Sawtooth output

The module works well if you need an oscillator for primary musical/melodic use.
Read more
 1 in stock $40.03
Cat: 590433 Rel: 19 Jan 16
 
Percussion synthesiser module reverse-engineered from the original TR-909 circuit - 8HP wide
Notes: Reverse-engineered from the original machine, our BD909 is an identical recreation of the original all-analog drum circuit of the TR-909. We've added additional controls and synthesis features that turn this classic circuit into a chest-pounding analog bass drum laboratory - all tightly packed into an 8HP module. The BD909 sound differs from our BD808 in that the main sonic energy is centered in the mid to low frequency range (as opposed to the low frequency range of the BD808). This frequency range gives the needed headroom allowing your bass Lines to deeply fill up the low end while the kick drum rides on top - creating a clear and punchy mix.

The BD909 includes all the controls found in the original: Attack, Decay, Tune Decay, Accent and Level. We have gone beyond that and added controls that further increase the palette of sound this circuit is capable of. First off, we've added a tuning control knob for the oscillator and included its own CV input and attenuator that let you tune your 909 kick with your bass lines. Next, we added control knobs for the tuning attack and extending tuning decay - each one affects the other, allowing for very intuitive and interactive sound shaping - this feature opens up numerous "sweet spots", and provides the ability to center the energy peak at different parts of the sound. Finally, we offer additional punch and distortion by giving complete control over the internal waveshaper, which allows you to overload the waveform manually or with voltage control.

Beginning with the classic and pure sound of the 909 kick, these additional functions greatly expand the BD909's flexibility and let it create powerful analog bass drums that range from soft and smooth to punchy and aggressive - and everything in between.
Read more
 1 in stock $161.23
Cat: 590435 Rel: 09 Nov 15
 
Percussion synth module with TR-909's original closed and open hi-hats circuits adapted for use in Eurorack modular synthesiser format - 8HP wide
Notes: Introducing the HATS909, part of our new series of drum modules that brings those classic percussion sounds into the modular synth world, instantly turning your system into a self-contained music machine.

The HATS909 is the TR-909's original Closed and Open Hi-Hats circuits adapted for use in Eurorack modular synthesizer format and was tested to sound like a machine coming fresh off the assembly line back in the 80's Improving on the original, we have added some great new features that expand the sound palette of hats that can be produced with this small, powerful module.

The original TR-909 circuit is made with a combination of low-fi 6-bit sound samples that pass through a series of analog elements to provide envelope and filtering to the source sound. The HATS909 module allows for manual and voltage control of the sample's tuning, which provides anything from crushed hats and short ticks to the original sound and anything in between. A modulation switch allows you to tap a voltage control to either the tune input or the internal VCA for modulation with external control signals or for adding AM or FM synthesis in the audio range from external oscillators, other drum sounds, or just about any sound source. HATS909 also offers a switch for a direct tap to the output of the original sample, bypassing all other internal analog processing, giving you the pure source sound for synthesis any way you want with your own modules.

Just like the other drums in this series, the HATS909 high-powered output gain stage allows you to further harmonize the sound through distortion and clipping. On each gate input, we have designed a dual pulse-shaper circuit so you can trigger your HATS909 with trigger/gate signals from step sequencers, clock dividers, or any other pulse/clock sources.
Read more
 1 in stock $186.11
Cat: 641102 Rel: 27 Feb 17
 
24bit, 96k 4HP mono sample player
Notes: ONE brings organic sound and super low latency sample playback to the modular. It differs from other sample players in that it handles the digital audio bits as a continuously manipulated electrical flow, a feature inspired by our analog knowhow. This unique core makes ONE truly integral within the Tiptop percussive modular ecosystem thanks to a lightweight and responsive digital circuit with a very analog feel.

ONE brings a world of colours to the modular right out of the package. We have invited some of the best sound designers in the Industry to create professional sound libraries with content tailored to the unique sonic framework of the modular synthesizer and that fully takes advantage of ONE's unique qualities. To start with, ONE comes with a SD card loaded with a free set of 60 sounds designed by Glitchmachines. More cards are available to purchase separately each containing carefully selected material with up to 256 sound files. Using your own sample libraries or recordings is easy too, just copy 16 or 24bit mono WAV files onto the SD card, pop the card into ONE and go.

ONE offers several modes of operation, with the primary being the super low latency Trigger mode that retrieves audio data off the SD card adding no artificial processing such as click removal, crossfading, EQ or gain normalization. In this mode, it's a highly transparent player up to 24 bit 96kHz with no interpolation of the audio data: what you put in is what you get out. With a delay as low as 0.25ms from the moment the trigger hits, ONE offers harmonically dense, clear and detailed audio with a great rhythmic feel.

ONE handles external CV through a user selectable multifunction jack. Pitch is the main control with two modes available: Free pitch allows for fine tuning of the playback rate, great for adding subtle vibrato or wild tape speed effects; Quantized pitch maps CV to the standard 12 tone system over 3.5 octaves and is ideal for melodic content. CV can also be used to sequence through files off the SD card allowing far more varied sounds from a single source; almost like an entire percussion section behind the slim panel.

Although originally designed to play tightly with our analog drums and envelopes, ONE's rich sound quality encouraged us to make it work in a variety of other applications that are less demanding of sub millisecond timing response. The extra headroom at the core level allows features such as Gated playback, Looping, and Triggering with fades in and out to accommodate different types of sound sources from drum loops to polysynth chords to noise sources and other yet unimagined uses.

ONE offers another useful dimension since it can play CV signals too. Drop in a card with LFO signals, random CV, slopes and envelopes for a whole set of new control and modulation possibilities.

ONE is as simple to use as it is affordable and plays extremely well with its analog cousins - our vision for bringing samples into the modular world.
Read more
 1 in stock $164.48
Cat: 601462 Rel: 05 Apr 16
 
Reverb cartridge for TipTop Audio Z-DSP with 8 original algorithms
Notes: The Z-DSP Shimmer cartridge has 8 original algorithms, designed to combine lush reverberation with multiple voices of pitch shifting, to create ethereal pads, rich chordal textures, dissonant clouds of sound, and a variety of other sounds that are perfect for electronic music. The algorithms are customized to work with the Tiptop Audio Z-DSP Eurorack module.

There are 6 reverb algorithms in the Z-DSP Shimmer cart, arranged in order of complexity:
- Fast Shimmer: A modulated reverb that quickly decays away into an endlessly pitch shifting tail. The shift interval can be set between +/- 12 semitones. Perfect for that classic "octave up" shimmer sound.
- Slow Shimmer: Similar to Fast Shimmer, but with a much slower attack.
- Dual Shimmer: Two pitch shifted voices, embedded within a larger modulated reverb network, shifting the reverb decay in both positive and negative directions. Try slowly sweeping the Shift control in this mode for ridiculously cinematic sounds.
- Triple Shimmer: Two pitch shifted voices embedded within the reverb decay network, plus a third voice external to the network. This allows the user to have a reverb with +12 and -12 semitones of feedback, plus a stable +7 semitones voice without feedback.
- Quad Shimmer: Four pitch shifted voices feeding into a lush modulated reverb. This allows for a variety of dissonant and consonant chordal textures, with the max Shift setting corresponding to a rich major chord.
- ClusterVerb: Four pitch shifted voices embedded within the feedback network of a modulated reverb. The result quickly becomes dissonant or metallic. Perfect for insta-Ligeti, or Penderecki In A Box.

In addition, the Z-DSP Shimmer cart features 2 special effects algorithms:
- Quad Detune: 4 short pitch shifted delays, feeding back on each other. A variety of chorus, detuned, and dissonant effects can be obtained through this mode. Turn up the Feedback for maximum fun.
- PitchEcho: A single pitch shifting voice, combined with a tape echo emulation = sound mangling joy. Turn up the feedback for barberpole self-oscillation, and sweep the decay time for all sorts of swoopy glitches.
Read more
 1 in stock $72.77
Cat: 696915 Rel: 27 Jul 18
 
8HP voltage-controlled ADSR envelope with CV processor - 'New Style'
Notes: The Z4000 NS is a snappy voltage-controlled analogue envelope generator with a built-in CV processor for scaling, inverting, and voltage-controlled deviating of the envelope shape. The Z4000 generates an envelope made of the four classic segments: Attack, Decay, Sustain and Release, in which each segment can be manually set using knobs or dynamically set under voltage control.

Control knobs for the Attack, Decay, and Release segments are scaled. The first 0-50% of the knobs rotation is dedicated to high resolution adjustment in the millisecond range.

The output levels are fully adjustable with signals that can reach up to 10V in either polarity and can be mirrored into the opposite polarity or clipped using the voltage-controlled deviater-scaler. A bi-colour LED indicates intermediate values in both polarities and their crossfade state.

The Attack slope switch allows selection of a logarithmic or exponential curve for the Attack segment. This subtle effect helps further the fine adjustment of the Attack segment slope. A Shoot button is provided to let you fire the envelope manually. The Z4000 also provides a retrigger input allowing you to create legato notes when using a classic keyboard interface.

Going down to nuts and bolts, the Z4000's smoothness and snappiness is made possible by a four-segment active-charge discrete circuit which is an extended version of circuits found in classic two-segment rise/fall transient generators.
Read more
 1 in stock $155.82
Cat: 725952 Rel: 25 Mar 19
 
Two flexible mixers & function generator in one module - 18HP
Notes: The Control Voltage Processor from Verbos Electronics GmbH is a suite of control voltage processing possibilities divided into 3 sections in a slim 18HP package. The lower 2 sections are DC coupled mixers that allow mixing, inverting, offsetting, scaling, multiplying, dividing, crossfading or a combination of these functions. The top section is a voltage controlled slewing processor with independent control of Positive and Negative slew rate, with some unique tricks. The Positive and Negative slew, or Rise and Fall rates if you like, have reversing attenuators. The slopes can be blended from linear to RC curves (starting all slides fast and ending slow, like a proper "East Coast" Portamento) without a change in speed. It can be triggered like an AD envelope and has a Gate out that goes high when the CV out is below 100mV. Of course it can loop by patching the Gate out to the Trigger in. The Bounce control adds a unique flare of overshoot to CV changes, a bit like the effect of stopping a tape reel from turning and then letting it go. The combination of multiple voltage processors offers the user the functions of analogue computer.
Read more
 1 in stock $491.27
Cat: 696393 Rel: 06 Aug 18
 
Dual channel digitally controlled VCA - 4HP
Notes: The DVCA is a redux of the classic WMD Digital VCA module, giving it more features while reducing its size and power consumption.

Channel A is now unipolar/bipolar switchable, allowing for use as a bipolar VCA.

With control parameters for bias and CV, users can create classic ring modulation and attenuversion effects. Channel B still has the character and features of the Digital VCA.
Read more
 1 in stock $192.60
Cat: 665765 Rel: 14 Nov 17
 
Eight-channel mixer module designed especially for live performances & jam sessions - 40HP
Notes: A game changing mixer for live performance within the Eurorack modular synth ecosystem.

The Performance Mixer is an 8 channel audio mixer designed specifically for live performance and jam sessions within the modular ecosystem. With 12 audio inputs for the first 6 channels, and 2 true stereo channels, there is plenty of room for all your modular signals and more.

2 mono auxiliary sends with dual mono returns, stereo send and return, and another set of stereo mix inputs give you the routing you need to send signals to interesting effects as well as utility uses such as bus compression and master equalizers.

Tired of not being able to tune oscillators and program sequencers on the fly? Not to worry, the performance mixer also includes a cue mix section so you can monitor your incoming signals in headphones before sending them to the front of house mix. Just like on a traditional DJ mixer, the cue mix knob determines how much of the cue vs the FOH mix you hear in the phones.

Two headphone outputs for convenience and teamwork. Collaborate with friends without wasting any channels by sending the stereo output of their mixer into the unity gain mix input. Monitor with the dual headphone outputs and you can both hear the entire mix.
Read more
 4 in stock $636.25
Cat: 665768 Rel: 15 Feb 18
 
Expander module for the WMD Performance mixer
Notes: PM Db25 is a proprietary expand module for the WMD Performance Mixer that allows for direct access to each output, balanced, including channels expand and the main outs. Connect a Db25 snake to your choice of connector on the other end and record each individual out without destruction from the faders or mutes. Reference the stereo recording while making final edits in your DAW or tape machine.
Read more
 2 in stock $226.14
Artikel 1 bis 30 von 30 auf Seite 1 von 1 anzeigen

Filter

Back In Stock: All Genres
Back in stock period
Release Date
Featured
Close