Back in stock: All genres

Notes: Introducing the DD-8, the most wide-ranging and feature-rich BOSS compact series delay ever. This loaded pedal delivers more of everything-more great sounds, more delay time, more control options, and more connectivity. And it does it all in a standard BOSS pedal that slides easily into any mono or stereo setup. Eleven modes provide delay colours from basic to exotic, plus a looper with unlimited overdub capability and external control support. For maximum versatility in a minimum amount of space, there's no better delay stomp than the DD-8.

Equipped with a diverse selection of delays, the DD-8 packs impressive sonic range into one small pedal. Clean digital delays, vintage analogue and tape types, and modulation echo are available, plus specialty delays like shimmer and reverse. There's a new Warm type for softer echo tones, and a +RV type that blends delay and reverb together. Warp is perfect for dynamic ambient textures, while the new GLT type is great for glitchy rhythmic effects.

Everything sounds bigger and better in stereo, and the DD-8 delivers with full stereo I/O support and your choice of three output modes. The default independent mode provides linked parallel delays on the left and right channels, allowing you to maintain the true balance of stereo input sources in the effect sound. There's also a panning mode for ping-pong delay effects, and a wide stereo mode for enhanced spatial depth.

The DD-8's extensive real-time delay options help bring your music to life. You can tap in tempos with the onboard pedal switch, and control the Warp and GLT modes for unique expressive effects. Adding one or two footswitches unlocks more creative possibilities, like on-demand tap tempo, extended looper control, and a cool Twist effect for soaring echo sounds. Alternately, an expression pedal can be used for continuous control of level, feedback, or delay time-or all of them at once.

Having a looper on your pedalboard is a handy thing-it's great for practice, checking sounds at gigs, and creating on-the-fly backing while performing. The DD-8's looper mode has you covered, so you don't have to take up precious space with a dedicated pedal. All looper functions can be controlled with the onboard switch, providing all-in-one operation. But if you prefer to work with extended controls, just connect one or two footswitches to operate the looper's stop and clear functions externally.

The DD-8's inputs and outputs have smart functionality, allowing you to set the pedal for any application simply by connecting cables in different ways. A variety of mono and stereo connections are supported, including discrete dry and effect outputs for wet/dry setups. It's even possible to defeat the dry signal entirely, perfect for delay-only blending in a parallel effects loop.

Analog-Classic analogue BBD delay sound.
Standard-Clear digital delay.
Tape-Vintage tape-based delay sound.
Warm-Digital delay with a softer sound.
Reverse-Backwards delay for cool psychedelic effects and other unique tones.
+RV-Digital delay with reverb added.
Shimmer-Pitch-shifted delay for lush, shimmering textures.
Mod-Digital delay with modulation added on the repeats.
Warp-Unique delay with expressive pedal control. Holding the pedal switch increases feedback and level, allowing you to create ambient swell effects.
GLT-Newly developed delay mode that creates glitchy machine-gun effects when the pedal switch is pressed. Adjust the Feedback and Time knobs for a wide variety of sounds.
Loop-Loop recorder with overdub capability and up to 40 seconds of recording time with mono input (20 seconds with stereo input).

Specifications

Nominal Input Level: -20 dBu
Input Impedance1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT-A(MONO)/INPUT-B jack: 1/4-inch phone type
OUTPUT-A(MONO)/OUTPUT-B jack: 1/4-inch phone type
TEMPO/EXP jack: TRS 1/4-inch phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 100 mA

Expected battery life under continuous use
Alkaline: Approx. 3.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb

Notes: Want to take more of your gear with you when travelling? UDG presents the UDG Creator Wheeled MIDI Controller Case Black 22" to bring you the perfect solution for flying and travelling with MIDI controller, laptop and any additional hardware.

UDG Creator Wheeled MIDI Controller Case Black 22" means more equipment with no compromise on convenience and protection. Featuring protective padded compartments and padded secure strap. It's the only trolley gear bag available that is large enough to house controllers such as the Pioneer DDJ-FLX4/ REV1/ 200/ 400/ SB3 or NI Traktor S3/ S2 MK3/ S4 MK3. Made of tough, durable black exterior & interior material, sturdy in-line wheels for easy transport and mobility with paddings in all the right places for the ultimate carrier of your valuable equipment.

Specifications
Colour: Black
Weight: 3,90 kg / 8.58 lbs
Outer Dimensions (W x H x D): 67.6 x 43.0 x 25.0 cm | 26.6 x 16.9 x 9.8 inch
Inner Dimensions (W x H x D): 56.0 x 36.0 x 10.5 cm | 22.0 x 14.2 x 4.1 inch
Material: Water resistant Ballistic Nylon 1680D

Protection:

Padded compartment for controller or mixer with padded secure strap
Padded compartment for up to 17" laptop
Padded pocket for up to 9.7" tablet and small accessories
Smooth rolling in-line wheels with high quality in-line skate bearings

Extras

Includes removable paddings to fit various controllers
Rear-access pocket for magazine/document
Retractable handle with 2 stage internal trolley system
Additional cable pouch
Soft padded carry handle

Fits:

Pioneer DDJ-FLX4, DDJ-REV1, DDJ-200, DDJ-400, DDJ-SB3, DDJ-RB, DDJ-SB2, DDJ-SR2, DDJ-RR, DJS-1000,
CDJ-3000, DJM-900NXS2,
NI Traktor S3, S2 MK3, S4 MK3, S5, S4 MK2, S2 MK2, Komplete Kontrol A25, Maschine Studio,
Denon DJ Prime Go, MC3000, MC4000, MC6000 MK2,
Reloop Elite, Beatmix 2 MK2, Beatpad MK2, Terminal Mix 4/ 8,
Akai MPC Live II, APC 40, MPK 25,
Novation AFX, Peak, Nocturn 25, Remote SL MK II, Zero SL MK II,
Numark Mixtrack Platinum FX, Mixtrack Pro FX, Mixtrack, Mixtrack II/ III, Mixdeck Express, Mixtrack Platinum, Mixtrack Pro/ II/ III, NV II,
American Audio Encore 2000, VMS4, VMS5,
Roland TR-808, TR-909, DJ-707M, TR-8, TR-8S, DJ-202, System-1,
Rane Twelve, Seventy-Two, Seventy,
Gemini G2V, G4V, GMX,
M-Audio Exponent,
Hercules DJControl Inpulse 500 DJControl Jogvision, DJControl Inpulse 300,
Korg Minilogue XD,
up to 17" laptop, up to 9.7" tablet, audio interface, books and magazines