Back catalogue: All genres

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: Revolt - 6 Battery Kit - USB Solution for AAA and AA Battery Devices kit lets you power any device that needs 2 x AAA batteries, or 2 x AA batteries, from a USB port instead.

Kit contains 3 x AAA bridge cables - each gives the device a DC power jack input, 3 x AAA dummy batteries, 6 x AAA to AA adaptors, 2 x Crazy Chain Mini cable and a 3V Ripcord USB cable.

The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.

Why buy ReVolt?

Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed
Included in the 6-battery kit:

3 x ReVolt AAA Bridge cable with smart battery
3 x AAA dummy battery: insert into battery compartment alongside the smart battery
3 x AAA to AA adaptors: for powering devices requiring AA batteries
myVolts 3V Ripcord USB to DC power cable: for powering 2-battery devices from a USB port
2 x Crazy Chain Mini cable: daisy-chain up to 4 battery devices, power all from one USB port

Notes: Acc-Sees Pro Vinyl 45 Case (100) features a lightweight and robust aluminium design with a durable stucco finish creating a stylish and highly effective vinyl transport / storage solution. The fully lined and padded interior provides total protection to your 45 / 7" collection. Features a fully removable lid with egg crate foam for added protection and has secure lockable catches. Comfortably holds 100 x 7" records with a useful internal divider. The new resized MkII version can accommodate 7" records with poly sleeves Perfect protection for your 45's.

Notes: Sometimes it is the little, simple things in a DJ's life that make the job easier. Reloop's vertically adjustable, foldable Laptop Stand Flex is the right choice when there is not much space in the DJ booth or if you need a light, absolutely sturdy laptop stand for the road. When folded, Reloop's Laptop Stand Flex can be placed in every equipment bag thus becoming a safe, rugged companion for your club gigs. And thanks to the vertical adjustment it can be adapted to every setup.

Notes: Acc-Sees Pro Vinyl 45 Case (100) features a lightweight and robust aluminium design with a durable stucco finish creating a stylish and highly effective vinyl transport / storage solution. The fully lined and padded interior provides total protection to your 45 / 7" collection. Features a fully removable lid with egg crate foam for added protection and has secure lockable catches. Comfortably holds 100 x 7" records with a useful internal divider. The new resized MkII version can accommodate 7" records with poly sleeves Perfect protection for your 45's.

Notes: LOCI Crate 30 is a 30hp case for small Eurorack configurations. Supplied with strong 3D printed LOCI Rails (inspired by vector rails) and stainless steel threaded strips. At just L49.99 RRP inc VAT it's an incredibly affordable route into the modular synth world.

Great for small Eurorack Modular setups.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.

Notes: External footswitch. Accessory for Sidekick JR.

Use the XT footswitch to control the operation of the modulation section of the Sidekick JR independently. Engage or true bypass the modulation effect.

XT footswitch bypasses the onboard modulation operation assign toggle switch of the Sidekick JR.

Connect to the XT jack input of the pedal.

Passive operation - no power needed for the XT footswitch to operate properly - use standard TS instrument jacks / cable only.

XT footswitch function is not affected by the power-up bypass/engage preset function of the onboard footswitches of Sidekick JR.

Dimensions (W x L x H) : 54 x 51 x 49 mm
Weight 0.91 kg
Made in Greece

Notes: Introducing the Decksaver cover for the Korg Wavestate synthesizer - the ultimate protection for a synth that has the power to revolutionize your music production. When a synth comes along that changes your whole approach to making music, it becomes an invaluable part of your creative process. The Decksaver cover ensures that this remarkable machine remains in pristine condition, safeguarding it from dust, liquid spills, and accidental impacts.

Crafted with precision in the UK, the Decksaver cover is meticulously trimmed to provide a perfect fit for the Korg Wavestate synthesizer. Its design takes into consideration every aspect of the synth, allowing you to keep it fully assembled while providing reliable protection. The cover is manufactured from super durable polycarbonate, a transparent and hard-wearing material that shields the delicate controls and internal components of your Wavestate from potential damage.

The Korg Wavestate is a powerful and innovative synthesizer that opens up new sonic possibilities. Its unique sound engine and vast array of controls allow you to create complex and evolving soundscapes with ease. With the Decksaver cover, you can keep your Wavestate ready for operation at all times, knowing that it is protected from the elements that can compromise its performance.

Transporting your Korg Wavestate is made worry-free with the Decksaver cover. Its slim profile and precise fit enable it to slide effortlessly into a flight case or soft bag, providing maximum protection during transportation. Whether you're taking your Wavestate to a live performance, a recording session, or a jamming session with fellow musicians, the Decksaver cover ensures that your synth arrives safely and securely.

The Decksaver cover not only shields your Korg Wavestate from physical damage but also safeguards its longevity. By preventing dust accumulation and accidental spills, the cover helps maintain the pristine condition of the synth's controls and internal components. Whether you're using your Wavestate at home, in the studio, or on stage, the Decksaver cover ensures that it remains a reliable tool for your musical endeavors.

Invest in the Decksaver cover for your Korg Wavestate and give your synth the protection it deserves. Let your creativity flow freely, knowing that your machine is shielded from harm. With its durable construction, precise fit, and unwavering defense, the Decksaver cover offers peace of mind and ensures that your Korg Wavestate remains an integral part of your musical journey for years to come.

Fits both the MK1 & MK2 Wavestate and Modwave devices.

Key features

Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Keeps settings and controls in place when not in use.
Low profile design enables compatibility with most flight cases and travel bags.

Fits

Wavestate
Wavestate MK2
Modwave
Modwave MK2
Opsix

Dimensions

Weight: 1.25 kg
Length: 57 cm
Width: 34.5 cm
Height: 3.8 cm

Notes: cosMik 10 is a cardioid condenser microphone that can be universally used for vocals, acoustic guitars, in front of a guitar cabinet and much more.

Designed to always give dynamic professional studio quality results, cosMik 10 provides world class sound to capture musical details, harmonics, and subtle nuances that get lost easily with many comparable microphones. The low self-noise allows you to capture the whole dynamic range with exceptional detail, making this microphone the universal solution for any recording studio.

The cosMik 10 with its unique stylish and yet compact body is provided with a table stand, windshield shield foam and an XLR cable so that you can get started right away.

cosMik 10 is available on its own as well as in our U22 XT cosMik Set studio recording bundle.

Features/specifications

Condenser studio microphone
Cardioid polar pattern
Special 1" diaphragm size
30Hz - 18kHz frequency response
> 132dB dynamic range
135dB max. SPL
100 ohm output impedance
5dB self noise (A weighted)
Requires +48V phantom power
XLR connector, cable included
Table stand included
Windshield foam included
Weight: around 160g

Notes: Sometimes a synth comes along which changes your whole approach to making music - these amazing machines must be protected! Dust, liquid and accidental impact have taken many a good analogue synthesizer down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Subsequent 25/Sub Phatty can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, in the studio and onstage. Decksaver's Subsequent 25/Sub Phatty cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers.

Length: 52.4cm
Width: 32.3cm
Height: 6.7cm
Material: Smoked polycarbonate

Notes: Coming out of Bristol, England, the UDO Super 6 Desktop is a fully-featured analogue-hybrid 12 voice synthesizer that packs the same punch as the original Super 6 but with the benefits of a more compact footprint.

The magnificent vibrant warm sounds that come from the device have to be heard to be believed.

With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.

Working with these wonderful units, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting UDO device.

With years of experience working with plastics, Decksaver have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

The super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.

Dressing your unit in a Decksaver cover should mean you will never have to worry about your Super 6 getting damaged at home, in the studio, or at the gig.

Dimensions

Weight: 0.686 kg
Length: 46 cm
Width: 30.3 cm
Height: 5.2 cm

Notes: The Waldorf Iridium, M & KYRA machines are gloriously high-quality devices, with each one having its own unique synth capabilities.

Just on the base level, the Kyra has a 128-Voice virtual analog synth with 8 parts, whilst the Iridium has a 16-Voice Synthesizer and the M has an 8-Voice Polyphonic Wavetable Synthesizer.

That is just the surface level of musical power they have.

With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.

Working with these wonderful units, we have designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of these exciting Waldorf devices.

With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

This super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.

Dressing your Waldorf in a Decksaver cover should mean you will never have to worry about your Iridium, M or KYRA getting damaged at home, in the studio, or at the gig.

Fits:

Iridium
M
Kyra

Dimensions:

Weight: 0.665 kg
Length: 44.5 cm
Width: 30.8 cm
Height: 4.5 cm

Material: Smoked clear polycarbonate.

Notes: One ear for the show, one ear for the live feed or the director: the IE PRO Mono Cable keeps one ear free for comfortable interaction with your team, the environment or guests. Thanks to its transparent and twisted design, the cable is both elegant and discreet. If connected to stereo signal only left signal will be transmitted. Can be used with any IE 100/400/500 PRO in-ear headphones. The cable construction is designed to be tension-safe and can withstand any live situation. Can be worn left or right.

Cable length: 1.3m

What's in the Box:

1 IE PRO Mono Cable (1.3m)

Notes: Protect your Moog Subsequent 25 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 25 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access

Notes: Loci Dinky

A great modular stand suitable for smaller items such as tablets all the way up to desktop modules.
Assembled in seconds
Super strong desktop stand
Precision laser cut from 6mm oak veneer
Beautifully detailed
Non-slip bands
Packs flat to slide in your case

Notes: Adds weight to the record to both stabilise uneven records and steady rotation speed.

Doubles as centrepiece for singles.

The record weight gives you:

- Smoother, richer tonal balance
- Increased dynamic range
- Vast improvement in overall soundstage clarity and instrumental definition
- Improved bass response
- Substantial reduction in vinyl noise floor
- Increased vinyl longevity

Notes: Updated version of the hugely popular mobile audio interface. Just about as compact as it gets but with all the functionality you'd expect for getting quality sound in and out of mobile devices.

Supplier's Notes:
Make your go-to mic go farther

Like many of today's musicians, YouTubers, and broadcasters you probably rely on the professional sound quality you get from using an XLR microphone. But for mobile, on-the-go audio and video creation, XLR mics present some challenges. Many require phantom power, and at best, using them also means dragging along a laptop and boxy audio interface to get the mic preamps along with the phantom power you need.

iRig Pre 2 is a pocket-sized mic preamp that lets you easily use your XLR mics to record, perform and stream with your iPhone*, iPad, Android device or DSLR camera. The sequel to the best-selling mobile mic pre of all time, iRig Pre 2 delivers the same professional sound you're accustomed to, while adding direct monitoring, auto-switching wiring for use with digital cameras, and so much more.

All powered up

Need phantom power for your condenser mic? iRig Pre 2's 2 AA batteries provide true +48V phantom power (many other mobile mic preamps only offer 32V, degrading your mic's performance) for around 7 hours of continuous use.
To use your favorite dynamic or ribbon mic, simply turn off the phantom power and you're good to go for even longer, up to 20 hours!

Don't waste a take

A time-saving 3.5mm (1/8") headphone output now offers direct monitoring, so you can listen back to ensure the signal is perfect before you start recording or streaming!
It's perfect for all today's popular live-streaming and video recording apps, so you can hop from app to app with confidence you'll always sound your best.
And for DSLRs and digital cameras, it makes set up a snap without needing to dive into menus or set up alternate workarounds to monitor the sound.

Works in more situations

You can easily access your favorite apps while recording or performing by mounting the iRig Pre 2 to your mic stand or other convenient stage locations using the included Velcro strip slot. For secure mic stand mounting for your connected smartphone, tablet or digital camera, be sure to check out our iKlip series, which offers a choice of flexible-mounting options for a variety of scenarios.

Ready to rock, right out of the box

Even if you're new to mobile audio and video creation, you can get started right away by simply downloading two free IK Multimedia apps from the App store or Google Play: iRig Recorder FREE (our easy-to-use audio and video recording/editing app) and VocaLive FREE (our premium vocal processor for live performance and multi-track recording).
So get ready to break out of the box and start exploring the creative possibilities all around you, with the freedom of iRig Pre 2.

The Creator series from IK Multimedia puts you in the spotlight with fast and easy tools to help you create professional content. Its budget-friendly solutions are ideal for YouTubers, podcasters, live streamers and other social media platforms, and include a variety of mobile and studio-friendly microphones, interfaces and smartphone stands. With convenient features and flexible options, you'll be covered wherever and whenever inspiration strikes.

Technical Specifications:

Frequency response: from 20 Hz to 20 KHz +/- 1.5dB
EIN (@gain min): -113.5 dBA
EIN (@ gain max): -92.4dBA
THD+N: -90 dBA / 0,003%
Gain range: 48dB
Phantom max current: 6mA
Battery duration (Alkaline 2xAA): approx 20 hours when phantom is off, approx 7 hours when phantom is on

Includes:

iRig Pre 2
2xAA batteries
Velcro strip
Free apps for iOS and Android

Dimensions:

Size: 40mm/1.57" x 110mm/4.33" x 34mm/1.34"
Weight: 75g/2.65oz (batteries excluded)
Cables length: 40cm/15.75"

Compatibility:

iOS and Android Devices

Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.

DSLR Cameras

Compatible with most DSLR cameras equipped with 1/8" / 3.5mm jack microphone input.

Notes: Desktop USB soundcard for a computer-based recording studio. Featuring 2 independent microphone inputs on XLR/jack sockets and a separate 6.3mm instrument input. Each input has a gain control and there is an optional echo effect with separate control. Monitoring is via a stereo 6.3mm headphone jack or L+R RCA line output on the rear of the unit for connecting monitor speakers. Power to the interface and two-way digital audio is connected via a USB type-C socket at the rear. Simple yet versatile operation for project studios and DAW recording setups.

Power supply: 5Vdc (from USB)
Connection: USB type-C
Controls: Mic1, Mic2, Inst3, Effect, Monitor
Input connections: 2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power: +48V switchable to XLR inputs
Frequency response: 10Hz - 30kHz (-0.5dB)
Input impedance: instrument1M Ohm
Input impedance: mic3k Ohm
Max. input sound level: Mic or Instrument +2dBu, Line +22dBu
Dynamic range: 100dB (A-weighted)
Sampling format: 48kHz, 16-bit
Monitor outputs: Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions: 160 x 110 x 57mm
Weight: 529g

In the box

The box for this item contains:

USB2+1 Audio Interface
1.5m USB C to A lead

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: U22 XT offers a maximum of flexibility as fully bus powered USB device with pristine professional 24-bit audio quality.

The interface features 2 analog input and 2 analog output channels with RCA line inputs, a microphone preamplifier with XLR input and support for +48V phantom power, a Hi-Z instrument input for guitars, a high quality headphone output and TRS line outputs. Master and headphone volume as well as monitoring are controlled on the front panel.

On the software side, U22 XT provides low latency drivers with support for WDM, ASIO 2.0 and CoreAudio based on our EWDM and DirectWIRE technology.

Included with U22 XT is the Bitwig Studio 8-Track software, the trim and effective digital audio workstation to start producing, performing, and designing audio like a pro. With Bitwig Studio 8-Track, you can start working right out of the box without other additional software. Record and arrange, improvise and perform, or do it all at once, with this professional solution developed by musicians, for musicians.

If you're looking for a really powerful USB audio solution for your PC or Mac to start working out of the box, then U22 XT is for you!

U22 XT is also available as a complete recording bundle with a microphone and headphone, the U22 XT cosMik Set.

Features
2 input / 2 output 24-bit / 96kHz USB 2.0 Audio Interface
microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered
max. 24bit/96kHz
line input with RCA connectors
line output with balanced 1/4" TRS connectors
headphone output with 1/4" connector
ADC with 102dB(a) dynamic range
DAC with 108dB(a) dynamic range
input / output monitoring controlled on front panel
master volume control on front panel
supports Windows Vista, Windows 7, Windows 8.1, Windows 10 and Windows 11 with ASIO 2.0, MME, WDM and DirectSound incl. DirectWIRE support
supports Mac OS X (10.7 and above) via the native CoreAudio USB audio driver from Apple (no driver install required)
supports many Linux distributions via the ALSA USB audio class support
includes Bitwig Studio 8-Track digital audio workstation software
includes license of inTone 2 ESI Edition from Audified
dimensions roughly 17.5cm x 12.0cm x 4.5cm

Notes: Triple MDF stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined from MDF and fits any 3 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


A Digital DJ looking for a professional, durable case solution for your Pioneer XDJ-700/Numark PT01 Scratch Turntable USB? Then look no further, as UDG have developed a super light EVA hard case designed for life on the road.

Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior, this case provides protection against drops, scratches & liquids.

Skilfully designed & moulded to fit the Pioneer XDJ-700/Numark PT01 Scratch Turntable USB, this case is perfect for travelling DJ's who need to protect their equipment.

Fits: Pioneer XDJ-700/Numark PT01 Scratch Turntable USB plus power adapter and extra cables.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: One of Native's latest creations has its ergonomic stand ready for studying.

Now you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.

At the base, there are 3m rubber feet so that the equipment does not move at any time.

Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm

Notes: The latest addition to the Roland TR family has its exclusive stand.

Specially designed for the Roland TR-8s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland TR-8s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland TR-8s.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Models: TR8S, MC707

Notes: What started as a simple plan to develop a new line of patch cables, quickly became an engineering feat in typical Joranalogue fashion. After countless hours of stripping cables, benchmarking crosstalk and high frequency performance, and designing in-house cable testing tools, Patch is the result of these efforts.

Patch is a series of top-quality patch cables for the discerning modularist, available in black and white, and a variety of lengths. Constructed using a custom-made coaxial base cable and over moulded mini-jack plugs, protected by unique laser-cut aluminium shells, these Eurorack cables are designed to outlast and outperform.

Lengths 15, 30, 60 and 90 cm are available in 8-packs, while the extra-long 150 cm cables are supplied in 4-packs.

Premium patch cables with 3.5 mm mono mini-jack connectors for Eurorack modular synthesiser use.
Engineered for audio, CV as well as analogue video signals.
Unique anodised aluminium shells and heavy duty bend reliefs for long life span.
7 inner signal and 40 outer shield conductors of 100 % ultra-pure oxygen free copper.
Extra-flexible PVC outer sleeve: satisfying 'droop' without crinkles.
Safely packaged in a reusable cotton bag with branded hook-and-loop cable tie included.
Incredibly fun to patch with. (Seriously!)
Designed in Belgium; made in China.

Notes: The Cntl Knob is an affordable, compact, easy-to-use pedal that delivers static remote control for devices with expression control jacks. It lets you set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The pedal's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. LEDs indicate which knob is active and can be powered by your pedalboard's power supply or an optional EHX's 9.6DC200mA PSU.

To maximize the Cntl Knob's compatibility with other products it's equipped with a TRS+/- Button that lets you match its expression polarity with the device being controlled. For extra convenience it comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Electro-Harmonix introduces the compact Cntl Knob which lets a player set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The Cntl Knob's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. A TRS+/- Button matches the expression polarity of the Cntl Knob to the product being controlled and ensures maximum compatibility with pedals by all makers. LEDs indicate which knob is active and can be powered by a player's pedalboard power supply or an optional EHX's 9.6DC200mA PSU.

The Cntl Knob (Control Knob) comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Notes: These solid oak end cheeks have been precision-machined and hand finished from FSC certified European Oak.

These cheeks have the option of 2 different working angles and heights to suit your needs.

The stand is assembled by removing the original aluminium end cheeks and replacing them with these, using the supplied 6x screws.

Please note: you will get only the 2x oak end cheeks, so you must purchase your own ASM Hydrasynth.

The item will need assembly as it is sent flat packed, all screws are provided this includes small rubber feet.

Notes: 10 white vinyl record dividers in a leatherette boxset.

Notes: The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360- well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear.

Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

Specifications

Colour: Black
Weight: 1,85 kg / 4.07 lbs
Outer Dimensions (W x H x D) - Folded: 28.0 x 27.3 x 3.5 cm | 11.0 x 10.7 x 1.4 inch, Unfolded: 28.0 x 27.3 x 26.5 - 38.0 cm | 11.0 x 10.7 x 10.4 - 14.9 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Z-style set-up position to accommodate heavier production gear
Airflow constructed tray prevents equipment from overheating
Rugged, durable metal construction, anti-scratch resistant powder coating

Extras

Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
360 degree rotatable laptop tray
2-clicks quick-release mechanism for easy assembly and breakdown
No loose parts
Protective transportation sleeve included

Fits:

Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear. Maximum load: 15.0 kg / 33.06 lbs

Notes: The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360- well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear.

Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.lbs

Specifications
Colour: White
Weight: 1,85 kg / 4.07 lbs

Outer Dimensions (W x H x D)
Folded: 28.0 x 27.3 x 3.5 cm | 11.0 x 10.7 x 1.4 inch - Unfolded: 28.0 x 27.3 x 26.5 - 38.0 cm | 11.0 x 10.7 x 10.4 - 14.9 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Z-style set-up position to accommodate heavier production gear
Airflow constructed tray prevents equipment from overheating
Rugged, durable metal construction, anti-scratch resistant powder coating

Extras

Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
360 degree rotatable laptop tray
2-clicks quick-release mechanism for easy assembly and breakdown
No loose parts
Protective transportation sleeve included

Fits:

Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear. Maximum load: 15.0 kg / 33.06 lbs

Notes: ***B-STOCK: Box opened, product in perfect working order***


Protect your Moog Subsequent 37 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 37 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access

Notes: Keep your headphones safe for many sessions and gigs to come with the PULSE Case For Studio Headphones! This durable molded case can fit any model of professional studio monitor headphones from Beyerdynamic, Sennheiser, Shure, Sony, Audio-Technica, and other leading brands. Like all PULSE cases, this case is compact and ultra-lightweight, so it's easy to travel with.

Description

The PULSE Case for Studio headphones is made from durable and lightweight EVA, designed to protect and preserve your headphones during transport. EVA is often used in sports equipment for its shock-absorbing capabilities, so you be confident your studio headphones will be well protected. The case's interior is lined with soft velvet, which will help prevent scratches and any snags on your headphones.

The PULSE Case For Studio Headphones is a universal case that can fit any professional studio monitor headphones. This includes the most popular models from Beyerdynamic, Sony, Sennheiser, Shure and more!

Specifications

The perfect size to fit most professional studio headphones
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 8.62 x 6.69 x 4.09 inches
Exterior dimensions: 9.65 x 7.48 x 4.33

Notes: Glide Case for the Teenage Engineering OP-1 Field or OP-1

Redesigned for 2023, Analog Cases' classic OP-1 case is now the perfect travel solution for either the OP-1 Field or the original OP-1!

Protect your investment and keep your OP-1 in mint condition with our lightweight and durable GLIDE case - the first and only case that's custom-moulded to the exact dimensions of this amazing machine.

Description

Now you can enjoy peace of mind when packing up your OP-1. This moulded case features a water-resistant faux leather exterior material, plus a layer of rigid moulded foam that surrounds your OP-1, providing excellent protection.

The subtle diamond pattern on the exterior surface makes this case smooth and sleek, and there's even a mesh compartment for holding cables or other miscellaneous items. The compact form factor makes it easy to put the case inside your backpack or suitcase.

Specifications

Perfect fit for your Teenage Engineering OP-1
Premium faux leather exterior and faux fur lining
Mesh compartment for holding cables
Exterior dimensions 12 x 5.5 x 1.5 inches
Interior dimensions 11.5 x 4.4 x 1.3 inches

Notes: PULSE Case for Korg Drumlogue

Looking for a way to keep your KORG Drumlogue drum machine protected on the go? Look no further than our PULSE case. Specifically designed to fit the Drumlogue and its power supply, this case is the ultimate solution for traveling musicians who want to keep their gear safe.

Crafted with a super soft velvet interior, the PULSE case will protect the wooden side panels and sleek aluminium exterior of your Drumlogue from scratches and other damage. Additionally, a handy mesh pocket is included to store any extra cables or accessories you may need for your performances. Don't risk damaging your gear - keep your Drumlogue safe and sound with the PULSE case.

Description

Inside the case, you'll find a luxurious velvet-like material that will keep your gear safe and snug. On the outside, the case is made from durable EVA that holds its shape, so you can be confident that your equipment is well-protected.

Thanks to the handy moulded rubber handle, transporting this case is a breeze. Plus, its compact size makes it easy to tuck into a larger backpack or suitcase when you're on the move.

Designed to accommodate your Drumlogue and power supply, this case has everything you need to create music on the go. And with a roomy interior pocket, you'll have plenty of space for cables and other essential accessories.

Specifications

Perfect fit for your Drumlogue + cables
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Interior dimensions 14.96 x 7.32 x 3.15 Inches
Exterior dimensions 15.94 x 8.86 x 3.39 Inches

Notes: The Critter & Guitari Organelle M is an extremely mobile machine. This GLIDE case has been custom molded to fit and protect your Organelle M when you're on the go.

Description:

Made to easily fit into a backpack or suitcase, this case provides real protection. The exterior is rigid, and is topped with waterproof faux leather, while the interior features a soft velvet lining. There's even an interior pocket for storing your cables. With a snug fit, you won't need to worry that your Organelle M could be dislodged during transport.

Specifications:

Perfect fit for your Critter & Guitari Organelle M

Premium faux leather exterior and soft velvet lining

Mesh compartment for holding cables

Interior dimensions: 13.5 x 3.5 x 2.5 inches

Notes: The Blackbox and Bluebox gives you complete recording and mixing capabilities in the palm of your hands. With a portable sampler and mixer this powerful, you're going to want a case to protect it while you're on the go.

The GLIDE case for the Blackbox and Bluebox is custom molded to fit perfectly, exactly without taking away from the amazing portability of the device. The high resolution touch screen on the Blackbox and Bluebox are great for writing full songs or applying effects with a minimal design, so a case that prevents any scratches or cracks will be a lifesaver.

The GLIDE Case is made of durable and stress tested EVA material, which will prevent any damage from drops or spills, and it also features an interior pocket to hold any cables for recording in the wild.

Custom designed for the 1010music Blackbox and Bluebox

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 6.25 x 5.5 x 1.5

Notes: Durability is a key feature of this stand. We understand the demands of a busy studio environment, and we've built this stand to withstand the test of time. Its sturdy construction ensures stability and reliability, providing a secure base for your equipment. This way, you can focus on creating music with confidence, knowing that your gear is well-supported.

At the core of CoverUp's production process is the use of recycled sticky woods. By repurposing and transforming these materials into an innovative stand, we give new life to what was once considered waste. With this sustainable approach, we not only reduce the strain on natural resources but also promote a circular economy, where materials are reused and repurposed to minimize waste.

Beyond its practicality, the Stand adds a touch of elegance to your studio setup. Its sleek design and natural wood texture provide a visually appealing backdrop for your synth, elevating the overall aesthetics of your workspace. The stand seamlessly integrates with any decor style, allowing you to create a studio environment that inspires your creativity.

Keep your studio organized and optimized for productivity with the Stand. Its compact footprint and efficient design ensure that your workspace remains clutter-free, giving you the freedom to focus on your music. With everything neatly organized and within reach, you can streamline your production process and unleash your artistic potential.

Upgrade your music production setup with the Stand. Experience the perfect blend of ergonomic design, durability, and sustainability. By choosing this stand, you're not only investing in a high-quality product but also making a positive impact on the environment. Embrace the future of music production with this exceptional stand that combines functionality with sustainability.

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

***Please note: The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: This ergonomic stand model is specially designed for the new sampler/sequencer by Teenage Engineering. To achieve a more comfortable use of this beautiful machine, we decided to offer two possible positions: Studio and Live.

The Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.

Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: A good delay was an essential part of the classic analog synthesizer sound. More often than not, that delay came from a tape-style echo machine until affordable digital delays were created. The Monotron Delay is an analog synthesizer optimized for sound effects. In addition to its analog oscillator, filter and LFO, it also provides a space delay that's indispensible for swooping, cosmic sounds. The monotron Delay even reproduces the pitch changes that occur when you vary the delay time, just as though you were using an analog tape echo. This fat and warm delay will add an authentic edge to your analog sounds.

It also features Korg's class VCF filter for full control over your sounds. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Delay uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

Create classic sounding analogue tape delays to add warms and new dimensions to your synth sounds. Also included is Korg's fantastic enhanced ribbon controller keyboard, while a mini jack input also allows you to run any external audio, such as a Kaossilator, digital piano or guitar, through the Monotron Duo. As standard, the Monotron range comes with a powerful built-in speakers and is battery operated for the ultimate portable experience.

The Low Frequency Oscillator (LFO) waveform used to modulate the pitch now offers a choice of waveshapes, which is a new square wave plus the traditional triangle wave. Both the rate (speed) and the intensity (depth) can be adjusted independently. In addition, a trimpot on the back panel can continuously adjust the shape/direction of the triangle wave or the pulse-width of the square wave to deliver even more versatility. Used in conjunction with the delay, the LFO can create dazzling effects and provide unique possibilities for embellishing your songs.

The Monotron Delay's ribbon controller keyboard features a wide, 4-octave range. This design allows the pitch to be controlled even more aggressively and dynamically, making the Monotron Delay a great weapon for a DJ to get the floor moving with irresistible sound. The reversed white keys and body adornments glows under black light illumination, making the monotron Delay ideal for delivering a striking visual impact in nearly any club environment.

The input jack (AUX input) built into the Monotron Delay's compact body allow you to place any audio source into the Monotron Delay's signal path, directly before the analog filter and delay circuit. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter and delay effect.

A miniature speaker is built into the Monotron Delay. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Delay's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

Notes: A good quality Euro style album record case. The product features lift off hinges and a butterfly catch. Holds 70 records

Notes: Introducing the ultimate guardian for your prized Ableton Push 3 - the Decksaver cover! Unlock the full potential of your music production powerhouse while ensuring it remains in pristine condition for years to come. Crafted with meticulous precision and unrivalled expertise, our lid is designed to complement the brilliance of your Ableton Push 3.

The Ableton Push 3 is more than just a controller; it's a gateway to a world of limitless creativity. Its seamless integration with Ableton Live empowers you to bring your musical ideas to life with unparalleled ease. However, with great innovation comes the responsibility to protect your investment from the challenges of the studio and the stage.

This Decksaver cover is built to provide an impenetrable shield against dust, dirt, liquid spills, and accidental knocks. Made from premium-quality polycarbonate (to our own unique recipe), this cover ensures your Ableton Push 3 remains immaculate and free from wear and tear, so you can focus solely on the creative duties of making music.

Designed with precision, the custom-fit mould embraces your Push 3 like a second skin. Whether you're performing live, producing in the studio, or taking your music on the road, our cover ensures your creative flow remains uninterrupted.

As pioneers in protective solutions for musical gear, Decksaver takes immense pride in our stringent quality standards. The design for the Ableton Push 3 Decksaver cover has been rigorously tested to meet the highest level of fit, durability and reliability, ensuring it withstands the demands of your musical journey.

Join the league of top-tier music producers and DJs who trust Decksaver to safeguard their musical instruments. Elevate your music production experience with the confidence that your Ableton Push 3 is cocooned in some of the finest protection available.

Seize the opportunity to explore new sonic dimensions and compose your musical opus without worry. Choose Decksaver, choose excellence, and choose to take your music production to new heights with the Ableton Push 3 Decksaver cover.

Your journey to sonic greatness starts here!

Dimensions

Weight: 0.7 kg
Length: 38.8 cm
Width: 32.5 cm
Height: 4.5 cm

Material: Smoked clear polycarbonate.

Notes: Cult vintage drum machines like Roland's TR-909 are practically museum pieces, especially in pristine condition. For one to come to any harm doesn't bear thinking about! The studio elements of dust, smoke and liquid have taken many a good 909 down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, the TR-909 can sit ready for operation.

These beautiful machines are without doubt an investment worth protecting as prices continue to soar.

Notes: Our Novation Peak Cover is the first Decksaver to feature Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit, the Solid State Logic UC1 can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, on the road and onstage.

Notes: The SSL SiX may be a compact desktop mixing console, but it packs a real punch and is feature laden whether at a live gig, in the studio or on location.

Decksaver's professional mixer range of mixer covers gives audio engineers peace of mind whatever the scenario.

Designed and engineered in the UK specifically for the analogue SiX, our smoked clear Decksaver cover is manufactured from polycarbonate, a tough transparent plastic made to our own specification.

Each design is rigorously tested before it carries our name so you can rest assured.

Shields faders, buttons, knobs and lights from dust, liquid and accidental impact whilst keeping cables and settings intact.

Recommended by the industry, used by professionals.

Dimensions

Weight: 0.65kg
Length: 32.4cm
Width: 27.5cm
Height: 9.04cm

Material: Smoked clear polycarbonate.

Notes: In 2021, Behringer released one of their most anticipated products - the Behringer RD-9. Inspired by the legendary Roland TR-909 drum machine, the machine boasts 58 buttons and 33 knobs, perfect for crafting your drum sequences to absolute excellence.

Commonly seen in producers' studios when they are crafting beats and instrumentals, it is a highly used piece of equipment within the music industry. To protect those creative ideas evolving from your drum machine, we designed and manufactured a hard shell protective cover!

The Decksaver Behringer RD-9 cover is custom-moulded to perfectly fit whilst accommodating cables, meaning the RD-9 can sit ready for operation while being fully protected. This super durable polycarbonate shell features extreme durability and offers the highest degree of protection.

You will never have to worry about your Behringer RD-9 getting damaged with your Decksaver cover!

Weight: 1kg
Length: 48.2cm
Width: 26.1cm
Height: 4cm

Material: Smoked clear polycarbonate.