Back catalogue: All genres

Notes: AIAIAI's affordable XE range might just offer the best value studio headphones around. Balance S01 drivers and comfortable E04 ear pads are paired with a slim headband for great sound at a reasonable price.

Supplier's Notes:
Modular studio headphones.

Balanced and detailed sound
Enhanced comfort over-ear cushions
High sound isolation
Weighing only 190g
Modular headphone design

Modular studio headphones with highly detailed sound and full bass extension, balanced for music production. Comfortable PU leather over-ear earpads provide high isolation, reducing surrounding noise when creating on the go. Weighing only 190g for enhanced comfort over extended periods of time.

Balanced detailed sound

Critically acclaimed sound stage specifically designed for studio use with a clear and highly detailed sound representation.

The speaker unit contains a bio-cellulose diaphragm made from bacterial cellulose, an organic compound grown using certain types of bacteria. The precision-grown diaphragm from bio-cellulose is stiffer, lighter, and stronger than regular PET speaker units, allowing the sound-producing diaphragm to vibrate without the levels of distortion found in other speakers.

Each of these qualities results in more accurate and detailed sound from the speaker with the ability to retain clarity of sound at high volumes.

With a minimal and lightweight construction of only 190g, the TMA-2 Studio XE is ideal for the flexible, versatile and dynamic workflow of modern music makers.

Lightweight & comfortable

High grade over-ear memory foam cushions covered in resilient and soft PU leather, for enhanced comfort during long creation sessions or live performances. The over-ear cushion design provides high sound isolation when creating in noisy environments.

Headband made from high grade nylon combined with durable PU leather earpads, results in a total headphone weight of only 190g.

In the box

S01 . Balanced sound - Bio-diaphragm

Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

H01 . Slim - PU foam

Slim and lightweight polycarbonate headband with soft, durable PU foam padding.

E04 . Over ear - PU leather

Soft over-ear memory foam cushions covered with PU leather. The thickness and materials provide better comfort and excellent isolation. Adding a low end boost for a warmer sound with powerful dynamics.

C05 . Straight - 1.5m - Adapter

Straight black 1.5m thermo plastic cable with soft touch surface. Comes with 1/4 to 1/8 screw-on adapter.

Headphones for life

As a music creator, you need headphones that can keep up with your evolving needs and styles. These TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

By investing in this modular headphone system, you're not just buying headphones - you're investing in a long-term solution that evolves with your music. This reduces electronic waste while ensuring that you always have the optimal headphones just for you.

Diaphragm: Bio-cellulose
Driver diameter: 40 mm
Impedance: 32 Ohm
Magnet: High-grade Neodymium
Max power: 100 mW
Rated power: 40 mW
Resonance freq: 80 Hz

Notes: The model 230 double support is designed to house two large pieces of equipment, with the ability to improve the operating position of both.

In each position of the bracket, a 30cm piece of equipment can be placed. deep, such as Maschine MK3 and Maschine Jam.

This double support in turn allows it to be used as two simple supports. Simply unscrew the front half from the back.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The width is adjustable according to the length of the rods that join both halves.

The support includes rubber feet so that it does not scratch or slip and the screws for its assembly.

Notes: This stand its part of a new concept in COVERUP. With differents parts, you can use to put on multiple synths, including big devices, until now, not possible with the other stands.

You can configure your setup with you like more, with two big devices, or three medium devices. Easy to ensamble, very light to move from your studio to live. Just you need 1 minute to arm and start to playing.

Your setup of synthesizers and studio equipment can change permanently and with it also the position on the work table.

Taking this into account, CoverUp developed a 3-level support, which can be set up in different ways depending on the number of machines that we are going to place and their size.

In the triple stand configuration (using all 4 parts), 3 20cm machines can be placed. deep and a maximum height of 7cm.

This space is enough for much of the hardware available today.

The triple bracket parts are assembled with screws (included) using a universal socket that holds them together firmly.

In turn each part can be used as a simple support. It is only enough to separate the parts by removing the screws and use each part as it suits us.

Each part has rubber feet underneath, so that the support does not slip and is firmly supported.

Both halves of the triple support are linked with wooden rods at various points to give it lateral stability.

The design contemplates space for the rear connectors of each equipment, so that none of them are obstructed by the support.

Measures:
Depth: 58cm
Height: 41cm
Width: 34cm

Notes: M4U eX is a compact and yet extremely powerful USB 3.0 MIDI interface with 8 MIDI ports.

Each of the 8 ports can either be used as a MIDI input or as a MIDI output, replacing not only traditional MIDI interfaces like it's popular predecessor models with 4 inputs and 4 outputs, but providing also other possible configurations. For instance, you can use up to 8 outputs at a time or up to 8 inputs, or 6 outputs and 2 inputs - to name some examples. And the best feature? This is all handled automatically, simply based on your connection to other MIDI inputs or MIDI outputs and each automatic input / output configuration is displayed via colored LEDs on the front panel.

M4U eX is not only one of the worlds first USB 3.0 MIDI interfaces, it also includes a USB 3.0 hub with 3 connectors for other USB equipment like software dongles or USB keyboards and others. This can literally turn this device into the central hub for your MIDI and USB musical instrument devices. The class compliant device can be bus powered or if needed for other USB devices, be powered by the included DC power supply.

The Windows 7 / 8.1 / 10 / 11 and macOS compatible device provides not only perfect timing and the highest low latency performance of any MIDI interface in it's class on the market today, it can even be used fully standalone without a computer: different operation modes allow you to route input to output signals, merge MIDI signals or use M4U eX as a MIDI thru box. These modes can be selected with the push of a button when needed.

If the 8 ports are not enough, you can connect multiple units to the computer at one time - plus there is also the larger M8U eX available, with 16 ports.

Features/specifications

USB 3.0 MIDI interface
100% class compliant, works without the installation of a driver
USB bus powered
8 MIDI ports, 4 on the front and 4 on the back
Automatic input and output detection, each port works as a MIDI input or MIDI output
Standalone operation possible
Can be used as MIDI Thru box in standalone mode to send one MIDI signal to 7 outputs
Can be used as MIDI merger in standalone mode to merge 7 MIDI signals to a single output
3-port USB 3.0 hub with external 5V DC power supply to power USB devices (power supply included)
Multiple units can be used with one computer at a time
Downwards compatible to USB 2.0 with a USB 2.0 legacy mode
Optional ESI MIDI Port driver for multi device / multi client operation under Windows available
Dimensions roughly 17.5cm x 12.0cm x 4.5cm

Notes: Connect your music with the world

The first audio interface designed for sharing

Today's mobile devices make it easier than ever to share your music with the world. From Instagram live-streams to YouTube videos, SoundCloud playlists and more, social media and smartphones have become a key aspect of how many musicians get heard and connect with fans.

iRig Stream makes it easier than ever to share, letting you connect instruments, mixers and more to your iPhone, iPad, Android device and Mac/PC, with convenient features designed just for use on today's most popular platforms. Whether it's mono or stereo, live playing or an existing mix, iRig Stream gets you connected to all your favourite apps, so you can start connecting with listeners instantly.

Features

Stereo line input over RCA connectors
Audio level LED indicators to dial in the right gain fast
Up to 48kHz / 24bit resolution for crystal clear sound
Pre-mixes audio sources down to stereo or mono
Loop-back mixes incoming signals with your device's audio
Headphone out with integrated mic input to talk over your music
Powered by your device for use on the go
Works with all your favourite apps
Custom ASIO driver for superior performance on Windows machines

Mix and stream up to 3 audio sources

iRig Stream makes it easy to connect all your audio sources and route them to a streaming or recording app. Send the digital output of your smartphone, tablet or laptop into iRig Stream, mix it with external audio sources like mixers, DJ decks, keyboards and more. Add your voice from earbuds (or an iRig Mic) and send all 3 signals back to your device to popular apps like Instagram, or just your built-in camera app.

Get connected

iRig Stream makes it easier than ever to connect. With USB, USB-C and Lightning cables right in the box, it plugs into all the latest iPhones, iPads, and Android devices, as well as Mac & PC - even the latest devices.

2 line-level RCA inputs are perfect to connect DJ and multi-channel mixers, but are also great for keyboards, synth & drum machine setups, and more. Whether you're looking to stream your DJ set, record band practice, jam along with your favourite song, or even host a podcast, iRig Stream lets you connect a massive range of gear.

Sound your best

iRig Stream offers 24-bit, 48 kHz A/D and D/A converters to ensure a clean, professional signal regardless of the platform you'll wind up on. And adjustable input gain and easy-to-read level indicators let you dial in the right sound level instantly.

Make your voice heard

iRig Stream offers a unique headphone / microphone jack, wired just like your smartphone, so you can listen and talk over the stereo input simultaneously.

The mic input is mixed into the stereo inputs, to ensure it works with any app, and offers adjustable volume. Best of all, it works with most headphones with a built-in mic*, and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre, giving you a wide range of options for any situation.

Designed for apps

If you're ever tried streaming or sharing audio on social media, you know many apps only support mono signals - so iRig Stream offers a mono/stereo switch to compensate. Stereo passes both inputs as left & right channels, and mono mixes them together to a single channel, ensuring you won't lose anything panned to one side.

Comprehensive compatibility

iRig Stream works with any app that records or streams audio or video, so you'll never stop finding new ways to use it. To get you started, it includes iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high quality audio and video recording app. Record, trim, edit and share,
right from your device.

Built to go and to last
iRig Stream is compact enough to slip into the pocket of your backpack, so it's ideal for use on the go. It runs off your device's battery, so there's no batteries to run out mid-show, but can also charge your device with an optional power supply, to keep you going for extended sessions.

Specs

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz
Power: USB bus powered or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream charge the connected iOS lightning device.
Metering: 3x LEDs
Device Connection: mini-DIN

Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10dBV
Input Impedance: 16.5kOhms
Frequency Response: 20 Hz - 20kHz

Headset/Phones
Connector: 1/8" TRRS jack (CTIA wiring standard)
Supply voltage: > 2,5V
Microphone gain: Adjustable with numbered thumbwheel
Frequency Response: 20 Hz - 20kHz
Headphone Level control: numbered thumbwheel
Headphone Output Power: 100mW into 50Ohms

Package includes
iRig Stream interface
Lightning to mini-DIN connection cable with charging features (60cm/23.62")
USB C-Type to mini-DIN connection cable (60cm/23.62")
USB A-Type to mini-DIN connection cable (60cm/23.62")

Dimensions
Size: 105.5mm/4.15" x 44.5mm/1.75" x 24mm/0.94"
Weight: 65g/2.29oz

Compatibility

iOS Devices

Made for: iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (6th generation), iPad (5th generation).
Also compatible with all newer iPhone, iPad and iPod touch models.

Computers
Macr: macOSr 10.6 or later. One free USB port.
Windowsr: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG mini-DIN cable (sold separately) is required.

Notes: The new CTRL Case DDJ-REV5 is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-REV5 controller. Made of lightweight and rigid Durashock moulded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the jog wheels, knobs and faders.

Fits

Pioneer DDJ-REV5

Basics

Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
Comfortable, rivet reinforced carrying handles and shoulder strap
Compatible with Decksaver cover

Specs

Outer measures: 83 x 46 x 14 cm
Inner measures: 73 x 37 x 11 cm
Weight: 3 kg

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Building on the reputation of its award-winning predecessors, the Erisr Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 80W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 5 to reach down to an astonishing 48 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

5.25-inch woven composite low-frequency driver
1-inch, ultra-low mass, silk-dome, high frequency driver
Crossover Frequency, 3.5 kHz
100- x 60- EBM waveguide provides a sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
80W, Class AB dual amplification
48 Hz to 20 kHz frequency response
102 dB Peak SPL (@ 1 meter)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (+/-6 dB, center 10 kHz, continuously variable)
Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs

Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)

Set up your studio monitors for your room.

Erisr Studio 5 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonus studio monitors, the Eris Studio 5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10kO

Performance

Peak SPL: 102 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 11.50 x 8.00 x 8.80 in

Product depth: 8.78" (22.3 cm)
Product height: 11.5" (29.2 cm)
Product width: 8" (20.32 cm)

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring the stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with RODE's industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

NT1 Signature Series User Guide

Discover everything you need to know about using your NT1 Signature Series studio condenser microphone in this comprehensive user guide, including how to attach and mount your microphone, pop filter and shock mount, and how to connect and power your NT1 Signature Series.

Compatible Accessories
XLR Cable
PSA+1
SM6

Specifications
Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100?
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection; 3-pin XLR

Weight (grams): 313

Dimensions (millimetres)

Length: 52
Width: 52
Height: 189


What's in the Box

1 x NT1 Signature Series
1 x SM6
1 x XLR Cable

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer PLX-CRSS12 turntable? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer PLX-CRSS12 turntable, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,35 kg / 5.17 lbs
Outer Dimensions (W x H x D): 52.5 x 43.5 x 21.0 cm | 20.7 x 17.1 x 8.3 inch
Inner Dimensions (W x H x D): 45.8 x 35.8 x 17.0 cm | 18.0 x 14.1 x 6.7 inch
Material: Durashock moulded EVA foam

Protection:

Water repellent laminated nylon exterior
Removable top-bottom egg crate foam prevent damage from vibrations and shocks
Black soft fleece interior

Extras

Convenient carry handles and shoulder strap
Easy grip zipper pulls

Fits

Pioneer PLX-CRSS12 turntable

Notes: Want to take more of your gear with you when travelling? UDG presents the UDG Creator Wheeled MIDI Controller Case Black 22" to bring you the perfect solution for flying and travelling with MIDI controller, laptop and any additional hardware.

UDG Creator Wheeled MIDI Controller Case Black 22" means more equipment with no compromise on convenience and protection. Featuring protective padded compartments and padded secure strap. It's the only trolley gear bag available that is large enough to house controllers such as the Pioneer DDJ-FLX4/ REV1/ 200/ 400/ SB3 or NI Traktor S3/ S2 MK3/ S4 MK3. Made of tough, durable black exterior & interior material, sturdy in-line wheels for easy transport and mobility with paddings in all the right places for the ultimate carrier of your valuable equipment.

Specifications
Colour: Black
Weight: 3,90 kg / 8.58 lbs
Outer Dimensions (W x H x D): 67.6 x 43.0 x 25.0 cm | 26.6 x 16.9 x 9.8 inch
Inner Dimensions (W x H x D): 56.0 x 36.0 x 10.5 cm | 22.0 x 14.2 x 4.1 inch
Material: Water resistant Ballistic Nylon 1680D

Protection:

Padded compartment for controller or mixer with padded secure strap
Padded compartment for up to 17" laptop
Padded pocket for up to 9.7" tablet and small accessories
Smooth rolling in-line wheels with high quality in-line skate bearings

Extras

Includes removable paddings to fit various controllers
Rear-access pocket for magazine/document
Retractable handle with 2 stage internal trolley system
Additional cable pouch
Soft padded carry handle

Fits:

Pioneer DDJ-FLX4, DDJ-REV1, DDJ-200, DDJ-400, DDJ-SB3, DDJ-RB, DDJ-SB2, DDJ-SR2, DDJ-RR, DJS-1000,
CDJ-3000, DJM-900NXS2,
NI Traktor S3, S2 MK3, S4 MK3, S5, S4 MK2, S2 MK2, Komplete Kontrol A25, Maschine Studio,
Denon DJ Prime Go, MC3000, MC4000, MC6000 MK2,
Reloop Elite, Beatmix 2 MK2, Beatpad MK2, Terminal Mix 4/ 8,
Akai MPC Live II, APC 40, MPK 25,
Novation AFX, Peak, Nocturn 25, Remote SL MK II, Zero SL MK II,
Numark Mixtrack Platinum FX, Mixtrack Pro FX, Mixtrack, Mixtrack II/ III, Mixdeck Express, Mixtrack Platinum, Mixtrack Pro/ II/ III, NV II,
American Audio Encore 2000, VMS4, VMS5,
Roland TR-808, TR-909, DJ-707M, TR-8, TR-8S, DJ-202, System-1,
Rane Twelve, Seventy-Two, Seventy,
Gemini G2V, G4V, GMX,
M-Audio Exponent,
Hercules DJControl Inpulse 500 DJControl Jogvision, DJControl Inpulse 300,
Korg Minilogue XD,
up to 17" laptop, up to 9.7" tablet, audio interface, books and magazines

Notes: UDG have further fined-tuned what was already a great design concept of a flight case into one specially for the most discerning creative performers. Constructed from aluminium thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam, which allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for Ableton Push 3 and creating another slot beside for cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Case Ableton Push 3 is designed to keep your Ableton Push 3 protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your gear safe.

Specifications

Colour: Black
Weight: 5,50 kg / 12.1 lbs
Outer Dimensions (W x H x D): 39.0 x 50.0 x 16.5 cm | 15.3 x 19.7 x 6.5 inch
Inner Dimensions (W x H x D): 38.0 x 49.0 x 15.5 cm | 14.9 x 19.3 x 6.1 inch
Material: Aluminium

Protection: Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock
Rubber feet at the bottom for support in standing

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers

Fits

Ableton Push 3, power adapter, extra cables

Notes: The tiny but mighty Eurorack power supply. Winterbloom's love letter to DIYers is perfect for custom cases.

Micronova is a miniature 100x30mm power supply with a big soul. It can provide up to 18W of power for your modules and multiple units can be easily daisy chained to power larger systems.

Despite being adorably small, Micronova provides lots of flexibility for custom case builds. It can be powered through an attached DC barrel jack, screw terminals, or through an optional front entry panel.

Micronova is equipped with two Eurorack power headers that can be expanded using a busboard or flying bus cable.

Micronova also has critical safety features including reverse polarity protection, a resettable polyfuse, and over-current shutdown.

A suitable AC-DC power adapter is required.

A tiny 100mm x 30mm board with M3 mounting holes
Provides +12V @ 1A, -12V @ 300mA, and +5V @ 500mA
Includes two 16-pin Eurorack power headers
Requires a 15V to 20V center positive DC power supply
Multiple units can be daisy chained
Reverse-polarity, over-current, and over-temperature protection

Review: ***B-STOCK: Sleeve damaged but otherwise in excellent condition***


Made and released way back in 1958, Somethin' Else is a classic jazz album by the American alto saxophonist Cannonball Adderley, notably his only ever album for the esteemed Blue Note label. It famously hears Adderley enlist the help of trumpeter Miles Davis as one of its sidemen, and this was an ongoing relationship that later paved the way for popular jazz as a whole; without Somethin' Else, we wouldn't have Kind Of Blue, for which Adderley would contribute his sax playing just a year later. Though it is a testament to the unity of two great core musicians, we also hear the piano stylings of Hank Jones, bassist Sam Jones and drummer Art Blakey.

Review: Arther Baker's Dance Masters series continues, as the spotlight turns to another remix legend: one of the originators of the form, John Luongo. Regarded as one of the most influential DJs and mixers of his day, Luongo's many credits include remixes of Jackie Moore's 'This Time Baby', 'Vertigo / Relight My Fire' by Dan Hartman and Patti Labelle's 'Music Is My Way Of Life'. Luongo also went on to establish a production career in his own right, and his legacy is more than cemented here on this retrospective comp from Demon. This box set compiles his most striking tracks in a sixc LP compilation, as well as: a 16-page booklet; an in-depth essay from Alexis Petridis; a foreword by Arthur Baker and a rare photo album from Luongo's personal collection.

Review: ***B-STOCK: Slight box damage, otherwise in perfect condition***


A new special edition of The Beatles' Revolver comes courtesy of Apple, the original label on which the fab four released some of their most seminal works. Featuring a new mix and master by Giles Martin and Sam Okell, this version contains yet another 100-page book with a foreword by Paul McCartney and an unlikely essay by Questlove of The Roots.

Review: Dave Clarke's Red Series remains a vital benchmark in the evolution of UK techno. Released between 1993 and 1996, the three-volume run even managed to brush the UK top 40 back in the good old days when anything felt possible. Tracks like 'Wisdom To The Wise' will forever be etched in the make up of techno, and for very good reason. Now the whole series is being given a lavish reissue treatment which takes in all the original releases along with additional discs of rare, archival tracks and remixes, all bundled up in a box with a booklet and autographed by the Baron himself.

Review: While they might be best known for one mega-hit, Pete Burns' Dead Or Alive were much more than 'You Spin Me Round'. Emerging just ahead of the new romantics era, their embrace of synth-pop collided with an antagonistic spirit rooted in punk. Capped off with the flamboyant theatrics of Burns' voice and appearance, and you have one of the all-time greats of the era, amply celebrated on this singles collection which features some of the killer extended mixes and alternative versions that make their 12"s as essential as their LPs. At 180 tracks spread over 27 discs, there's a lot to chew on - much more than just a one-hit wonder.

Review: Die Gestalten's commitment to gnarly underground electro continues apace with this triple-pack monster from the shadowy figure. As ever there's a steely, almost industrial focus to the sound, where machine funk goes heavy on the machine. There is space for some melodic warmth as well, such as the cosy lead lines cresting over the top of 'Der Sucher' and the artfully modulated live version of 'Traenen'. But even in these more approachable moments there's a sense of robotic detachment - this is electro in the purist, icy sense of the word. If you thirst for a large dose of truly underground gear from a lone wolf, this payload will have you body popping for days.

Review: Part of the early 80s Sheffield avant-garde scene, In The Nursery was formed at the turn of the decade between twin brothers Nigel and Klive and Humberstone. As living mirror-images, they knew likeness first hand; it seems fitting that they would embrace the imitative, reproductive spirit of industrial music. Under the shared moniker, they would subvert the prevailing mood, agonising grotesque military connotations of an uncertain future by working in a new style, "martial electronica". As heard on this latest set of Recordings made between 1981-1999, their sound was not totally tinny or robotic, making use of cinematic and Romantic tropes in near equal measure to futuristic shock-horrors. From spectacular edge-of-your-seaters ('Stone Souls') to operatic apogees ('Listen') and modish drum machine workouts ('A To I'), this is a comprehensive compilation, just as suited to the spectacular screen as for the auratic DJ set - pick your poison.

Review: Knitting Factory and Partisan Records share the sixth instalment of the much-anticipated vinyl reissue box-sets from the Fela Kuti catalog. Box #6 is curated by actor, producer, DJ, rapper and singer, Idris Elba (aka. DJ Big Driis). Limited to an edition of 5,000 worldwide, this one includes a 24-page booklet with lyrics, commentaries by Afrobeat historian Chris May, together with some never-before-seen photos, not to mention a 16x24" poster designed by Lemi Ghariokwu, the creative force behind many of Fela's greatest album covers. Previous curators include Chris Martin, Erykah Badu, Ginger Baker, Brian Eno, and Questlove.