100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: All Genres

Startseite  Back Catalogue  

All Genres

Options
Artikel 1 bis 50 von 1,177 auf Seite 1 von 24 anzeigen
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALLE
1  2  3  ...  24  »
ACL EVZ1-104 Eurorack Module Case 6U 104HP With Kazu 2
Cat: 805630 Rel: 14 Dec 20
 
104HP Eurorack module case with Kazu 2
Notes: It is made of metal and gets a noble vintage look thanks to beautiful wooden side parts. This 6U case is flat and offers two rows of 104 HP for the installation of modules.

The integrated 4 HP wide KAZU II power solution with switching PSU and EVE1 busboard works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected.

The KAZU II PSU solution is of high quality and delivers a constant current without getting hot.

Switching power supply, developed especially for modular systems.

Minimal voltage peaks and interferences. The result: An extremely low noise floor and very honest sound.

+12 V - Regulated, filtered, less than 2 mV fluctuations and noise at full capacity, typically 1,5 mV.

-12 V - Regulated, filtered, less than 2 mV fluctuations and noise at full capacity, typically 1,5 mV.

Very little heating, even at high loads

Overvoltage and short-circuit protection

Primary voltage: 100 - 240 V

Maximum continuous power:
1500 mA at +12 V
1500 mA at -12 V

An external power supply (15 V DC) is included in delivery.
Read more
MRP:$597.87 SAVE 32%
 1 in stock $404.24
ACL EVZ1-84 Eurorack Module Case 6U 84HP With Kazu 2
Cat: 805627 Rel: 14 Dec 20
 
84HP Eurorack module case with Kazu 2
Notes: ACL - EVZ1-84 Eurorack Case 6U 84HP with Kazu 2

It is made of metal and gets a noble vintage look thanks to beautiful wooden side parts. This 6U case is flat and offers two rows of 84 HP for the installation of modules.

The integrated 4 HP wide KAZU II power solution with switching PSU and EVE1 busboard works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected.

The KAZU II PSU solution is of high quality and delivers a constant current without getting hot.

Switching power supply, developed especially for modular systems.

Minimal voltage peaks and interferences. The result: An extremely low noise floor and very honest sound.

+12 V - Regulated, filtered, less than 2 mV fluctuations and noise at full capacity, typically 1,5 mV.

-12 V - Regulated, filtered, less than 2 mV fluctuations and noise at full capacity, typically 1,5 mV.

Very little heating, even at high loads

Overvoltage and short-circuit protection

Primary voltage: 100 - 240 V

Maximum continuous power:
1500 mA at +12 V
1500 mA at -12 V

An external power supply (15 V DC) is included in delivery.
Read more
MRP:$516.34 SAVE 34%
 1 in stock $339.69
Cheetah Funki LED Party Set Containing Mini Disco Lights
Cat: 806786 Rel: 23 Dec 20
 
Light effects unit containing disco lights
Notes: Battery operated disco light set including a mini crystal disco ball, mini multi-colour fuzz light and mini cosmo ball with built-in rotator. All units require 3x AA batteries (not included). The products feature long life LEDs. Ideal for Parties and childrens bedrooms etc.
Read more
 1 in stock $26.03
Cheetah Mini 4 LED USB Disco Ball With Android Type Connector
Cat: 806805 Rel: 23 Dec 20
 
Mini disco ball with LED lights & phone connector
Notes: This Portable Mini Disco Ball is supplied with 1 connector for Android devices (G017KUA). Simply use the connection required and plug into a phone, tablet or computer and you are good to go! This RGB product works on a ""Sound to Light"" function so when the tunes start the Disco Ball starts to work (automatically moving / sound active / flash), the disco ball is perfect for celebrations, parties or simply to add a bit of disco sparkle when listening to music.

Specifications:

Product Dimensions (mm): 43x41x41
Net weight (kg): 0.03
Beam angle (deg): 120
Connector Type: Android
Power (W): 4
Voltage (V): 5 DC
Read more
 1 in stock $7.92
Cheetah Mini 4 LED USB Disco Ball With Apple Type Connector
Cat: 806801 Rel: 23 Dec 20
 
Mini disco ball with LED lights & phone connector
Notes: This Portable Mini Disco Ball is supplied with 1 connector for Apple devices (G017KUA). Simply use the connection required and plug into a phone, tablet or computer and you are good to go! This RGB product works on a ""Sound to Light"" function so when the tunes start the Disco Ball starts to work (automatically moving / sound active / flash), the disco ball is perfect for celebrations, parties or simply to add a bit of disco sparkle when listening to music.

Specifications:

Product Dimensions (mm): 43x41x41
Net weight (kg): 0.03
Beam angle (deg): 120
Connector Type: Apple
Light Output Colour: RGB
Power (W): 4
Voltage (V): 5 DC


Read more
 2 in stock $7.92
Citronic CM25 Studio Condenser Microphone
Citronic CM25 Studio Condenser Microphone (studio condenser microphone)
Cat: 778591 Rel: 08 Jan 21
 
large diaphragm condenser microphone
Notes: Superb value from this entry-level studio-quality mic, ideal for vocal recording. Includes isolating mount, pop shield, XLR cable and sturdy metal box for transport and storage.

Supplier's Notes:
Large diaphragm condenser microphone with cardioid polar response pattern for accurate reproduction of vocals and instruments in a recording or broadcast studio. All metal construction with a bespoke shock-mount and magnetic pop-shield included, ready to mount to a standard microphone stand or boom arm. Connection via XLR for high quality balanced audio output and phantom power from a mixing console or dedicated phantom power supply. Supplied with a 3m balanced XLR lead in a fitted aluminium transit case.

The box for this item contains :

CM25 condenser microphone
Fitted shock-mount cradle
Magnetic pop shield
3m balanced XLR lead
Aluminium transit case

Power supply: 30 - 48V phantom power (via XLR)
Construction: Zinc alloy body and steel grille
Capsule: 25mm: O nickel sputtered diaphragm
Output impedance: 2.2k Ohm
S/N ratio: 68dB (A-weighted)
SPL max.120dB (1kHz)
Lead length: 3m
Read more
MRP:$93.76 SAVE 29%
 4 in stock $66.80
Click for better price!
or call +44 20 7424 1960
quote 778591
Decksaver Akai Pro MPK Mini MK3 Keyboard Controller Light Edition Cover
Cat: 801861 Rel: 21 Dec 20
 
Polycarbonate shell cover for Akai Pro MPK Mini MK3 Keyboard Controller - Light Edition
Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Akai Pro MPK Mini MK3 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.
Read more
 3 in stock $30.29
Decksaver Arturia Keystep 37 Keyboard Controller Light Edition Cover
Cat: 801879 Rel: 18 Dec 20
 
Polycarbonate shell cover for Arturia Keystep 37 Keyboard Controller
Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Arturia Keystep 37 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.
Read more
 3 in stock $34.83
Decksaver Arturia Keystep Pro Keyboard Controller Cover
Cat: 801875 Rel: 18 Dec 20
 
Polycarbonate shell cover for Arturia Keystep Pro Keyboard Controller
Notes: Custom engineered in the UK for the Arturia Keystep Pro Keyboard Controller, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 5 in stock $47.54
Click for better price!
or call +44 20 7424 1960
quote 801875
Decksaver Blackmagic Design ATEM Mini, ATEM Mini Pro & ATEM Mini Pro ISO Cover
Cat: 801858 Rel: 21 Dec 20
 
Polucarbonate shell cover for Blackmagic Design ATEM Mini, ATEM Mini Pro & ATEM Mini Pro ISO
Notes: Custom engineered in the UK for the Blackmagic Design ATEM Mini, ATEM Mini Pro & ATEM Mini Pro, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $35.95
Decksaver Elektron Digitone Keys Synthesiser Cover
Cat: 801883 Rel: 21 Dec 20
 
Polycarbonate shell for Elektron Digitone Keys Synthesiser
Notes: Custom engineered in the UK for the Elektron Digitone Keys Synthesiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $58.88
Click for better price!
or call +44 20 7424 1960
quote 801883
Decksaver Empress Effects Zoia Effects Pedal Cover
Cat: 801888 Rel: 21 Dec 20
 
Polycarbonate shell cover for Empress Effects Zoia Effects Pedal
Notes: Custom engineered in the UK for the Empress Effects Zoia Effects Pedal, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $30.53
Decksaver Pioneer DJ Toraiz Squid Multitrack Sequencer Cover
Cat: 801848 Rel: 21 Dec 20
 
Polycarbonate shell cover for Pioneer DJ Toraiz Squid Multitrack Sequencer
Notes: Custom engineered in the UK for the Pioneer DJ Toraiz Squid Multitrack Sequencer, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $60.05
Click for better price!
or call +44 20 7424 1960
quote 801848
Decksaver Sequential Pro 3 Synthesiser Cover
Cat: 801881 Rel: 21 Dec 20
 
Polycarbonate shell cover for Sequential Pro 3 Synthesiser
Notes: Custom engineered in the UK for the Sequential Pro 3 Synthesiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $54.34
Click for better price!
or call +44 20 7424 1960
quote 801881
Decksaver Tasty Chips GR-1 Synthesiser Cover
Cat: 801886 Rel: 21 Dec 20
 
Polycarbonate shell cover for Tasty Chips GR-1 Syntheiser
Notes: Custom engineered in the UK for the Tasty Chips GR-1 Syntheiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 4 in stock $47.06
Click for better price!
or call +44 20 7424 1960
quote 801886
Endorphin.es Trippy Cables Set Of 13 Patch Cables
Cat: 805633 Rel: 14 Dec 20
 
Set of 13 patch cables
Notes: Small set of 3.5 mm patch cables (mono). Shielded, gold plated pins, TPE isolation.

4x 15 cm red

3x 30 cm black

3x 50 cm red

3x 50 cm black

Comes with 1 extra green 80cm cable
Read more
MRP:$39.41 SAVE 17%
 1 in stock $32.83
Endorphin.es Trippy Cables Set Of 6 Patch Cables
Cat: 805637 Rel: 14 Dec 20
 
Set of 6 patch cables
Notes: Pack of 6 patchcables (mono). Shielded, gold plated pins, TPE isolation.

15 cm Red x 2

30 cm Black x 2

50 cm Red x 1

50 cm Black x 1

Comes with 1 extra green 80cm cable
Read more
MRP:$20.38 SAVE 11%
 1 in stock $18.11
Eowave Silky 50 Angular Braided Patch Cables (50cm, pack of 5)
Cat: 802486 Rel: 30 Dec 20
 
Pack of 5 braided patch cables
MRP:$16.31 SAVE 17%
 9 in stock $13.57
FX LAB 4-Way LED Crystal Pod Light With Built In Sound To Light Control
Cat: 805273 Rel: 14 Dec 20
 
4-way LED crystal pod light
Notes: A 4-Way LED Crystal Pod light with built in sound to light control .The effect features speed control, sensitivity control and an on/off switch contained in a central pod .Ideal for Personal or Professional use, powered by a AC/DC 5V 1A PSU.

Net weight: 3.1kg
Read more
 2 in stock $35.10
FX LAB 6-Way LED Crystal Pod Light With Built In Sound To Light Control
Cat: 805270 Rel: 14 Dec 20
 
6-way LED crystal pod light
Notes: A 6-Way LED Crystal Pod light with built in sound to light control .The effect features speed control, sensitivity control and an on/off switch contained in a central pod .Ideal for Personal or Professional use, powered by a AC/DC 5V 1A PSU.

Net weight: 4.1kg

Read more
 1 in stock $46.42
Click for better price!
or call +44 20 7424 1960
quote 805270
Michigan Synth Works XVI Desktop USB 16 Channel Fader Bank Surface Controller (black faceplate)
Notes: XVI Desktop is a 16 channel desktop control surface. Please note: This is NOT a 16n and is NOT compatible with any 16n related software.
Read more
MRP:$461.99 SAVE 34%
 1 in stock $304.59
Click for better price!
or call +44 20 7424 1960
quote 802365
Modal Electronics COBALT8M 8-Voice Desktop Extended Virtual-Analogue Synthesiser Module
Cat: 798108 Rel: 15 Dec 20
 
Extended virtual-analogue synthesiser
Notes: Desktop version of Modal's eight-voice virtual analogue powerhouse. Warm, punchy sound with complex oscillators, polyphonic sequencer modes and lots of hands-on control.

Supplier's Notes:
Building on the tradition of warm and punchy analogue-style synth sounds, conceived by legendary synthesisers from the past, COBALT8M unlocks the full creative potential of analogue waveforms. This powerful, inspiring instrument reinvents the aesthetics of analogue sounds and invites musicians, producers and sound designers to explore a new era of virtual-analogue synthesiser textures, far beyond the limits of its analogue forefathers.

On top of the innovative oscillator engine of COBALT8M, Morph Electronics added a new morphable 4-Pole Ladder Filter. Combined with Modal's unparalleled modulation options, an inspiring real-time / step sequencer, the energising arpeggiator, MPE, studio-quality effects and MODALapp integration, COBALT8M is the perfect synth for everyone who wants a versatile electronic music instrument to play vintage synth sounds and is eager to enter new sound dimensions.

Eight true polyphonic voices, housed in a sleek desktop and rack-mountable enclosure, tempt players to lay out wide string or rich synth pad chords, while a monophonic bass or lead patch, played with 64 oscillators can shake the walls of every stadium. And with the avant-garde sound forming features, every synth enthusiast can refine his performance with sounds that no other synthesiser is able to generate.

Polyphony: True 8 voice polyphonic

Oscillators: 64 high-resolution virtual-analog oscillators, up to 8 per voice
Two independent and self-contained oscillator groups with sine, pulse, triangle, sawtooth waveforms, 34 different algorithms including: complex analogue synthesis techniques, built-in crossmodulation (SYNC, RM, and many more), PWM, smooth morphing between VA waves, bit crushing, filtered noise.
Extended Oscillator Drift

Filter: Four-Pole Morphable Ladder Filter with Resonance and four switchable configurations
Resonance and Balanced Filter Modes

Modulation:
Three dedicated envelope generators for AMP, MOD and FILTER that can be accessed independently or all three simultaneously including negative (reverse) versions for MOD and FILTER ENVs
Three audio-rate LFO's with tempo sync (two poly, one global) with seven different shapes
Eight assignable modulation slots and four additional fixed modulation routings for common assignments with 12 modulation sources and 55 modulation destinations

Sequencer and Arpeggiator: Realtime sequencer with 512 notes with polyphonic mode and four recordable/editable parameter animations (Delay FX, LFO's, sequencer and arpeggiator can be either clocked internally or externally)
Built-In sophisticated programmable arpeggiator of 32 steps with rest capability with up to 2048 steps before repeating

FX: Three incredibly powerful independent and user-configurable stereo FX engines for Chorus, Phaser, Flanger (Pos), Flanger (Neg), Tremolo, LoFi, Rotary, Stereo Delay, Ping-Pong Delay, X-Over Delay and Reverb that can be arranged in any order

User Memory:
Patches: 500, all fully editable and ships with 300 factory programs
Sequencer: 100 sequences that can be linked to any patch for quickly loading arrangements
FX: 100 presets
Eight Quick Recall slots accessible from the panel for quickly loading your favourite patches

Controls and Performance:
13 switched encoders, 13 encoders, and 9 buttons
Four-axis joystick that can be assigned to a huge range of modulation destinations and virtually 'locked' when desired
Multiple keyboard modes (Mono, Poly, Unison 2, Unison 4, Unison 8, Stack 2 and Stack 4)
Glide/Portamento with both legato and staccato modes

Enclosure and Display:
Desktop-style steel and aluminium enclosure
Mounting brackets for 19" racks included
1.54-inch large OLED display for instant visual feedback at all times of playing/editing

Inputs and Outputs
2 x unbalanced 6.3 mm (1/4") TS outputs (L/R)
Stereo 6.3 mm (1/4") stereo headphone output
Stereo 3.5 mm (1/8") input with ability to route incoming audio through the FX
6.3 mm (1/4") sustain pedal jack
6.3 mm (1/4") expression pedal jack
3.5 mm (1/8") Analogue clock sync in and out (configured to the KORG / Teenage Engineering specification)
MIDI DIN in and out
Class-compliant MIDI over USB connection to host computer or tablet

Power: DC-9.0V - 1.5A centre-positive

Editor Software: Free MODALapp software editor for macOS, Windows, iOS and Android
MODALplugin to access COBALT8M within your Digital Audio Workstation (DAW), with VST3 and AU versions available

General:
Dimensions (L x W x H): 47 x 42 x 27cm (18.5 x 16.5 x 10.6 inches)
Weight: 2.1 kg (4.63 lbs)
Read more
MRP:$679.40 SAVE 20%
 More than 10 in stock $542.39
Click for better price!
or call +44 20 7424 1960
quote 798108
Mukatsuku Font Name Design Disk Stabilizer/Record Weight Stabilizer (510 gram) Plus Black & Gold Font Name Wooden Stabiliser Box
Cat: 792286 Rel: 16 Dec 20
 
Disc stabilizer with font name design logo + wooden box
Notes: Mukatsuku disc stabilizer/record turntable weight plus wooden branded box with magnetic lid both with the font name design -

No springs, clips or screws required, just place the Mukatsuku disc stabilizer over the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics/less distortion, bringing the record into more intimate contact with the platter.

Weight of each stabilizer is approx 510 grams and made from aluminium.

Bespoke Black & Gold Stabiliser Box with Mukatsuku Font Name Design Name On Magnetic Lid to house the Mukatsuku 510 Gram Stabilizer approx 85mm x 85mm height 55mm approx 150g in weight
Read more
 2 in stock $46.42
Mukatsuku Record Weight/Disc Stabilizer 420 Gram Edition (Juno exclusive) (record stabiliser) + Box
Cat: 806312 Rel: 15 Dec 20
 
Record weight/box with magnetic lid
Notes: Engraved version of the Mukatsuku disc stabilizer/record turntable weight house in a bespoke plywood box with magnetic lid to protect your tool. Great for DJ use in a club environment, or when recording from vinyl to digital. It may even help dished or skipping records in a bumpy club environment

No springs, clips or screws required, just place the Mukatsuku disc stabilizer over the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics/less distortion, bringing the record into more intimate contact with the platter.

Stabilizer (approx)
10mm height
83mm diameter
approx 420g weight

Box (approx)
100 mm square
20 mm deep

approx weight of box and stabilizer = 520 grams
Read more
 2 in stock $33.96
Mukatsuku Ring Record Weight/Disc Stabiliser/Stabilizer 380 Gram Edition Plus box
Cat: 806319 Rel: 15 Dec 20
 
Record weight/box
Notes: Engraved version of the Stainless Steel Ring Mukatsuku disc stabilizer / record turntable weight specially designed to be used for dinked 7 inch records with a 45 adapter in place plus a bespoke engraved plywood box with magnetic lid. Great for DJ use in a club , or when recording from vinyl to digital. It may even help dished or skipping records in a bumpy live environment

No springs, clips or screws required, just place the Mukatsuku disc stabilizer over the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics / less distortion, bringing the record into more intimate contact with the platter.

Stabilizer (approx)

10mm height
83mm diameter
approx 380g weight

Box
100 mm diameter
20 mm deep

Box plus ring weight approx 430 grams

Read more
 2 in stock $33.96
Mukatsuku Stabilizer Box To House The Mukatsuku 420 or 380 Ring  Edition Stabilizers
Cat: 806407 Rel: 15 Dec 20
 
Box for Mukatsuku 420/380 stabilizers
Notes: Bespoke engraved plywood box with magnetic lid to house the either Mukatsuku 420 flat or 380 ring disk/ record weights/ stabilizers.

Box
100 mm diameter
20 mm deep
Read more
 1 in stock $12.45
Sismo Tapbum Analogue Synthesiser
Sismo Tapbum Analogue Synthesiser (analogue synthesiser)
Cat: 806879 Rel: 30 Dec 20
 
Mini analogue synthesiser for creating rhythm/drum loops
Notes: Another quirky little instrument from Sismo, this time focusing on analogue drum synthesis. Basic wood block, bass drum and noise sounds, with a simple built-in step sequencer.

Supplier's Notes:
A small and curious analog tool for create your rhythm loops , include bass drums to make your studio pumping, metal noise and woodblocks. This is a remade of our traditional instrument from 2017 part of the collection Synths of the Month.

Specifications:
Polyphony: monophonic
Power source: 9-12 Volts DC (center positive)
Weight: 180g
Dimensions: 6cm(H) x 2,5cm(D) x 10,9cm(W)
Read more
MRP:$114.14 SAVE 17%
 5 in stock $95.10
Teenage Engineering OP-1 Protective Soft Case (black)
Cat: 803154 Rel: 15 Dec 20
 
Protective soft case for Teenage Engineering OP-1
Notes: Black protective soft case for the OP-1 in water repellent Cordura nylon. Custom moulded EVA foam inside for protection and perfect fit. Pocket in the back with zip closing for cables and smaller accessories. Detachable and adjustable shoulder strap in durable nylon webbing with Teenage Engineering custom hardware in aluminium. The case has a velcro patch and strap tunnel on the front for attaching the OP-Z soft case which can be bought separately.

Details:

Production country: China

Shell material: 100% Cordura nylon from South Korea

Lining material: 100% Polyester from China

Hardware material: 100% aluminium from China

Measurements: 32.5cm x 8.5cm x 2cm
Read more
MRP:$120.93 SAVE 17%
 2 in stock $100.77
Click for better price!
or call +44 20 7424 1960
quote 803154
Teenage Engineering OP-Z Protective Soft Case (black)
Teenage Engineering OP-Z Protective Soft Case (black) (sequencer & synthesiser soft case)
Cat: 803160 Rel: 21 Dec 20
 
Protective soft case for Teenage Engineering OP-Z
Notes: Black protective soft case for the OP-Z in water repellent Cordura nylon. EVA foam inside for protection and practical divider for storing cables and other smaller accessories. Detachable wrist strap in durable nylon webbing with Teenage Engineering custom hardware in aluminium. The case has a velcro patch for attaching it to the OP-1 soft case which can be bought separately.

Details:

Production country: China

Shell material: 100% Cordura nylon from South Korea

Lining material: 100% Polyester from China

Hardware material: 100% aluminium from China

Measurements: 24.5cm x 8.5cm x 2cm


Read more
MRP:$93.76 SAVE 17%
 2 in stock $78.12
Click for better price!
or call +44 20 7424 1960
quote 803160
UDG Creator Akai MPC One Hardcase (black)
UDG Creator Akai MPC One Hardcase (black) (music production controller hardcase)
UDG
Cat: 795498 Rel: 30 Dec 20
 
Hard case for Akai MPC One controller
Notes: A Digital DJ looking for a professional, durable case solution for your Akai MPC One controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai MPC One controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Color: Black
Weight: 0,56 kg / 1.232 lbs
Outer Dimensions (W x H x D): 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D): 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits: Akai MPC One Controller

Please note: The Akai MPC One Controller is not included in this purchase, it is shown for demonstration purposes only.
Read more
MRP:$61.15 SAVE 17%
 1 in stock $50.94
Click for better price!
or call +44 20 7424 1960
quote 795498
UDG Ultimate Straight USB 2.0 A-B Audio Cable (blue, 1.0m)
UDG
Cat: 753612 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in blue - 1 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$10.87 SAVE 24%
 2 in stock $8.21
UDG Ultimate Straight USB 2.0 A-B Audio Cable (blue, 2.0m)
UDG
Cat: 753614 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in blue - 2 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$13.59 SAVE 25%
 1 in stock $10.18
UDG Ultimate Straight USB 2.0 A-B Audio Cable (green, 1.0m)
UDG
Cat: 753618 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in green - 1 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$10.87 SAVE 24%
 2 in stock $8.21
UDG Ultimate Straight USB 2.0 A-B Audio Cable (green, 2.0m)
UDG
Cat: 753619 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in green - 2 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$13.59 SAVE 25%
 2 in stock $10.18
UDG Ultimate Straight USB 2.0 A-B Audio Cable (orange, 1.0m)
UDG
Cat: 753626 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in orange - 1 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$10.87 SAVE 24%
 4 in stock $8.21
UDG Ultimate Straight USB 2.0 A-B Audio Cable (orange, 2.0m)
UDG
Cat: 753628 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in orange - 2 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$13.59 SAVE 25%
 1 in stock $10.18
UDG Ultimate Straight USB 2.0 A-B Audio Cable (red, 1.0m)
UDG
Cat: 753639 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in red - 1 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$10.87 SAVE 24%
 3 in stock $8.21
UDG Ultimate Straight USB 2.0 A-B Audio Cable (red, 2.0m)
UDG
Cat: 753642 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in red - 2 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$13.59 SAVE 27%
 1 in stock $9.91
UDG Ultimate Straight USB 2.0 A-B Audio Cable (yellow, 1.0m)
UDG
Cat: 753650 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in yellow - 1 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$10.87 SAVE 24%
 1 in stock $8.21
UDG Ultimate Straight USB 2.0 A-B Audio Cable (yellow, 2.0m)
UDG
Cat: 753651 Rel: 07 Jan 21
 
Straight USB 2.0 cable with streamlined design, in yellow - 2 metre length
Notes: Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.
Read more
MRP:$13.59 SAVE 25%
 1 in stock $10.18
Singles
You're Gonna Miss Me
You're Gonna Miss Me (limited picture disc 10")
Cat: CRLY 20161. Rel: 08 Jan 21
Psych/Garage Rock
  1. You're Gonna Miss Me (2:31)
  2. Tried To Hide (2:51)
Gespielt von: Man Power
 in stock $15.84
Double Twenty
Cat: SNORK 106. Rel: 15 Dec 20
Techno
  1. Sonus 2 (9:22)
  2. Computing (9:07)
  3. Poly Rhytmic Acrobatic (8:10)
  4. Log (8:18)
 in stock $11.60
Yossi Amoyal Presents Fluere IV
  1. A1 People - "Do It" (Metamatics remix)
  2. Kosmogonik - "Circuitry"
  3. Silicon Scally - "Relay"
  4. Matt Chester - "November Pathways"
  5. CiM - "Recursive"
Review: Since Zip and Villalobos made it one of their coveted deep digs to be heard pealing out of a thousand after hours sessions, the Metamatics remix of A1 People has been a teasingly out of reach dream grab for many a minimal electro head. Now Yossi Amoyal has done the good deed of getting the track remastered and repressed as part of his Fluere series toasting 15 years of Sushitech. As well as that masterclass of elegant machine funk, there's also Kosmogonik's mind-bendingly brilliant 'Circuitry', Silicon Scally's body-popping electro-noir 'Relay' and Matt Chester's melancholic 'November Pathways' to keep your up-all-night marathon sets peppered with spangled surprises.
Read more
 in stock $12.45
Falkenburg
Falkenburg (7" limited to 100 copies)
Cat: ACTR 001. Rel: 14 Dec 20
Dub
  1. Falkenburg (3:04)
  2. Bomen (live mix) (2:28)
  3. Lurkdub (2:10)
 in stock $12.45
The Moonlight Runner
The Moonlight Runner (limited 7")
Cat: DTWS 009. Rel: 22 Dec 20
Roots/Lovers Rock
  1. Abeng & The Co-Operators - "The Moonlight Runner" (4:18)
  2. Eeyun Purkins - "Fugative Dub" (4:16)
 in stock $15.00
Rave Encounter Vol 2
Rave Encounter Vol 2 (blue & purple vinyl double 10")
Cat: ROD 20202. Rel: 18 Dec 20
Hard Techno
  1. Marc Acardipane - "Rave Or Die" (4:19)
  2. Mental Fear Productions - "Constant Sorrow" (6:25)
  3. Dave Tarrida - "Rave Death Cult" (5:27)
  4. Umwelt - "Chaos & Mayhem" (5:30)
 in stock $26.89
The Night
The Night (blue vinyl 12")
Cat: KNV 002. Rel: 06 Jan 21
Disco/Nu-Disco
  1. Joe Mangione & Sandro Puddu - "The Night" (4:49)
  2. Joe Vinyle & Relight Orchestra - "The Night" (with Joe Mangione - Funky Vibes) (5:53)
  3. Morris Vale (UK) & Ago - "The Night" (Wakizashi version) (5:32)
  4. Joe Mangione & Roby Strauss - "The Night" (club mix) (5:44)
 in stock $21.51
THEORY 002
THEORY 002 (12")
Cat: THEORY 002. Rel: 18 Dec 20
Electro
  1. Hum (6:00)
  2. Richard's Dream (4:53)
  3. Y-Shape (2:17)
  4. Dozen Claves (6:55)
  5. Bulb (4:50)
 in stock $10.76
Venom
Venom (clear vinyl 12")
Cat: LENSKE 014. Rel: 17 Dec 20
Techno
  1. Assassin's Walk (5:40)
  2. Topaz (6:10)
  3. Venom (6:20)
  4. Light Enchantment (6:50)
Review: Since joining Amelie Lens' Lenske label last year, Dario Brkic AKA AIROD has delivered two EPs of typically tough, rave-ready workouts. He continues in a similar vein on this bombastic third 12" for the label, doffing a cap to Richard Hawtin and Hardfloor's 1990s acid-techno explorations on psychedelic opener 'Assassin's Walk', before delivering an even heavier and more ballsy slab of warehouse-ready techno on the blistering 'Topaz'. Over on the flip, title track 'Venom' sees Brkic add raw, trance-inspired synth motifs to a ten-ton techno beat, while 'Light Enchantment' fixes gently uplifting melodies and dreamy chords to the thrusting, stomping intensity of his trademark techno sound.
Read more
 in stock $14.16
Horrorscope EP
Cat: FTPL 006. Rel: 05 Jan 21
Minimal/Tech House
  1. Squiggles Day (6:43)
  2. Horrorscope (6:57)
  3. Mind Off (7:01)
  4. Osmosis (5:48)
 in stock $11.05
Artikel 1 bis 50 von 1,177 auf Seite 1 von 24 anzeigen
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALLE
1  2  3  ...  24  »

Filter

Back Catalogue: All Genres
Release Date
Close