Back catalogue: All genres

Notes: Further pushing the boundary of clock-defined pedals, the latest entry in Old Blood Noise Endeavors' BL series is a Phase Repeater, in the process making a genre entirely of its own.

Phase repetition takes the modulation of a phaser and applies it to the realm of time, creating a completely unique sound and more like delay or reverb than its namesake phaser. First used in the OBNE Dweller pedal, the BL-52 Phase Repeater represents a new spin on the sound, with simple controls including a Clock slider that enlightens the timing of everything in the pedal.

At a point, describing sound feels like describing time: the fourth dimensional perplexity of it all! Of course, this makes sense in that time being intermingled with sound and frequencies only existing over a period of time, whatnot. We spend a lot of time thinking about all-pass filters, you and I. How they pass all frequencies, but at different times. How this, in the digital realm, can create a phaser or a reverb, depending on how much memory you allow it and thus, how much of the fourth dimension it's playing with at any given... well, time.

BL-52 is what we call a phase repeater pedal. It's an effect we stumbled upon in our Dweller pedal development, living somewhere between phaser, delay and reverb, as it creates a series of repeats both unexpected and pleasing. It's digital trickery to do something quite unfamiliar and once you've bonded with it, is irreplaceable.

The BL-52 Phase Repeater is solely focused on that effect, with the Clock control setting the timing of the entire system: the sample rate that determines signal fidelity, the timing of the phase repetition and the speed of the LFO that shapes the diffusion of the repetition.

In short, it is an effect that does not require exactness, but rather openness to where the repetition will lead you.

Notes: Seeking to unapologetically tear apart the definition of a chorus pedal, Old Blood Noise Endeavors have created the BL-82 Chorus. An ode to delay time, this is a device with a variable clock control to shift between recognizable shimmering chorus and chaotic modulated delays.

Two delay lines, modulated by opposite synchronized LFOs, are combined in parallel and the timing of the delay lines, as well as the speed and depth of the LFOs, are all determined by one tactile slider. This allows you to instantly open up the modulated floodgates on the fly and go from well-known waves, to deeply unknown oceans of sound.

BL-82 is a chorus pedal, technically. It creates a swirling shimmery sound somewhere between chorus and flanger from a mono instrument signal. Its two delay lines are stretchable, and that's where the pedal's genre blurs from chorus into modulated delay into trailing pitch bending uncertainty.

The control set for BL-82 is dead simple. A Clock slider sets the timing of the entire system. The sample rate that determines signal fidelity, the centre delay time and the speed of the delay modulation are all affected as the slider slides. The interface is rounded out with feedback, volume, and mix add to an immediate experience that breaks open the boundaries of what it means to be a chorus and allows you to further craft the undulations of this mesmerizing device.

Notes: Tweaking the platform of their Fault overdrive/distortion, Old Blood Noise have carved out room for greater gain range, voice control, and clipping options in the Fault Version 2. The Fault remains a great overdrive with footswitchable second gain stage and three band EQ, and now excels as a clean boost and tweakable high gain distortion as well.

Notes: Warm and cozy

Class A Boost will fatten up and boost anything you feed it. This deceptively simple design uses discreet J-FET transistors in a single-ended "Class A" configuration to achieve the warmest possible tone. Class A Boost can deliver up to 20db of clean boost and remains effective with both instrument and line level signals. Superior signal to noise performance allows you to put the Class A Boost anywhere in your pedal chain. It can add punch and extra output to a classic overdrive sound and is able to push distortion pedals into extremely aggressive crunch land. Class A Boost is also ideal for hitting the front end of a tube amp to achieve an added layer of sweetness.

Knob-by-knob

Level: Sets the overall output volume.

Satisfying saturation

The feed-forward J-FET based design of the Class A Boost provides up to 20db of high-headroom boost with just enough class A saturation to warm up your tone.

Gotta bounce

Late for a rehearsal several light years away, Marvin thought it was a space mirage when he first saw Class A Boost-a trampoline strapped with rocket boosters. But before he knew it, he was blasting through time and space, landing in his buddy's garage right before their drummer (also late) counted in.

Model name: Class A Boost
Function: FET Clean Boost
Category 1: Utility
Bypass: True Bypass

Electronics

Voltage: 9-18VDC
Current draw: 100mA
Input impedance: 10M O
Output impedance: Freq. dependent

Body

Length (inches): 1.5
Width (inches): 3.75
Height (inches): 1.75
Weight (lbs): 0.5

Notes: Constellator is an all-analog delay pedal capable of producing up to 600ms of lush echo with adjustable modulation and a comprehensive sound palette. From percussive slapback and doubler sounds to chorused-out, long delays with endless repeats, the Constellator's MN3005 bucket brigade chips provide superior overall headroom and tape-like saturation when pushed to the limit. The Feel toggle switch adjusts several parameters simultaneously for an additional coloring of LFO modulation. With the Feedback control maxed out, the Constellator is capable of self-oscillation which can be pitched up or down by turning the Time knob. Runs on standard 9VDC.

Knob-by-knob

Time: Sets your delay time. Clockwise for slower, counter-clockwise for faster.
Mix: Controls your dry/wet balance.
Mod: Controls the modulation depth. Adds color and warp.
Repeats: Sets the amount of feedback in the delay line.
Feel: Selects between two distinct modulation types. When the switch is pushed in, a chorus effect is selected. When the switch is not pushed in, a vibrato effect is selected.

King of bucket brigades

The pair of analog delay chips used in the Constellator are new production replicas of the mighty Panasonic MN3005 Bucket Brigade Devices (BBD) found in some of the most iconic vintage delay pedals of all time. With 4096 individual "buckets" and +15V power rails, the MN3005 provides the longest possible delay time and most available headroom in an analog delay. Luscious.

Make your ow myth

Develop shimmering delay lines with crystalline overtones and watch them scatter across the canvas in your mind. Constellate your own myth into being.

Specifications

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 10M
Output impedance: 150ohms

Body

Length: 1.5"
1.5
Width: 3.75"
Height: 1.75"
Weight: 0.5lbs

Notes: Morph across the spacetime spectrum.

Years in the making and the first of its kind, Cosmosis is a stereo, high-fidelity ambient reverb that allows musicians to tailor three original spaces-Theatre, Temple, and Cosmos-as well as manipulate them in real time. In addition to controls for the size of the reverb, wet/dry blend, and filtering, Cosmosis features a unique Morph function that allows musicians to alter their reverb settings in real-time by pressing the left footswitch. The three space algorithms found inside of Cosmosis are all-original and truly unique. Theatre puts the player in a variable room that ranges from cozy to highly reflective using multiple parallel short reverberators. Temple occupies a dramatic, large indoor space by implementing numerous long reflections in both parallel and series. And Cosmos creates an enormous spectrum of heavenly reverb derived from the harmonic content it's fed. The Morph feature found in Cosmosis provides a simple way for players to trigger a gradual change to various reverb parameters over a specified amount of time set by the accompanying Morph Rate knob. Players can set both "red" and "green" values on their Tone, Blend, and Size knobs, then engage the Morph footswitch to oscillate between the two reverbs at their desired rate. Any combination of knobs can be assigned to morph. Create elegant morphs for subtle movement or sweeping, cinematic morphs for dramatic sound design effects. Save up to four custom reverb presets, including morphing. Cosmosis runs on standard 9VDC power.

Knob-by-knob

Size: Sets the size of the reverb space.

Blend: Sets the balance between wet (reverb) and dry (clean signal)

Tone: Clockwise from noon, this control applies a high-pass filter, making the reverb sound brighter. Counter-clockwise from noon, this control applies a low-pass filter, making the reverb sound darker.

Morph Rate: Sets the time it takes for parameters to change between "red" and "green" values when the Morph footswitch is engaged.

Morph: Enable morphing for any combination of the 4 on-board knobs. Push to toggle through knobs, press and hold to select. Press and hold again to deselect.

Preset Select: Push to toggle through 4 pre-loaded presets, press and hold to select. To save a custom preset after making changes, press and hold. Presets can also be toggled and selected using only footswitches (see manual).

Space Select: Push to toggle through 3 available reverb spaces.

Three evocative spaces

The three unique space algorithms found inside of Cosmosis are entirely original and comprise a combination of primary source impulse responses, imagined reflections, and inspired mathematics. Theatre is a vintage-inspired small room sound ranging from cozy to reflective; Temple is a rich and flowing larger space featuring long reflections in both parallel and series; and Cosmos makes use of divine inspiration to create an enormous spectrum of harmonically-informed reverb. Kill the Size knob in any space to conjure a ghostly, full-wet "reverse" reverb effect.

Enter the world of cosmosis

A portal of such divine proportions was always missing in the Pigtronix universe. One day, traveling further than ever before into the outermost reaches of what he knew to be true, Marvin caught glimpses of refracted light and mist hovering in the atmosphere of a new, far-distant planet. This was the long-sought Cosmosis-a planet that takes in the sounds of the galaxy, sublimates them, and ushers them to the other side forever changed.

Model Cosmosis

Model name: Cosmosis
SKU: COS
Function: Stereo Ambient Reverb with Morphing
Category 1: Reverb
Expression: TRS Remote
Bypass: Buffered

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 1k
Body

Length (in): 3.25
Width (in): 4.5
Height (in): 2.2
Weight (lbs): 1

Notes: Echolution 3 is a multi-tap stereo modulation delay offering a myriad of sound design options including reverse, jump, pong, modulation tempo sync, variable low pass filter, flexible signal routing and comprehensive MIDI control. Delay times ranging from 100ms to 5 seconds can be dialed in using the Time knob or via Tap Tempo using the left footswitch. A second delay tap can be set to the same length or a fraction of the main delay time to create rhythmic echoes. The ¾ fraction creates a dotted eight note delay, while the Golden fraction uses the sacred geometry of the Golden Ratio (.382) as the multiplier for the second tap. The multi-tap settings can be even further enhanced by the stereo ping pong effect, which causes the different delay taps to switch sides on each repeat. Store up to 4 presets, unlock hidden features with the Universal Remote footswitch, and design yet unheard delay lines. Runs on standard 9VDC.

KNOB-BY-KNOB
Time: Sets the length of the delay line. Overrides tap tempo and vice versa. Select sub-divisions with the small push button. Can activate any two sub-divisions at once.

Mix: Sets the volume level of the delay signal.

Repeats: Sets the amount of regeneration in the delay line.

Mod: Select and set the modulation Speed, Depth, and Tone. Hold push button to sync Speed to tap tempo.

Preset Select: Push to toggle through presets, press and hold to select. To save a preset after making changes, press and hold. Presets can be toggled and selected using only footswitches (see manual).

Special FX: Reverse makes the delay line go backwards. Jump makes the delay line jump up one octave. Pong (activated with a push and hold) causes echoes to alternate between the left and right channels, meant to be used in stereo.

BREAK RULES AND BUILD WORLDS
Designed to offer a streamlined user experience and a massive feature set, Echolution 3 is a worldbuilder. In a compact package, "E3" offers multi-tap delay lines, with sound design FX options ranging from the subtly cinematic to the outlandishly dramatic. I/O options include stereo output, MIDI sync, and additional footswitch features. On board presets make revisiting your favorite corners of the Echolution 3 universe simple.

HOW TO DISAPPEAR COMPLETELY
Marvin has come across Echolutions in the Pigtronix universe beforeibut never quite like this. Echolution 3 is a supermassive black hole leading to a vivid dimension stuffed with color, light, and the unexplainable, causing the voyager to lose his or herself more deeply than they knew was possible. In this dimension, the imagination tends to expand: familiar figures appear in cloud formations, meteorites can be sat on like bean bag chairs, and ropes of light can be swung on like vines.

MODEL ECHOLUTION 3

MODEL NAME: Echolution 3
SKU: E3
FUNCTION: Stereo Multi-Tap Delay
CATEGORY 1: Delay
CATEGORY 2: Modulation
EXPRESSION: TRS Remote / MIDI
BYPASS: Buffered

ELECTRONICS
VOLTAGE: 9VDC
CURRENT DRAW: 100mA
INPUT IMPEDANCE: High
OUTPUT IMPEDANCE: 1k

BODY
LENGTH (IN): 3.25
WIDTH (IN): 4.5
HEIGHT (IN): 2.2
WEIGHT (LBS): 1

Notes: Gamma Drive is a germanium-enhanced overdrive with active Treble and Bass EQ controls. Achieving articulate, touch-sensitive performance characteristics via a unique mixture of germanium, LED and silicon diodes arranged to produce asymmetrical clipping, Gamma Drive offers overdrive rich in 2nd order harmonics, which creates sweet, blooming tone. Offering a range of overdrive from sparkling clean boost to a raging distortion, Gamma Drive was designed for versatile playing across a wide variety of musical genres.

KNOB-BY-KNOB
Gain: Sets the amount of distortion
Volume: Sets the output level
Treble: Boosts or cuts high frequencies centered at 2kHz
Bass: Boosts or cuts low frequencies centered at 80Hz.

TOUCH-SENSITIVE ANALOG DRIVE
Gamma Drive's unique mixture of clipping diodes allow for touch-sensitive response, where natural saturation breaks up further as the player digs in. With the addition of a 2-band EQ, players can dial in Gamma Drive with precision, resulting in a lively, amp-responsive tone.

RIPPING THROUGH THE UNIVERSE
Listen - how do you think Marvin has the time to explore the infinite depths of the cosmos and bring back all these wild discoveries? He kicks it into Gamma Drive, c'mahhhn.

MODEL GAMMA DRIVE
MODEL NAME: Gamma Drive
SKU: GDR
FUNCTION: Overdrive with 2-band EQ
CATEGORY 1: Overdrive
CATEGORY 2: Distortion

EXPRESSION

BYPASS: True Bypass

ELECTRONICS
VOLTAGE: 9VDC
CURRENT DRAW: 100mA
INPUT IMPEDANCE: 10M
OUTPUT IMPEDANCE:150ohms

BODY
LENGTH (IN): 1.5
WIDTH (IN): 3.75
HEIGHT (IN): 1.75
WEIGHT (LBS): 0.5

Notes: Gatekeeper is a lightning fast, studio-quality noise gate that locks out unwanted noise from any rig. Featuring Threshold and Release knobs, Gatekeeper provides 100% attenuation with unprecedented response time and utilizes ultra high-speed J-FET circuitry to completely eliminate hum, hiss, buzz and any other intrusive non-musical sounds from your signal path. Its wide range Threshold control combines with exceptional headroom to deliver smooth transient response previously available only in rackmount, studio-oriented noise gate processors. The addition of the Release knob allows the user to control how long it takes gate to slam closed.

Knob-by-knob

Threshold: Sets the dynamic at which the noise gate activates.
Release: Sets the release time of the noise gate.

Designed for all rigs

Mercilessly cutting out any and all sounds you don't want to hear at the very instant you stop playing, the Gatekeeper was designed with even the most high-gain rigs in mind. Crank the volume without fear of the annoying 60-cycle hum or white noise.

Specifications

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 10M
Output impedance: 150ohms

Body

Length: 1.5"
Width: 3.75"
Height: 1.75"
Weight: 0.5 lbs

Notes: Dusky drama

Gloamer is an all-analogue, polyphonic amplitude synthesizer that alters the attack and decay time of any sound source without sacrificing the fidelity of the original tone. Its attack function provides a pick-triggered volume swell: a cinematic "slow gear" effect that is smooth and controllable with variable timing from extremely fast to very slow. The volume swell cycle can be reset at any moment by muting, allowing players to craft bowed string-like lines and chords with ease. Gloamer also features a powerful optical compressor that can add subtle punch or extreme sustain, helping to maintain a smooth volume swell effect even with very long attack times. A Volume knob controls loudness at the peak of the attack cycle, while a master Blend control allows players to layer an uncompressed clean sound in with the volume swell effect. Additionally, when activated, the Decay function causes notes to fade out once the attack cycle is complete. When the decay cycle is completed, an auto-reset function causes the attack to begin again immediately, as long as there is audio input. This allows you to create a wide range of undulating, asymmetrical tremolos at slower settings as well as pulsating stutter effects when using faster attack and decay times.

Knob-by-knob

Volume: Sets the master output volume of the effect when engaged.
Compression: Determines the balance of clean and compressed signal.
Blend: Determines the balance of clean signal and effect.
Attack: Determines the duration of time it takes for a note to swell in from silent to full volume.
Decay: Determines the duration of time it takes for a note to fade out from full volume to silence.
Sensitivity: Determines how much input signal is needed to reset the attack and decay cycle.
Ready (LED): Signals when the pedal is armed and ready to begin the attack and/or decay cycle.

A hi-fi attack and decay master
Gloamer was designed to allow players to change the nature of their attack and decay while maintaining pristine, hi-fidelity audio. Easily swell blooming single note lines or full, lush chords and become the string section you've always wanted to hire but can't afford.

Model name: Gloamer
SKU: ATS
Function: Volume Swell with Compressor
Category 1: Modulation
Category 2: Compression

Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 470K
Output impedance: 150 ohms

Body:

Length (in): 3.5
Width (in): 4.75
Height (in): 2.5
Weight (lbs): 1

Notes: Pigtronix Infinity 2 is a stereo looping pedal with two independent loops and a streamlined user interface that has been designed to provide an intuitive musical workflow, right out of the box.

The Infinity 2 enables musicians to seamlessly switch between parts, even during initial recording or while overdubbing. This Verse / Chorus type of workflow is further expanded by the ability to delete the loop that is not currently playing - freeing up an open slot for a new loop to be created, without interrupting playback.

Nearly all actions taken by the Infinity 2 occur at the loop boundary. This allows the musician to cue an overdub, switch between loops or stop precisely at the end of a loop, without having to worry about hitting the footswitch at precisely the correct time. Simply tell the machine what to do and it will occur at the end of the current loop. This is the general rule of thumb for all commands, with a few exceptions such as instant stop and fade out, which take place immediately when activated.

A small push-button switch, located above the left footswitch, allows the user to change the functionality of this footswitch to perform various Stop, Stutter and Octave Shift effects. A TRS remote jack allows these special features to be triggered by an external switch. Undo / Redo functionality can also be assigned to the left footswitch, allowing the musician to remove previous overdubs and add them back as desired.

In addition to a dedicated knob for loop Volume, the Infinity 2 also features a Decay knob that causes loop audio to fade out progressively during overdub. With the Decay knob set fully clockwise, the layers pile up at full volume. With the Decay knob set fully counter-clockwise, each overdub lasts for only one loop cycle. With the Decay knob set anywhere in-between those extremes, overdubbing on the Infinity 2 creates constantly evolving loop textures that can be instantly snapped back to a previous state using the Undo function.

The Infinity 2's full-range, high-headroom audio inputs will accept mono or stereo instruments as well as line-level signals. The dual outputs of the Infinity 2 can be routed for stereo output with pass-through and loop audio mixed together, or they can be configured for discrete Wet / Dry operationiwhere the loop audio is summed to one output, and pass-through audio is sent to the other.

Infinity 2 combines the high-fidelity audio and ultra-low-latency looping engine of the original award-winning Pigtronix Infinity Looper, with a much smaller form factor and a user interface specifically designed to make looping fun and musical for everyone.

Notes: Moon Pool is an analog phase shifter and tremolo with independent speed controls featuring the ability to change the rate of one or both of the effects in either direction, corresponding to how hard you play. The 4-stage, VCA-based phaser and variable bias tremolo found in the Moon Pool can each be run as standalone effects or they can be combined in series for a mesmerizing mashup of modulators. A global Depth knob determines overall wetness, while a Sensitivity knob allows you to dial in the responsiveness of these changes to accommodate different playing styles and colors. Runs on standard 9VDC.

Knob-by-knob

Phase Speed: Sets the rate of modulation for the phaser.
Trem Speed: Sets the rate of modulation for the tremolo.
Depth: Sets the intensity of both the phaser and tremolo.
Sens.: Determines how much signal is required to change the speed of both phaser and trem when dynamics processing is turned on.

Trem / Phase (Three-Way Toggle): Up = trem engaged, Center = both engaged, Down = phaser engaged

Phaser Dyn. (Three-Way Toggle): Up = phaser speed increases in response to playing dynamic, Middle = no change, Down = decreases

Trem Dyn. (Three-Way Toggle): Up = trem speed increases in response to playing dynamic, Middle = no change, Down = decreases

Dynamically-responsive, wide-range dual LFOs

Moon Pool features a pair of LFOs that can be independently modulated by the amplitude of your playing. Engaging the dynamics switches enables these LFOs to travel well beyond normal limits, creating wild FM tones at maximum speed and gradually evolving textures when slowed way down. Equal parts out-of-this-world and inherently musical.

Get lost in the slosh

Sometimes, you gotta kick off your moon boots, slip into a moon pool, pour yourself a moon juice, and get lost in the slosh.

Specifications

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 2.2M
Output impedance: 150ohms

Body

Length: 1.5"
Width: 3.75"
Height: 1.75"
Weight: 0.5 lbs

Notes: Octava is an all-analog octave fuzz / frequency doubler featuring an on-board low pass Filter control that allows you to achieve singing octave up tones anywhere on the neck, without adjusting your guitar's tone control. A front-end Drive and gushing Fuzz circuit add signal power and easily convert Octava to shoegazey fuzz pedal capable of producing devastating, full-wave rectified distortion. Use the Blend knob to mix the octave up effect on top of your dialed-in drive.

Knob-by-knob

Volume: Sets the overall output volume.
Blend: Mixes in the octave-up effect.
Filter: A low-pass filter tone knob. Sets the cutoff frequency of the low pass filter on the input of the Octave circuit.
Drive: Mixes in warm front-end overdrive by increasing the gain of the J-FET preamp stage.
Fuzz: Activates the fuzz circuit.

All analogue, still versatile

Built with the theory of "do one thing and do it well" paired with the flexibility of more diverse effects units, the Octava transitions seamlessly between a singing octave-up to an overflowing fuzz, and every blended tone between.

The Octavia ribbons

Parallel ribbons made up of complex patternwork wave ever-so-slightly in the blackness of space. It is from this mysterious place Octava was harvested. Pretty much sounded like a badass octave fuzz.

Specifications

Electronics

Voltage: 9-18VDC
Current draw: 100mA
Input impedance: 2.2M
Output impedance: 150 ohms

Body

Length: 1.5"
Width: 3.75"
Height: 1.75"
Weight: 0.5 lbs

Notes: Enlightening

Elevating the groundbreaking optical compression of the original Philosopher's Tone to a new plane of tonal enlightenment, the Philosopher's Tone 2 is a world-class compressor/sustainer with footswitchable Grit, allowing for more versatility than ever before. Featuring a refined implementation of the overdrive circuit first heard in the limited-edition Gold version of this iconic compressor pedal, the unique germanium distortion found in the Philosopher's Tone 2 delivers smooth top end and rich midrange response, tailored to perfectly match the characteristics of the optical sustainer driving it. In addition to Volume and Sustain controls, the Philosopher's Tone 2 features a parallel clean Blend knob that allows musicians to mix their instrument's original tone with the compressor/sustainer effect when the Grit circuit is bypassed. This mixing technique restores natural pick-attack and allows clean settings with extreme sustain to remain dynamic and musical. When the Grit circuit is engaged, the Blend knob is automatically bypassed, circumventing the compromises of the original unit and imparting a colourful distortion to your sound in both Germanium and Silicon modes. This nonlinear diode-clipping can range from subtle overdrive to overflowing distortion, all without unwanted feedback. A Treble control located just before the master Volume provides 6db of cut or boost at 2kHz for fine-tuning the frequency response of the effect. The Philosopher's Tone 2 features true-bypass switching and internal 18V power rails for maximum clean headroom that is ideal for use with hot pickups, active bass, synthesisers and other line-level sources. Runs on 9VDC.

Knob-by-knob

Volume: Sets the overall output volume.
Treble: Boosts or cuts treble at 2kHz.
Sustain: Sets the amount of sustain.
Blend: Mixes your compressed effect with your clean signal. Note: This control is only active when the Grit footswitch is turned OFF.
Grit: Controls the gain of the overdrive stage. Note: This control is only active when the Grit footswitch is turned ON.

Rare design

Generations of guitar players have sought noiseless clean sustain from a compressor, and this was the guiding goal of the research and design behind Philosopher's Tone, yielding a compressor with an internal 18 volts of headroom and naturally musical tone control.

The evolution of Philosopher's Tone

First released in 2009 and igniting a new following for Pigtronix, the Philosopher's Tone 2 is a "best of" design, incorporating the best elements of previous iterations plus a completely redefined Grit knob for significantly more versatility.

Modern-day alchemy

Practitioners of the mystical and ancient art of alchemy long sought an element called the Philosopher's Stone. They believed, if found, it could turn lead into gold and bestow immortality upon the person who wielded it. Philosopher's Tone 2 allows players to conjure gleaming sustain, soaring lead tones, and articulation across all six strings.

Model name: Philosopher's Tone
Function: Optical Compressor Sustainer
Category 1: Compression
Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 150ohms

Body
Length (inches): 1.5
Width (inches): 3.75
Height (inches): 1.75
Weight (lbs): 0.5

Notes: Famous for its noiseless clean sustain, the Philosopher's Tone has staked its claim in the crowded world of compressor pedals. In addition to Volume and Sustain controls, the Philosopher's Tone features a parallel Blend knob that allows the musician to mix their instrument's original tone with the compressed sound effect. This technique restores natural pick-attack and allows more extreme sustain settings to remain musical. The Treble control provides up to a 6db cut or boost at 2kHz for fine-tuning the frequency response of the effect. The Philosopher's Tone features true-bypass switching and internal 18V power rails for maximum clean headroom, even when used with hot pickups and line level signals.

Knob-by-knob

Volume: Sets the overall output volume.
Sustain: Sets the amount of sustain.
Treble: Boosts or cuts treble at 2kHz.
Blend: Mixes your compressed effect with your clean signal.

Rare design

Generations of guitar players have sought noiseless clean sustain from a compressor, and this was the guiding goal of the research and design behind Philosopher's Tone, yielding a compressor with an internal 18 volts of headroom and naturally musical tone control.

Modern-day alchemy
Practitioners of the mystical and ancient art of alchemy long sought an element called the Philosopher's Stone. They believed, if found, it could turn lead into gold and bestow immortality upon the person who wielded it. Turns out it was waiting in the depths of space all along.

Specifications

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 150ohms

Body

Length: 1.5"
Width: 3.75"
Height: 1.75"
Weight: 0.5 lbs

Notes: Fuzz sculptor with an appetite

Star Eater is an all-analogue, dual footswitch super-jumbo Fuzz with a footswitchable booster and variable filter stage, allowing players to easily sculpt a massive array of inspiring, unique fuzz tones. On the fuzz side, newly-available, precision-matched transistor pairs are utilized to ensure that each and every unit is perfectly dialled in to "the sweet spot" that can be so elusive to find in vintage pedals. A rocker switch provides your choice of Germanium or Silicon colour. Downstream from the fuzz, a powerful booster stage drives the filter in the Star Eater. Scoop and Bump voicings for the filter can be selected via a rocker switch, drastically changing the frequency response of the Sweep control throughout its entire range. Built to last and designed to inspire, the Star Eater brings a unique approach and a new standard of performance to the world of boutique fuzz pedals. Runs on standard 9VDC.

Knob-by-knob

Hunger: Determines the amount of gain in the fuzz.
Volume: Determines the output level of the fuzz.
Sweep: Sets the frequency response of the filter. Note: The Sweep knob is only active when the Contour footswitch has been turned on.
Voice: Selects between Silicon (Si) and Germanium (Ge) diode clipping in the fuzz circuit.
Contour: Changes the shape of the tone.

Back to the future

Inspired by the chunky chassis feel of the late 70s and early 80s, Star Eater was designed to offer a fun, tactile user experience and make it easy for players to fine tune their own signature fuzz tone.

Model

Model name: Star Eater
SKU: FUZ
Function: Super-Jumbo Fuzz with Filter
Category 1: Distortion
Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 1k
BodyLength (in): 3.5
Width (in): 4.75
Height (in): 2
Weight (lbs): 1

Notes: Cutting Room Floor V3 Pedal

(Vintage Reel-to-Reel Tape, Echo, and Stutter)

The Cutting Room Floor has been updated and now has separate controls over the saturation of the input signal and tape delay signal. With this change, it's possible to have any amount of emulated tape saturation on the input signal and an adjustable tape delay level.

Housed in a smaller, compact footprint, the Cutting Room Floor V3 provides beautifully marred saturated tape tone and ethereal repeats. Imagine an abandoned factory with a fluttering tape machine left on infinite replay.

The Cutting Room Floor was designed to emulate the sound and functionality of vintage reel-to-reel tape overdrive and echo. This pedal reaches into the 21st century with characteristics that traverse the world of modulation and delay. Other features include a freeze button that traps a tone while still playing, and expression/CV control for time.

Designed and assembled in Seattle, Washington. Includes a limited 1-year warranty, if registered within 30 days of purchase.

- 150ma current draw

New in V3:

- Independent control of the tape saturation and tape delay levels

- High-quality knobs with textured grip

- Tape reel design lights up when the pedal is on

- Better layout of the knob placement

- Smaller 125B enclosure (4.77" x 2.6" x 1.39")

Notes: Shortwave

(Lo-fi Radio and Wire Recorder Emulation)

Inspired by espionage devices used during World War II and the Cold War, Shortwave transforms audio into clandestine operations of the past; Russian number stations, mysterious sounds transmitted by radio, and eerie sounds stored on early portable recorders.

Choose between 2 types of noise and interference, and control it with the Exposure parameter. Velocity and Focus control the amount of pitch stabilization. Shortwave will add an interesting emotional response and atmosphere to dry, simple sounds, or destroy a signal like no other fuzz pedal can.

Hand-wired in Seattle, Washington. Shortwave operates on a standard "Boss" style 9vdc power supply, not included. True bypass switching. Includes a limited lifetime warranty, if registered within 30 days of purchase.

Enclosure size: 4.77" x 2.6" x 1.39"

Notes: The Bitmap is a bitcrusher with fractional bit reduction and sample rate modulation. The Bitmap 2 adds waveshaping, wavefolding, and a window comparator for extreme digital distortion. A drive control handles everything from single coil guitars to synthesizers, with +8 dBu maximum signal level and enough gain to sound like an overdriven mixer channel. Modulation and envelope control create dynamic, responsive distortion and digital artifacts.

The Bitmap 2 is tuned to provide maximum sustain without sputtering on staccato notes. Less extreme settings add layers of nonlinearities that interact in subtle ways, giving you the warmth and grit of 8- and 12-bit samplers. Sample rate reduction turns your guitar into 8-bit video game sounds or twists scales into inharmonic melodies. Sample rate modulation adds subtle motion or morphs your guitar into entirely new textures.

The Bitmap works with guitar, bass, synthesizers, drum machines, and other instruments or line level sources.

Size:3.05" x 4.75" x 2.5"
Input impedance:1 MO
Output impedance:< 1 kO
Bypass: analog buffered
Power: 9 VDC, center negative
Current: 250 mA

Notes: Particle is a granular delay / pitch shifting pedal. It chops your signal into small grains and then rearranges, shifts, and mangles it, using the techniques of granular synthesis in real time. Results range from radical pitch and delay modulation to shimmering repeats to time stretching, stutter, and glitch sounds.

Five delay and three pitch modes give intuitive control over random delays, bubbling textures, time stretching, and rhythmic glitches. Take a unique approach beyond conventional delay, pitch, flanging, and chorus sounds. Freeze notes with adjustable threshold for stutter, punch in, or drone-line effects. Lock multiple parameters to tap tempo or MIDI sync with independent note divisions for intricate rhythms. Access all parameters via MIDI, tablet, or "modeless" front-panel operation for full control over granular processing.

The Particle 2 is performance friendly, with controls spaced for real-time tweaking and designed so you can explore new sonic territory while remaining in control. Use the assignable expression pedal or DIY-friendly remote switch for hands-free control. The Particle 2 is pedalboard-friendly with all jacks on top. With full MIDI control, stereo input/output, and +8 dBu maximum input level, it is also at home in modular setups or the studio.

Size: 3.05" x 4.75" x 2.5"
Input impedance: 1 MO
Output impedance:< 1 kO
Power: 9 VDC, center negative
Current:250 mA

Notes: The Raster is a digital delay with a pitch and frequency shifter integrated into the feedback loop. Forward or reverse delay can be shifted once or have continuously shifted repeats. It delivers a wide range of sounds including modulated and harmonized delays, reverse delays, chorus, arpeggios, infinite descents, chaotic self-oscillation, and continuously evolving soundscapes.

The core of the Raster is a clean delay with up to 1600 milliseconds of delay time. Three delay ranges allow you to precisely dial in resonant feedback sounds and instantly change delay time with rhythmic shifts. The feedback control has infinite repeats at 3 o'clock and chaotic, textured feedback loops at higher levels. Knob responses are carefully tuned for exploration of self-oscillation and feedback on the verge of blowing up. A tone control sweeps from dark analog-style repeats to digital clarity and emphasizes the attack at higher settings. The left and right delay times can be set as a ratio, so a single knob changes both in sync. The two delay channels can be arranged in series, parallel or ping pong.

Pitch shifting repeats up or down in semitone steps creates tempo-synced arpeggios and alien organ sounds. The detune setting can dial in micro pitch shifts and chorused repeats. The left and right channels can be shifted by the same amount, a ratio, or opposite directions. At subtle settings, repeats evolve in a way that sounds natural, but different from analog delays.

Beyond pitch shifting, a combination phase/frequency shifter creates subtle evolving repeats, dissonant harmonies, and barber pole flanging. It can be pushed to extremes for ring modulation and inharmonic shifted delays that distort and break apart.

The Raster's modulation section has seven waveforms that can be assigned to delay time, pitch shift, or effect level (for tremolo). There are two random waveforms for glitchy pitch jumps, wow and flutter, and broken tape deck effects. Envelope and inverse envelope enable dynamic flanging and pitch bent delays. Stereo controls adjust the modulation amount and phase between channels, for subtle shifts or swirling psychedelic washes.

Capable of extreme sonic mayhem, the Raster can also be used with restraint to add unique character to your sound.

The Raster 2 is performance friendly, with 6 knobs and 9 switches. The original Raster was praised for its knob response and immediacy, and the Raster 2 maintains that simplicity while adding flexible modulation and extensive stereo functionality. Alternate knob settings are related to the primary knob function, labeled, and off at the center position. Both footswitches can be latching or momentary, for instant pitch jumps or quick blasts of echo. The bypass switch can also mute the output in bypass while always listening, to catch, repeat, and manipulate what you just played.

While designing the Raster 2, we wanted to enable as many classic rack mount digital delay tricks as possible while keeping the fast and intuitive control that made the original Raster so fun to use. Instead of multiple modes with generic knob names, all of the parameters are always available, so you can mix and match different effects and explore new sounds in between.

Size: 3.05" x 4.75" x 2.5"
Input impedance: 1 MO
Output impedance: < 1 kO
Bypass: analogue buffered
Power: 9 VDC, center negative
Current: 250 mA

Notes: Mess with time and space in real time with this impressive pitch-shifter and time-stretcher. Reverse and tape stop effects, looping, randomisation and much more, with optional expression and MIDI control.

Supplier's Notes:
The Tensor gives you live reverse and tape stop effects, pitch shifting, time stretching and hold functions that you can combine in creative ways. Slow down, speed up and rewind in real time. Stretch or compress time with no pitch change. Loop, overdub, and randomly slice phrases up to 9.4 seconds (4.7 seconds in stereo).

Intelligent randomization adapts to the knob settings. The results range from occasional CD skips, stutters, and rhythmic repeats to random slicing and erratic pitch shifts. Both foot switches have momentary and latching modes to inject pitch jumps, glitches, or instantly rewind what you just played.

The Tensor is in a pedalboard-friendly enclosure with all jacks on top. All controls are immediately accessible with well-spaced knobs for live tweaking, and USB MIDI for recording and sequencing.

Listen to music written around the Tensor: Tensor Tracks on bandcamp

New in firmware version 1.1:

Loop sampler functions (retrigger / stop / one shot) via MIDI or remote switch
31 presets via MIDI or remote switch
Expression pedal assignable to any knobs
Improved MIDI scaling for speed, time, and pitch
Kill dry mode (always mutes dry signal)

Size:3.05" x 4.75" x 2.5"
Input impedance:1 MO
Output impedance:< 1 kO
Bypass:Analogue buffered
Power:9V DC, center negative
Current:250 mA

Notes: Something a bit different here. Red Panda's Radius combines ring mod and frequency shifter circuits with pitch tracking and modulation. Controllable chaos which delivers unique bell-like tones, atonal phaser sounds and much more.

Supplier's Notes:
Ring modulator / frequency shifter.

The Radius is a ring modulator and frequency shifter with pitch tracking and an advanced LFO. It is designed around a novel "eight-quadrant multiplier" algorithm that smoothly transitions from ring modulation to frequency shifting and allows different frequency ratios for the upper and lower tones. Radius puts complex harmonic structures, bell-like tones, metallic textures, frequency shifting, soft tremolo, and bubbly phaser sounds at your fingertips.

A ring modulator multiplies two signal signals together to create new frequencies that are the sum and difference of the input frequencies. One signal is your instrument, and the other is an internal oscillator. The Radius can double the sum or difference frequency ratios and adjust their relative levels, unlocking a spectrum of timbres beyond traditional ring modulation.

Pitch tracking, a push-to-tune footswitch, and picking dynamics make the Radius responsive and predictable on stage. Hold the left footswitch and play a note to tune the carrier oscillator to that note. Pitch tracking maintains the pitch ratio as you play up and down the scale, or tracks by a ratio (or inverse) for more dynamic sounds. An expression pedal can be assigned to any combination of knobs.

The Radius has an advanced LFO with triangle, square, random waveforms and an eight step sequencer, all of which can be envelope triggered. The envelope follower makes it responsive to playing dynamics, and two "X" modulation waveforms create sweeping spectral changes.

Well-spaced controls and stereo input/output make the Radius perfect for sound design, synths, and creative mixing. A full MIDI implementation allows you to sync to MIDI clock, sequence parameter changes, and play the carrier oscillator from a keyboard.

The Radius is a musical ring modulator and frequency shifter that transforms the timbre of your instrument in new ways. With deep features and intuitive control, Radius modernizes classic electronic techniques for the future.

Dimensions: 3.1" x 4.75" x 2.5" (with knobs)
Shipping dimensions: 5.2" x 3.75" x 3.0"
Shipping weight: 1.1 lbs

Requires a 9V DC 250 mA power supply (not included).

Notes: Easily one of the best looper pedals on the market. Huge power from this six-track effect, allowing you to perform in new and creative ways. Great clear sound and user-friendly design.

Supplier notes:
6 Track, Stereo Looper Pedal with Touch Enabled Screen, Hands Free Mixing, and Simultaneous Parallel and Sequential Looping

The Aeros Loop Studio includes 3 hours of mono recording time (1.5 stereo), upgradeable to 48 hours when using SD card

This pedal includes 2 x 1/4" (6.35mm) inputs, 2 x 1/4" (6.35mm) outputs, expression pedal support, MIDI in/out, 1/4" (6.35mm) stereo aux input, and 1/4" (6.35mm) stereo aux output.

Built in wifi and bluetooth for over the air updates, the Aeros Loop Studio offers a revolutionary looping experience

Featuring the ability to create 36 unique loops per song, the Aeros Loop Studio goes beyond what's expected of a looper pedal. Add unlimited overdubs for each loop, and record up to 48 hours (when using an SD card).

Blurring the lines between traditional loopers and audio workstations, the Aeros Loop Studio allows you to mix your tracks live during a performance using the built-in scroll wheel, and gives the ability to save and export songs. This will let you share your best loops with your fans.

With its 4.3" touch-enabled screen and color coded cues and waveforms, the Aeros looper will never leave you wondering where you are in the loop.

Additionally, the Aeros Loop Studio packs tons of power into a small form factor. Coming in at just 7.8"? x 5.6" (198 x 142 mm), the Aeros lets you add a 6 track, stereo looper to any pedalboard.

Of course, the Aeros had to be fully compatible with Singiular Sound's drummer pedal: The BeatBuddy. Using the two together is a plug and play experience.

This new looper also features bluetooth and wifi, enabling us to add exciting new features with over the air updates. Simply put, there's no other pedal that can match the Aeros Loop Studio.

SPECIFICATIONS
Quantize your tracks in any time signature or play in freeform mode.

6 parallel tracks and 6 song parts for a total of 36 distinct loops per song and in an industry first, but also, simultaneous parallel and sequential looping.

Unlimited overdubs enable you to create layers and depth in your loops without worrying about restrictions.

Save your loops with the USB port or an SD card.

3 hours mono, 1.5 hours stereo recording time (20 minutes per song) using internal storage and up to 48 hours storage when using an SD card.

32-bit floating point processing, 24-bit recording, professional DACs, <1ms latency, and 20hz - 20kHz range for studio quality recordings.

Digital dry through bypass.

In addition, wifi compatibility for over the air updates and exciting, yet to be announced features.

Bluetooth for reasons.

Four built-in footswitches with our comfort+ switch tops (perfect for playing barefoot or in socks).

There is a built-in scroll wheel for hands-free mixing during a performance.

MIDI in/out ports for syncing seamlessly with the BeatBuddy, other drum machines, effects, and more.

Additionally, it is compatible with any external expression pedal.

I/O: two 1/4" (6.35 mm) inputs, two 1/4" (6.35 mm) outputs, one 1/4" (6.35 mm) stereo aux input, one 1/4" (6.35 mm) stereo aux output.

9v (center negative), 360mA power supply included.

4.3" (109 mm) touch-enabled display.

Small form factor: 7.8" x 5.6" x 2.2" (198 x 142 x 56 mm).

Lightweight: 2lbs 4oz (936 g).

Aluminum construction with chip resistant black coating.

Requires Male to Male MIDI Cable for connecting to the MIDI Maestro and Male to Male MIDI Cable as well as MIDI Breakout Cable for connecting to the BeatBuddy

Notes: The BeatBuddy is a drum machine in a stompbox, or a drummer pedal for short. Use this drum pedal for guitar and many other instruments. Further, we've meticulously recorded professional drummers and paired their samples with an algorithm that results in the best sounding drum machine you've ever heard.

In addition to being the most realistic drum machine on the market, it's also the easiest guitar drum pedal to use. That is to say, there's no fussing around with sequencers, and controlling the beat during a live performance is as easy as stomping on the pedal to add fills, transitions, and outros.

Notes: With the BeatBuddy MINI 2 Drummer Pedal, use your foot to take full control over your drummer including transitions, fills, intros, and more.

The ergonomic button makes this drummer pedal perfect for playing or jamming out when wearing socks (or barefoot)!

Over 200 styles and samples of professional drummers result in a versatile and organic feeling drum machine.

The BeatBuddy MINI 2 drummer pedal is a more compact and affordable version of the award winning BeatBuddy drummer pedal. It's used by School of Rock, Taylor Robinson Guitar, Frost School of Music (University of Miami), and more as a tool for efficient and engaging practice.

The ability to play along with beats sampled from professional drummers and control them with nothing but your feet will help you improve your musical talent faster than ever before. Most importantly, the fun you'll be having along the way will keep you coming back for more.

Notes: When you pair the Footswitch+ with the BeatBuddy or BeatBuddy MINI it gives you even more control over the beat. Right out of the box you get the ability to trigger accent hits, pause/unpause the beat, and navigate songs, genre, and tempo. However, when used with the BeatBuddy, you can do even more with the Footswitch+ like setting it to act as the main pedal.

But, it doesn't stop there! The Footswitch+ is hands down the best multipurpose 2 button footswitch on the market. It's built like a tank, is more comfortable than a footswitch has any right to be, and offers quiet, momentary switches.

Notes: In the age of digital recording people often reminisce about the golden days of analog tape and the warmth of those spinning tape reels. Many people have spent a lot of money trying to re-create those classic tape like qualities in pieces of hardware.

Dan Snazelle of SNAZZY FX missed something else about tape - the sound that would come out of the stereo on those days when the tape got stuck in the machine, dying a slow and melodic death. He also missed the magic of playing a favorite recording through an old cassette boom-box that had so much warble it was hard to tell what song he was listening to. So Dan decided to design a device that, when pushed to its limits, would sound like the tape was spinning out of control. But he also wanted to make sure the box could take that sound and make it more musical, and, at times, more subtle too.

THE WOW AND FLUTTER can bring you into this warbly world and far, far, beyond.

You might be thinking, what am I going to do with a busted tape machine? Well, that's where things really get interesting - because this box can be used in many, many ways. Depending how hard you hit the Threshold and Warp controls, you can dial the malfunction back to where it creates subtle vibrato, or with shorter delays you can achieve pleasing chorus or pseudo flange-like effects. Turn the Warp up a bit more and you can get far-out pitch shifting, rubber band delays, and plastic portamentos. Turn the Warp up to max and what you'll hear is just plain insanity.

THE WOW AND FLUTTER is an incredibly versatile device. It is certain to add an extremely unique texture to your playing or your productions. Run stems or mixes through it to add an out-of-this-world quality. Thicken up synth parts in an instant or use it on vocals to add mystery. With your guitar you will be amazed at how many different colors can be achieved with just this one box.

Notes: While the Western world was preoccupied with smooth and soulful Fuzz Faces and Muffs, the Orient was bubbling up with gnarly mystical fuzzes, heavily imparted with earthshaking Godzilla DNA. This very distinct era in fuzz history gave us many treasures that have been rightfully crowned fuzz legends: the Univox Super Fuzz, Ibanez Standard Fuzz, Ace Tone Fuzz Master, Shin-Ei Companion and several others.

Just like its predecessor, the SolidGoldFX 76 MKII offers up a comprehensive guided tour to the best that the Standard Fuzz and its ilk has to offer without any of the drawbacks. On face value, the improved 76 MKII gives you a multi-voiced fuzz unit that offers loads of octave-up snarl and clang, at the same time as ruthlessly pummelling your amp with hair and fangs, while the top mounted jacks and new JFET Preamp stage all helps to make the pedal easily fit into any modern setup.

Armed with a JFET input and built around a specific set of Toshiba transistors, the 76 MKII's dual Texture and Colour tone controls allow you to precisely sculpt your fuzz while the octave switch allows you to dial back the octaves and overtones for a smoother finish.

All of this translates to a surprisingly varied and delicious fuzz feast, with everything from stabby robotic clangs, synthetic soaring leads, absolutely crushing doom chords as well as more warm and enveloping drives just a single stomp away.

Topped off with silent, soft touch true bypass switching and top jacks, the 76 MKII is everything you need if you're looking for a musical yet powerful fuzz capable of levelling Tokyo! Here's to the new Standard Fuzz.

Notes: The AURRAS Optical Vibraphase by SolidGoldFX is a powerful effects pedal named after the goddess of sound that meets the legacy of its predecessor the Athena Vibraphase in a harmonious blend of legendary, vintage Uni-Vibe textures and innovative, modern prowess.

Rich, Energetic Soundscapes

AURRAS Optical Vibraphase is a 2-stage asymmetric phase shifter built around a pair of selected and individually controlled opto-isolators offering a clearer signal with minimal distortion while simultaneously isolating the audio path from any possible LFO interference.

The dual LFO setup, powered by a microprocessor, provides limitless sonic flexibility. Drawing inspiration from albums such as Band of Gypsys or the Dark Side of the Moon, the AURRAS delivers the lush modulation and heavy pulse that have shaped Rock & Roll history.

With its dual LFOs, expression pedal input, adjustable dry mix control, and offset combined with Speed, Depth and Level knobs, AURRAS transcends eras with a rich tapestry of intriguing, lush liquid soundscapes. While the AURRAS features a 100% analogue audio path from input to output, it takes advantage of precise digital controls, offering soft-touch relay-based true bypass switching, on-board tap tempo and speed ramping.

Comprehensive Tone-Shaping Controls

With its dual LFOs, expression pedal input, adjustable dry mix control, and offset combined with Speed, Depth and Level knobs, AURRAS transcends eras with a rich tapestry of intriguing, lush liquid soundscapes.

While the AURRAS features a 100% analogue audio path from input to output, it takes advantage of precise digital controls, offering soft-touch relay-based true bypass switching, on-board tap tempo and speed ramping. Set your effect with the Speed knob, Expression Pedal, Tap Tempo, or by using the Ramp function. You can ramp up your LFO speed by simply holding the Tap Tempo footswitch, which will automatically ramp up to double your speed.
You can also ramp down your LFO speed by simply holding down the Bypass Footswitch. This will automatically decrease your speed to half. Repeat this process as many times as you'd like to achieve the desired speed.

Let's talk about LFO Offset

AURRAS runs on a pair of opto-isolators each operating on an independent LFO. While most Phaser or Modulation pedals use a single LFO to create their effect, independent LFOs can open a new array of effects by offsetting their symmetry.

The OFFSET ADJ knob and OFFSET MODE FREQ|PHASE knobs work in tandem. For a more conventional effect, turn the OFFSET ADJ mode fully counterclockwise, allowing both LFOs to be in sync with no offset.

The FREQUENCY OFFSET adds rhythmic patterns by slowing down the second LFO, while the PHASE OFFSET fine-tunes the throb by introducing asymmetry between the LFOs.

Notes: The BETA-V from SolidGoldFX is a Bass Preamp pedal that kicks! This latest incarnation of SGFX's top selling Beta Series is designed to capture the warmth and grit of favorite vintage tube amps. You know, that distinctive drive and tone that seems to be lacking from much of today's modern bass amplification.

Yes, we all know the convenience of a lightweight "sub 10 lbs" bass head that pumps out 500 watts and a neo cab that doesn't require a roadie crew or chiropractor is great, but there is something extremely satisfying in the way that big, old Ampeg-style tube setups compress, clip and round out your signal. However, with the BETA-V you can finally have the best of both worlds - bone-shaking mojo-packed dirt, all wrapped up in modern and easy to use convenience.

Solid Gold FX's classic Beta bass architecture has been reworked and expanded, delivering a wider range of tones. The low-pass filter now has 2 settings for bumped or scooped-mids as well as a centre bypass setting for a more transparent experience. Plus, the Drive control has been reworked for lower gain applications or hotter basses.

Most importantly, the BETA-V sports an active 2-band post gain EQ allowing you to boost or cut your highs and lows with a flat response in the centre. Dialling in anything from punchy overdriven Lemmy tones to the fattest, deepest soul shaking dub is only a few knob twists away. Complete with top-mounted jacks, soft touch true bypass switching and 9-18 V DC operations, the BETA-V is a true thump machine, ready to rock your world.

Notes: SolidGoldFX EM-III- Compact Delay Powerhouse

Welcome to the new SolidGoldFX EM-III Multi-Head Octave Echo; the smallest, most powerful and by far the most versatile SolidGoldFX delay pedal to date.

Building on SGFX's Electroman Delay legacy, the EM-III manages to both echo the past, present and future. With EM-III's wide-ranging yet ultra-intuitive control set, warm analogue-voiced echoes, precise and modern delay, as well as experimental and futuristic sound designs, are all just a single stomp away.

At your feet (or fingers) you have a multi-head tape style echo, with the ability to add in a signal an octave lower to the primary delay head. This can result in dancing, rhythmic delays with body and gravitas, as well as bold washy soundscapes. These two core features are controlled via a single mini-toggle. Flick it left to select between 1, 2 or 3 delay heads or flick it right to toggle the octave effect on and off. From there, just set your Delay Level, Repeats and Time via the knobs or tap in your preferred tempo via the soft-click tap tempo switch and let the good echo times roll.

The EM-III also sports delay modulation introduced via the Flutter control. Keep it at centre position for no modulation. Dial it left for a slow and dreamy chorus-like modulation or right for a faster vibrato, letting you create lush oceanic movement, tape-style crinkles, eerie tension and beautiful dissonance.

The colour knob allows you to engage both high-pass and low-pass filtering. Dead-centre you have a pristine full-frequency digital delay.

Dial it to the left and you cut the highs, creating warm, murky analogue-esque repeats. Dial it to the right and you suck out the lows for crisp and bright tape-style repeats or super thin lo-fi delays.

EM-III also brings interactive warp and glitch features to the tonal table by pressing and holding either Tap, Bypass or both at the same time. Hold Tap to increase the repeats until self-oscillation, creating a swelling wall of sound. Hold Bypass to replicate the sound of a tape motor on the fritz and a tape reel snapping, or hold both for glorious noise seances that will act as the perfect song/set closer.

Additional features include soft-touch, relay based, true bypass switching with the option of buffered trails, top jacks and up to a full second of delay time.

Designed to inspire and evoke emotion, EM-III can sound as pretty and cheerful or as dark and macabre as you wish.

Tune up, plug in and immerse yourself in the EM-III experience.

Notes: A typically unique take on multi-effects from Soma, designed to induce meditative states. Hybrid analogue-digital delay/reverb/granular processing gives a range of creative approaches.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: Atlas Compressor

The Atlas Compressor offers a comprehensive collection of compression circuits that perfectly capture the tone and feel of the industry's most sought-after compressors. Straight out of the box, Atlas delivers six different styles of compression, ranging from classic stompbox compressors like the now-discontinued Diamond Optical Compressor to high-end rack units such as the snappy 1176 compressor and the smooth and gentle LA2A optical compressor. Atlas also features advanced dual-band compression, which provides an independent set of controls for both the high and low frequencies. Each compression engine has onboard controls for Threshold, Ratio, Attack, Release, Output, Tone, and Blend, allowing for fine-tuned control over the compact One Series hardware.

A History Lesson in Compression

The Atlas is packed with so many different types of compression that it could serve as a tour guide through the history of compressor equipment. First stop: classic stompbox squashers such as the legendary the Dan Armstrong Orange Squeezer and the excellent (but discontinued) Diamond Compressor. Next stop: universal and ubiquitous studio rack gear like the smooth and gentle LA2A optical compressor and the ultra-responsive 1176 FET compressor. Finally, we're taking you to all-out nerd territory with Peak, RMS, VCA, and Dual compression, and an onboard Expander circuit... the Atlas has it all and does it well.

Optical Rack

The Optical Rack compressor engine is based on the legendary LA2A studio opto compressors from the early 60s. Optical compression controls its output level with light. Increasing the incoming audio level in the original units caused an electro luminescent panel to shine brighter. A photo resistor monitors that light panel and decreased the audio output level, as the panel got brighter. The result is a very smooth and gentle attack that imparts a full-bodied and natural sound on guitar, bass, or vocal. This compressor sounds great with clean strummed or arpeggiated guitar lines as well as acoustic guitars.

Studio 76
The Studio 76 compressor is based on the 1176 studio rack compressors of the late 60s and early 70s. This solid state FET compressor is known for its full body and super-fast attack. All of the attack times in 1176 compressors clock in at less than a millisecond. Studio 76 is a great compressor for fast and aggressive country pickin' (think Johnny Hiland), slap bass, slide guitar and much more.

Cubic Zirconia

The Cubic Zirconia was inspired by opto compressors that use an LED in place of the LA2A's electro luminescent panel. This technology is usually what you find inside effects pedals. Using an LED as an optical compressor's light source creates faster attack and release times, which generate artifacts that tend to make the compression sound a bit dirtier. This is a great sound for playing tight and funky riffs on the guitar.

Studio snap

A very aggressive and modern sounding compressor. It's based on hard-knee, VCA feed forward type compressor. It uses two compressors in parallel to handle both RMS level controls ("Root Mean Square" compression means that the compressor will react according to the "average loudness") AND the peaks. The combination of these two compression approaches gives STUDIO SNAP its character.

Dual band

The Atlas has two independent compressors that can be routed in a number of different ways. They can run in Series Mode (one running into another). They can also run in Parallel Mode and be mixed together with a Crossfade control. The Dual Band compressor runs in Band Split Mode, which is a version of parallel routing where one compressor controls only the higher frequencies (everything above 333Hz) and the other controls the lower frequencies (everything below 333Hz). With the Dual Band Compressor the high frequencies release faster than the lower frequencies, so as you sustain a chord the low frequencies remain compressed while the second compressor releases the high frequencies. The result is a beautiful blooming effect that accentuates high harmonics. This is a great compressor for slow ringing chords or lead lines with long sustained notes.

Includes 9v DC power supply (300mA / Negative Tip)
Includes 1/8" to 1/4" cable for Neuro Mobile App connection.
Power Consumption - 165mA
USB port - Connects to Mac or Windows PC for firmware updates and the forthcoming in-depth effects editing software.
Brushed anodized aluminum housing.
Dimensions: L: 4.5 in./11.4cm x W: 2.75 in./7cm x H: 2 in./5.1cm (including knobs)

Notes: The best delay and reverb programs from the Nemesis Delay and Ventris Dual Reverb are combined to create a potent, versatile new pedal. Create soundscapes and ambiences from vintage effects to modern experimentalism.

Supplier's Notes:
Design complex soundscapes in seconds with the Collider Delay+Reverb. Source hand-picked 12 standout delay and reverb effects from the award winning Nemesis Delay and Ventris Dual Reverb, and put them together in one compact housing with massive power and dead simple control. The Collider's intuitive control surface makes it easy to mix-and-match any two-engine combination of delay and reverb. Dual footswitches provide individual Engage/Bypass control over each effect, making it a perfect choice for live performance.

The Collider offers an exceptional collection of rich, spacious tones, including realistic reproductions of vintage Analog, Tape, and Oil Can Delays, classic models of Spring and Plate Reverb, natural replications of large and small acoustic spaces, and an intriguing and highly musical selection of "unnatural" tones including a tripped-out Reverse Delay and an other-worldly Shimmer Reverb.

Collider takes supremely high-end delay and reverb effects and offers them in a sleek and powerful design with massive processing muscle and clean functionality. The Collider features two completely independent 56-bit signal processors, essentially housing a high-powered reverb AND a high-powered delay pedal in a single box. This means that it is possible to create magnificent tones with any two-effect combination of delay/reverb, delay/delay, or reverb/reverb.

This extremely versatile pedal offers a long list of useful features, including analog dry through, stereo inputs and outputs, the option of true or buffered bypass, 8 user presets (or 128 with MIDI), full MIDI functionality, delay tap tempo, reverb hold (a.k.a. "freeze"), external expression capabilities, external preset switching capabilities and extra editing and signal routing options via the Neuro Desktop and Mobile App Editors.

The sound engineering team of Bob Chidlaw and Jesse Remignanti were relentless in their pursuit of perfection with each and every one of the Collider's delay and reverb effects. Whether it's beautifully capturing every minute detail of vintage units or bringing exceptional depth and richness to the contemporary effects, the Collider delivers excellence.

Includes 9v DC power supply (300mA / Negative Tip)
Includes 1/8" to 1/4" cable for Neuro Mobile App connection.
Power Consumption - 300mA
USB port i Connects to Mac or Windows PC for MIDI control of firmware updates.
Brushed anodized aluminum housing.
Dimensions: L: 4.5 in./11.4cm x W: 4.5 in./11.4cm x H: 2 in./5.1cm (including knobs)
Weight: 1 lb./0.45 kg.

Notes: Updated version of Source Audio's excellent Nemesis delay features an all-analogue dry signal path, meaning your original signal passes through unadulterated. Same versatile delay options, including patches based on vintage and modern hardware.

Supplier's Notes:
The NEMESIS Delay ADT is an updated version of Source Audio's award-winning NEMESIS Delay. It has all the tones and features that made the original NEMESIS so popular and includes some key updates including an analogue dry through signal path.

Analogue dry through means that the guitar's dry signal maintains a 100% pure and unprocessed analogue signal adding only the delay you choose. Other new features include enhanced MIDI functionality, 100 factory loaded presets, and an updated collection of delay effects easily accessible with the pedal's intuitive interface. The updated NEMESIS is also compatible with over 1,000 Neuro user presets created for the original NEMESIS Delay.

Additional NEMESIS Delay ADT features include stereo ins & outs, full MIDI functionality with 5-pin MIDI DIN and through ports, tap tempo with 15 different beat divisions, 8 onboard presets (128 with MIDI), bypass trails, external expression control, and a delay "freeze" function engaged by holding down the tap tempo footswitch.

NEMESIS Delay ADT captures the full spectrum of delay effects, starting with a comprehensive collection of meticulously crafted vintage delay tones. The Source Audio engineering team spent over a year studying numerous iconic and sought-after tape and bucket brigade delay units with a staunch dedication to identifying their every nuance and idiosyncrasy. At the opposite side of the spectrum, you'll find an advanced collection of sophisticated and specialized delay effects.

In addition to the basic 12 delay engines available on the front panel, the NEMESIS Delay ADT also features 12 extended delay engines for a total of 24 engines in all. These additional "back 12" effect engines offer a variety of tonal options and can be selected using the Neuro App or via MIDI. Any of these effects can be used to overwrite the default effect engines on the effect dial or can be stored as user presets.

Job one in the development of the NEMESIS Delay ADTwas to create a flexible, easy-to-use, and great sounding delay pedal. Out of the box, that's exactly what it is - plug in, select from the twelve onboard delay engines and make beautiful music... simple. But there is much more here than meets the eye - the truly "Big Idea" behind our One Series pedals was to give musicians a second, far deeper, set of options and editing tools with which to craft the perfect tone. The Neuro Desktop Editor and Neuro Mobile App are free downloads for iOS, Android, Mac, and Windows.

Additional parameters found in Neuro include Diffusion, Distortion, Wow and Flutter, Advanced Filtering, Sample Rate Reduction,12 different Tap Tempo Beat Divisions, Polyphonic Pitch Shifting and much more. Neuro's complete collection of delay effects includes "Sweeper" (a modulated filter delay), "Degrade" (with sample rate reduction), "Sequenced Filters," "Warped Record", "Chorus," and more.

Customized presets can be published to the cloud and made accessible to the entire Neuro Community. To date there are well over 8K published presets available for One Series pedals in Neuro. After editing your preset, burn it directly to the pedal and access it easily without reconnecting the Neuro App.

Notes: The Nemesis Delay is the culmination of three years of intense research, listening, and engineering. The mission was to create a compact, powerful, and easy-to-use delay pedal with unrivaled tone, flexibility, and style. Nemesis offers 26 distinct effect engines ranging from vintage tape and analog delays to highly advanced pitch-shifting, reverse, filter modulating, and rhythmic delays. It also features 128 presets, multiple delay taps, a hold function, tap tempo, full MIDI control, deep editing functionality with the Neuro Mobile App, and much more.

Nemesis captures the full spectrum of delay effects, starting with a comprehensive collection of meticulously crafted vintage delay tones. The Source Audio engineering team spent over a year studying numerous iconic and sought after tape and bucket brigade delay units with a staunch dedication to identifying their every nuance and idiosyncrasy. The Nemesis's Tape, Noise Tape and Slapback delays capture all the characteristic flutter, warmth, and color that give vintage tape delay machines like the Echoplex and Space Echo their classic charm. The Analog delay engine beautifully achieves the resonant peaks combined with high and low frequency decay that typifies classic bucket brigade delay pedals. The pedal's Digital delay manufactures pristine, high definition repeats with or without filtering effects for a classic rack-system tone.

At the opposite side of the spectrum, you'll find an advanced collection of sophisticated and specialized delay effects. The Shifter delay generates perfect polyphonic pitch intervals with repeats jumping to either an octave (up or down), major or minor third, 4th, or 5th. Sweeper applies modulating filter effects to repeats for a unique delay/wah hybrid tone. Backwards effects like Helix and Reverse provide a perfect blend of chaos and control with multi-tap reverse patterns and angelic pitch shifting effects. A Rhythmic delay features an engaging and musical collection of non-standard multi-tap delay patterns.

The 12 engines included on the face of the Nemesis represent a perfect cross section of delay effects, from classic essentials to the highly progressive. But don't stop there, we strongly recommend connecting your Nemesis to the Neuro Mobile App or Neuro Desktop Editor and checking out the 14 additional delay engines not accessible with the effect selector knob. Click the links below for deep-dive videos on some of these bonus delay effects, plus a closer look at the original 12.

Includes 9v DC power supply (300mA / Negative Tip)
Includes 1/8" to 1/4" cable for Neuro Mobile App connection.
Power Consumption - 200mA
USB port - Connects to Mac or Windows PC for MIDI control of firmware updates.
Brushed anodized aluminum housing.
Dimensions: L: 4.5 in./11.4cm x W: 4.5 in./11.4cm x H: 2 in./5.1cm (including knobs)
Wieght: 1 lb./0.45 kg.

Notes: Not just another reverb pedal. The Ventris's party trick comes from its dual stereo reverb engines, allowing for smooth switching between presets. Top quality 56-bit processing and 14 different modes.

Supplier's Notes:
Create rich, spacious reverberations with the Ventris Dual Reverb. The Ventris features 14 meticulously crafted reverb engines built on two completely independent 56-bit signal processors, essentially housing a matching pair of high-powered, stereo reverb pedals in a single box. The pedal's dual DSP architecture provides massive processing muscle, adjustable preset spillover time, and advanced dual reverb effects. Step into a vast realm of ambient space.

The supremely intelligent Ventris Dual Reverb features two completely independent 56-bit reverb processors, essentially housing a matching pair of high-powered reverb pedals in a single box. The Ventris's powerful dual processing architecture gives the pedal some serious advantages including massive processing muscle, adjustable preset spillover time, and the ability to create dual reverb effects.

The power to combine two reverb engines truly expands the pedal's ambient possibilities. Run dual reverb effects in a parallel or cascading signal path, or split your reverbs and send a different effect to each of the pedal's two Outputs.

Massive Processing Power: Dual processing eliminates bloated all-in-one reverb programs. Instead of being forced to allocate 5% of the processing power to something vital and complex like the True Spring reverb, we can now dedicate 100% of the processor, opening the door to a new frontier of realism and sonic exploration.

True Spillover: Seamless "spillover" from one preset to the next is an enormous advantage in live situations. Switch from one reverb preset to another without abruptly cutting off the trail of the previous effect. And, the dual reverb engines make it possible to program (with the Neuro Desktop Editor) the decay rate of the first reverb trail.

Source Audio's two man engineering team of Bob Chidlaw and Jesse Remignanti took extreme care in crafting the Ventris Reverb's exceptionally spacious tones, covering all the bases from beautifully natural reverberations to haunting "unnatural" tones. The Ventris Dual Reverb includes 12 onboard reverb engines as well as an ever-expanding collection of reverb effects available via the Neuro Mobile App or Neuro Desktop Editor. Click the boxes below for details on each engine.

The True Spring engine is the perfect example of the Source Audio engineering team taking full advantage of the Ventris Dual Reverb's immense processing might. True Spring flawlessly captures all the subtleties and idiosyncrasies of classic spring reverb equipped amplifiers, including the characteristic "drip" associated with the vintage effect. Spring reverb simulation was a major challenge, requiring a deep understanding of the physical characteristics of reverb springs, advanced experience in sound design, and exceptional processing power. Chief Scientist Bob Chidlaw drew upon all his knowledge and experience in the creation of the True Spring engine, from his days as head engineer at Kurzweil to the creation of Source Audio's Soundblox 2 Dimension Reverb. The result is a supremely natural sounding reverb effect.

Includes 9v DC power supply (400mA / Negative Tip)
Includes 1/8" to 1/4" cable for Neuro Mobile App connection.
Power Consumption i 280mA
Brushed anodized aluminum housing.
Dimensions: L: 4.5 in./11.4cm x W: 4.5 in./11.4cm x H: 2 in./5.1cm (including knobs)
Weight: 1 lb./0.45 kg.
Maximum Input Level: +6.54 dBV = 8.76 dBu = 2.12 V RMS = 6.0 V p-p
Full Scale Output Level: +6.54 dBV = 8.76 dBu = 2.12 V RMS = 6.0 V p-p
Input Impedance: 1 MegaOhm (1 M?)
Output Impedance: 600 Ohm (600 ?)
110 dB DNR Audio Path
24-bit Audio Conversion
56-bit Digital Data Path

Notes: The ZIO Analog Bass Preamp + DI is an ultra-low noise, all-analogue preamp and DI for bass guitar. The pedal offers maximum headroom and a simple but flexible set of tone shaping controls. ZIO Bass can be used as a direct input using the balanced XLR output for connection to a mixer or audio interface as well as with headphones through its dedicated headphone jack.

The ZIO Bass features a simple control panel. The OUTPUT knob offers +12db of additional boost plus a significant amount of cut. The BASS and FOCUS controls work best in tandem - use the BASS knob to increase low-end output and the FOCUS knob (which adjusts the cut-off point of a high-pass filter) to eliminated excessive lows and create added punch. The TREBLE knob boosts or cuts the high frequencies, providing enhanced articulation without adding harshness.

The GRIT toggle enables a mild distortion to mimic the transformer-style breakup from high-end bass amps. GRIT mode's gain level can be adjusted for more or less distortion with the GAIN control located on the side of the pedal. The SCOOP toggle engages a special midrange cut to clean up "muddy" mid-range frequencies. The SCOOP profile is based on the "Pultec Trick" - a setting commonly used with vintage Pultec Equalizers to add clarity.

The pedal has three outputs that can be used individually or simultaneously. The OUTPUT jack connects to an amplifier or pedalboard.

The DIRECT OUT is a balanced XLR output that sounds great running into a mixer or audio interface for recording or live sound applications. The HEADPHONE jack features a high dynamic range, low noise amplifier that is capable of driving low impedance studio headphones.

Notes: Great for live performances! The Cosmic ECHO Squared is an analogue-sounding LoFi delay that will work with just about anything you plug into it.

The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. Our take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 stomp switches, Blast and Warp.

The "Squared" version of the pedal is tailored to live guitar and keyboard performers. It has all the features of the original plus:

Expression pedal input over Rate
Warp and Blast ("Zone" on the Cosmic Echo) are now momentary stomp switches
Blast amount knob now accessible externally

Features:

Dark, rich sounds with the analogue vibe of a tape echo.

Uses the PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Delay length: 30ms-1,250ms

4 knobs: Feedback, Mix and Rate, Blast Amount. The Mix is a wet-only control that attenuates the amount of delayed signal in the signal chain. The Rate controls the number of repeats in an organic-sounding way.

Warp button: Stomp switch that gives a bright, "small speaker" tone.

Blast button: Stomp switch that introduces feedback into the circuit momentarily. Great for adding rhythmic feedback and other strange sounds. The Blast intensity is adjusted with the Blast Amount knob.

Pedal may have a slight volume drop.

Great for shoegaze, surf rock, ambient and experimental sounds.

Pedal uses a 1590XX case.

Dimensions (L x W x H): 5 3/4" x 4 3/4" x 2 1/8" (146mm x 121mm x 54mm)

Takes a 9V battery or 9V centre negative 2.1mm barrel power supply (not included)

Notes: The Cosmic ECHO is an analogue-sounding LoFi delay that will work with just about anything you plug into it.

The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. Our take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.

Dark, rich sounds with the analogue vibe of a tape echo.

Uses the PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Delay length: 30ms-1,250ms

3 knobs: Feedback, Mix and Rate. The Mix is a wet-only control that attenuates the amount of delayed signal in the signal chain. The Rate controls the number of repeats in an organic-sounding way.

Warp button: Momentary pushbutton switch that gives a bright, "small speaker" tone.

Zone button: Momentary pushbutton switch that introduces feedback into the circuit momentarily. Great for adding rhythmic feedback and other strange sounds. The Zone amount can be adjusted by an internal trim pot.

Pedal may have a slight volume drop.

Great for shoegaze, surf rock, ambient and experimental sounds.

Pedal uses a 125B case

Dimensions (L x W x H): 4 7/8" x 2 5/8" x 2 3/16" (124mm x 67mm x 56mm).

Takes a 9V battery or 9V centre negative 2.1mm barrel power supply (not included).

Notes: The Face The Fuzz is a modern take on a classic sound, modeled after the Dallas Arbiter Fuzz Face but with some important upgrades and modifications. Get the original Germanium PNP transistors for that classic tone just like the likes of Jimi Hendrix, Duane Allman, and George Harrison played!

What is the difference between Synthrotek's two fuzz pedals: Face the Fuzz and the Arbiter Fuzz Face Clone? The Arbiter Fuzz Face Clone uses the classic circuit that is known and loved by many, and everybody loves a classic. The Face the Fuzz pedal has been designed with a few key changes to make it more useful to the modern musician: a wider frequency response, the ability to daisy-chain the power with a 1 Spot, and the option to use temperature-stable Silicon transistors.

The Face The Fuzz comes with hand-tested and selected premium AC128 NOS PNP transistors. All of the AC128s for optimum gain and leakage current so that they are guaranteed to bias properly and sound great! Lower gain transistorshave been chosen for Q1 and higher for Q2 according to strict standards. Be assured that you will be playing a premium product that takes the guess work out of Germanium transistor testing.

Notes: Synthrotek's original Mean Screamer Pedal goes way beyond a typical tube screamer clone with a couple of great mods. An original 4558 OP-AMP IC has been used to give it that beautiful classic boost.

Notes: Kruel is a Fuzz built with mostly vintage components, around 2 Germanium NPN transistors.

The Pedal is pretty versatile with tone correction and a master volume. Thick and voluptuous tones can be achieved, and it can add warmth, sustain, and character to a guitar's tone... Great for power chords and for guitarists looking to add depth and texture to their playing.

NPN Germanium Colored Fuzz
True Bypass
NOS components
Made in France

Notes: Mar Karit is a tube pedal preamplifier.

It contains 2 tubes, one NOS EF86 for the preamp section and one 6J1P (6ak5) for the buffer output. It is an all tube Preamp.

It runs on a 9V power supply (center positive) - and operate internally at 35volts. Furthermore, it produces a warm, rich, and full-bodied sound, and can capture both the softest and loudest sounds with great accuracy and clarity.

Pushed a little too far, it can produce pleasing harmonic distortions and warm saturations. The two volume knobs control the level of each stage.

All tube preamp
EF86 and 6J1P
High end components (Nichicon, Panasonic caps, Alpha pots and Switch, Rean Jacks...)
Made in France
True Bypass
9V DC / input power supply positive tip

Notes: How It Works

Chaining up an EQ, compressor and overdrive pedal will never give you the same result as SkarBassOne achieves, not by a long shot! The precise filters in SkarBassOne is what gives you the extremely surgical tone and the wide range of possibilities without breaking a sweat!

No matter the settings you will always keep the clean powerful low end with this multiband overdrive and that is a must for bass. Controlling the mids of a bass sound has never been easier! You will get out of the way from other instruments masking frequencies and take up all the space that is ment for you and ONLY you!

It might look simple on the outside, but I assure you the inside is a matrix of years with development. The flexible multiband drive is smooth all the way thru it's range and I promise you it will never ever mess with your low end!

Details

Compression:

One knob FET compressor with fast attack and release. It handles dynamics with ease and creates a solid wall of tone.

Compression LED:

Visual indication of how hard the compressor is working.

Mid:

Mid filter to achieve the surgical studio tone! Create a defined, in the pocket frequency response for the bass to sound massive and to make it sit with other instruments. Your band mates will never beg you to turn down your bass again!

Mix:

Quickly set the tonal balance between low frequencies and high frequencies. Find the sweet spot in any situation.

Footswitch:

On/Off switch for Drive and Tone.
Red channel =Drive and Tone active.
Blue channel = Drive and Tone off.
Compression, Mid and Mix is active on both channels.

Drive:

Set the amount of multiband drive, from gentle push to full on bark!

Tone:

Hi-cut filter to control the high frequencies of the output.

Notes: Experience - Fuzz Octave

Experience is a unique Fuzz & Octave up pedal that was designed to revive the sounds of the 60's and 70's with a modern touch.

It features 2 stand-alone channels in series (fuzz and octave) which can be used individually or together, offering a wide range of dirty goodness!

The Octave channel produces a classic and easy to manipulate octave up effect, sitar & harmonica like sounds, enhancing your tone with ringing octaves and micro-phonic feedback at the end of every note. It features separate volume and tone controls for a wide range of colours.

The fuzz channel is based on the Jordan Boss Tone fuzz circuit and is capable of producing a wide range of tones. From mild and creamy overdrive and classic fuzzy tones, all the way to heavily distorted goodness with sub octaves, similar to trombone and analogue synth! It is equipped with 2 vintage silicon transistors with FET clipping for richness and detail and four controls (gain, volume, tone and damage) with which you can adjust the type of distortion.

Combining the 2 channels is where the real Experience begins! Create your signature sound exploring the Experience's endless tonal capabilities!

Unleash your creativity and let the Experience do the rest...

Product Height (cm): 5.400
Product Width (cm): 10.200
Product Depth (cm): 12.400
Product Weight (kg): 0.360

Box Height (cm): 6.000
Box Width (cm): 1.000
Box Depth (cm): 14.800
Boxed Weight (kg): 0.445

Notes: Galactic - Multi Modulation

With the Galactic, Tsakalis wanted to create a unique modulation pedal which, lets you combine effects and blend them in a way that brings new textures to your sonic arsenal and creates potential for exploration!

The Galactic has five basic modulation effects - Phaser, Univibe, Vibrato, Rotary Speaker and Flanger - and made it possible for you to use them separately or in pairs, blending them together via a Blend control creating interesting effects from 3D chorus to many other spacey and yet to be named soundscapes. Find your sweet spot for each pair and discover an unexplored Galaxy of sounds and inspiration!

Three expression input jacks let you control the Speed and Depth of the effects, as well as how you choose to Blend them, making your live performance easier and letting you experiment even on stage!

Use the Galactic modulation to enrich your music with the sounds of the unknown!

Product Height (cm): 5.200
Product Width (cm): 12.700
Product Depth (cm): 9.900
Product Weight (kg): 0.369

Box Height (cm): 6.000
Box Width (cm): 1.000
Box Depth (cm): 14.800
Boxed Weight (kg): 0.448