Back catalogue: All genres

Notes: Are you one of those people who loves to combine sports with music, or psych yourself up during your preparations with some of your favourite tunes? Do you feel the music's incredible power? It's amazing how much music can motivate you, pump you up, steel your nerves, and push you to exceed your limits. When you're involved in a sport (an extreme sport, no less), music pushes the boundaries of what you're doing, and boosts the intensity of your performance: you're literally pushed forward by the rhythm. Whether it's while you're preparing your gear, during your training sessions or once you're done performing or competing, music fires up your courage and multiplies your strength. Through working closely with and for extreme sports athletes, Hercules have designed and developed a super-practical, powerful and rock-solid speaker. It's been specially designed to meet your needs and equal your passion, no matter what type of environment you find yourself in - it's totally at home out on the water, in the city, or in the woods. Say hello to the Hercules WAE Outdoor 04Plus FM speaker.

Wireless streaming via Bluetoothr wireless technology

Take your wireless music experience to the next level with Bluetooth 3.0 A2DP wireless technology, and stream from any compatible Bluetooth device.

Built-in FM antenna for total freedom

Unique: don't feel like taking your smartphone with you, or is your phone's battery almost dead? Now you can enjoy listening to music in any situation thanks to the built-in FM tuner: total freedom and unlimited musical discoveries are yours! Geolocate the FM stations around you, anywhere in the world. Enjoy non-stop music, even without a smartphone."

IP67 certified for extreme conditions

Completely IMMERSION-RESISTANT (the Hercules WAE Outdoor 04Plus FM speaker can resist immersion in water up to 1 meter deep for 30 minutes without any problem) and DURABLE (it resists sand, mud and even the finest dust particles).

The speaker's sturdy design, solid rubber end-pieces, protective metal grille, and reinforced access hatch for connectors ensure excellent shock-resistance, as well as resistance to extreme use conditions, making it every rider's best friend."

Stereo
Small but powerful, the Hercules WAE Outdoor 04Plus FM pumps out clear, powerful stereo sound, optimized for outdoor conditions (wind noise, and other ambient noises). It features a single-unit 2.0 speaker and a passive decompression driver, making this remarkable sound quality possible.

Specifications:

Bluetooth 3.0 A2DP wireless technology
Total output power: 10 W peak power
Single-unit 2.0 speaker + passive decompression driver
Frequency response: 130 Hz - 20,000 Hz
Built-in rechargeable 3.7 V 1500 mAh Li-ion (lithium-ion) battery
IP67 certified
Battery life: from 10 to 18 hours
3.5 mm mini-jack auxiliary line input
Magnetically-shielded system won't disturb your surroundings
RoHS compliant product

What's in the box:

1 x Hercules WAE Outdoor 04Plus FM speaker
Cables
1 wrist strap
1 micro-USB to USB cable
Instructions
1 user manual

Notes: We're familiar with IsoAcoustics' highly effective line of monitor isolation stands that seem to bring out the best from any speaker. NAMM 2017 will see IsoAcoustics release the new Iso-Puck - the same concept as the bigger stands, yet in a low-profile, flexible, scalable version. The little puck-like discs are placed under your speaker to isolate them from the surface they're sitting on.

An Iso-Puck is pretty small - just 3cm tall and 6cm in diameter. Its round shape makes positioning a bit easier than with stands, especially on varied surfaces like the narrow space on top of a console meter bridge. The multipart isolation construction of the Iso-Puck lets it move to isolate and manage the energy in line with the same isolation concepts employed in other IsoAcoustics products. The Pucks feature a flange suction cup on the top to hold tight the speaker surface, as well as a bottom suction cup flange for the supporting surface. Energy is transferred to the core of the multipart isolator in between which resists lateral movement and offers better isolation.

Notes: The ISO-PUCK mini is the new little brother of the popular ISO-PUCK, offering the same benefits but designed for lighter speakers and monitors. The IsoAcoustics ISO-PUCK mini provide an innovative new approach in isolating studio monitors, speakers and other systems. This unique design provides a high degree of isolation while resisting lateral movement and oscillations, which results in greater sound clarity and focus. This versatile isolation tool is possibly the most cost effective upgrade available for improving the performance and clarity of your speakers or monitors.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-130:

Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

5.1"x6"/13x15cm Short: 2.7"/8cm Tall: 8"/20.3cm 20 lbs/9kg

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-155:

Designed for medium size speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

6.1"x7.5"/15.5x19cm Short: 2.9"/9.5cm Tall: 8.75"/22.5cm 40 lbs/18kg

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 310x310

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated.

Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing. The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 263mm x 380mm

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 190x240

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 330x330

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated.

Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing. The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 250x370

Notes: Two height adjustable monitor stands

A pair of high quality studio monitor stands with unique auto-lock ratchet system and tripod base

High quality studio monitor stands

Adjustable height up to 1.1 metre / 43.3 inches

Auto-lock ratchet system

3 x foot tripod base for easy studio placement

Height: 680mm x 1100mm / 26.7 x 43.3 inches
Maximum load: 40Kg / 88lb
Material: O 35mm / 1.37 inches aluminum pole and steel outer pole
Surface and colour: black powder coated
Weight: 3.2Kg / 7lb
The top plate is 224mm x 232mm

The Novopro SMS80R studio monitor speaker stands have been designed for ease of use as well as safety. The stand has an integral auto-lock ratchet system which allows you to adjust the height and lock in that adjustment without the usual slipping, dropping and inconvenience you get with standard monitor stands.

Kit includes the following:

2 x SMS80R monitor speaker stands
1 x allen (hex) key
2 x cable management clips
1 x instruction manual

Notes: Two steel monitor stands, extendible from 75-130 cm. Max. load each: 30 kg.

- Adjustable monitor stands with cotter lock
- Particularly suited for 5.1 systems or close-range monitors
- Sturdy cast iron foot
- Comes as a pair
- Powder-coated steel version
- Colour: Black

Notes: Adjustable Studio Monitor Floor Stand

The adjustable monitor floor stand by QTX is perfectly designed for studio and home use, providing a sturdy platform for your speakers. Adjust the height of the stand using the hand fastener and safety pin to one of the 5 height positions, up to 540mm high. Foam surface pads are provided to minimize unwanted vibrations and ensure your monitor stays firmly in place. This stand is recommended for use with small and midfield studio monitors. Maximum weight capacity.

Plate dimensions: 240 x 230mm
Base: dimensions: 250 x 225mm
Height: 300mm (minimum)
Height adjustments: 340mm, 390mm, 440mm, 490mm, 540mm
Max. weight load: 15kg
Weight: 2.53kg

In the box

The box for this item contains:
1pcs adjustable studio monitor floor stand

Notes: Elevated Desktop Speaker Stands

These desktop speaker stands from QTX are compactly designed for use in the studio, home and office. These stands provide a platform for your speakers allowing perfect positioning and optimize listening height. Foam surface pads are provided to minimize unwanted vibrations. These stands are designed for use with small nearfield monitor speakers and bookshelf speakers.

Plate dimensions: 160 x 130mm
Base dimensions: 190 x 130mm
Height: 130mm
Max. load: 5" speaker
Dimensions: 190 x 130 x 130mm
Weight: 2.3kg

In the box

The box for this item contains :
Elevated Desktop Speaker Stand Pair

Notes: The TeleLock Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, 100% field serviceable, and easy to set up and take down. However, the TeleLock collar gives the user the ability to safely raise or lower the stand WHILE a speaker is on it thanks to the Auto-lock technology that securely grips the telescoping tube in place as you set its height.

The TS-90 is one of the easiest speaker stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "Raise" or "Lower" setting and the Auto-lock technology provides just the right amount of resistance to allow you to raise or lower the speaker while locking the tube in place as you go. It's like having tour support built into your speaker stand!

The TS-90's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.

The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-90 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-90 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-90, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!

Notes: Get rocking with this Rock-a-Billy NoisyBoys headset.

Equipped with 40mm dynamic diaphragms, the On-Earz Lounge NoisyBoys headset offers excellent sound quality. With a sensitivity of 115 dB, this wired headset is also very trendy, and boast a flashy, hip design. Offering premium comfort thanks to its adjustable headband and softearpads, the Lounge headset is designed for listening to music on the go.

Notes: Introducing the Zumreed color collection, the Sfit headphones are smart and slim and come in ultra stylish colours with mirror finish. They feature simple and convenient white headband with foldable mechanism. You can listen boldly with these style-defining Zumreed headphones.

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Ultimate Support's HyperPad is the industry's first 5 in 1 stand for the iPad (iPad 2, iPad 3rd Generation, and the newest iPad 4th Generation). Whether you're using your iPad at home, at work, while singing at the coffee shop, out gigging, or laying down beats at the club, HyperPad has you and your iPad totally covered.

Fully capable of securely holding your iPad in both landscape and portrait view (and at varying angles), the HyperPad secures your iPad on all four sides. The handy kickback support leg rotates and angles so you're free to adjust it to any arrangement you need.

The HyperPad includes a mic stand pole clamp that securely attaches to poles from 0.8" to 1.25". We've included an adjustable gooseneck attachment for further personalized positioning.

Sometimes, you simply want a secure way to position your iPad on a table. So, whether it's your studio desk, DJ coffin, or the kitchen table, the included desktop clamp and gooseneck arm mounts to any flat surface from 0.5" to 1.6" in thickness providing a flexible, secure mounting option for your iPad.

In addition to clamping the HyperPad to the pole of your mic stand, the HyperPad can be mounted to the top of a microphone stand (5/8" thread) with the included gooseneck arm. So, if you want to make great use of that extra mic stand you have laying around in the garage, or simply prefer vertical access to your iPad, the Ultimate Support HyperPad delivers.

Notes: DMC Vinyl Junkie iPad Cover for iPad Generation 1-3 only.

We think this has to be the coolest, must have iPad cover for any dj, music lover or vinyl junkie anywhere!

Classic soul, breaks, hip hop, disco, funk, jazz & reggae lps are all featured in this stack of vinyl from the greatest, most influential artists, albums & labels of these genres:-

A Tribe Called Quest / Marvin Gaye / Roy Ayers / Donald Byrd / James Brown / De La Soul / Sly & the Family Stone / Isley Brothers / The Pharcyde / Beastie Boys / Public Enemy/ Rob Base & DJ E-Z Rock / Gang Starr / ESG / Rae & Christian / Curtis Mayfield / Herbie Hancock / Chic / Shuggie Otis / Lalo Schifrin / Guru / Bill Withers / Studio one / Greensleeves / Mr Bongo / Rebirth of Cool / DMC / Young Disciples / Super Breaks / Pharoahe Monch / Grover Washington / DJ Spinna & Bobbito / Fred Wesley & The JBs / Willie Hutch / Soul Jazz / Def Jam / Blue Note / Talkin Loud / Atlantic Records / Rae & Christian

Notes: Built with durability and sound quality in mind, the TS12S is Alto's most powerful subwoofer, packing a huge 2500W for professional performance from a manageable 25.9 kg package.

Supplier's Notes:
Rock-Solid Sound from the Bottom, Up

The best performances need the best in sound reinforcement at all ends of the sonic spectrum. For tight, punchy low-end look no further than the Alto Professional TS12S powered subwoofer. When added to your full-range speaker setup, the TS12S subwoofer delivers powerful but controlled low-end presence to your PA configuration for a full and complete listening experience for the modern public music space. With a powered subwoofer, any musical performance will take a giant leap into the realm of tonal balance with the perfect blend of hi, mid, and extended low-end frequencies.

The Most Powerful Subwoofer Yet

Sound reinforcement needs can change from night to night but the best in the business count on reliable power at their disposal whenever it's needed. The TS12S is Alto Professional's most powerful subwoofer yet, packing an incredible 2500 watts of power to make concert halls come alive, night clubs punch and pump, houses of worship lift-up instrumental performances, and more. Thanks to its high-efficiency Class D amplifier, TS12S adds the necessary heft and weight to any public performance for a balanced representation of musical artistry in any environment.

Carefully Built for Quality Performance

A structure is only as good as its foundation and your sound is no different. The TS12S subwoofer is built with reliable durability in mind to be the anchor of your setup and the anchor of your sound. Built with superior materials, the TS12S is engineered with a premium internally braced composite cabinet enclosure for tight, controlled sound. Enjoy all the thump and bump without the unnecessary rumbles and rattles. The key to low-end is clear definition for impactful sonic transmission and a carefully crafted enclosure ensures a truly unbiased sound delivery. With a premium 12-inch driver featuring a 3-inch, voice coil transducer, rest assured, the TS12S subwoofer is built to handle the rigors of live performance whether permanently installed or as part of a traveling setup, night after night.

A Subwoofer for Any Setting

What good is a sub if it doesn't play along nicely with the rest of your speaker setup? The TS12S is designed and engineered to fit into any system thanks to the versatile onboard electronics switches. Quickly bounce through the User-selectable EQ tunings to enable, boost, or bypass low end accentuation appropriately as different shows require. Use the intuitive Phase Alignment function as needed to make sure your tops and subs perform well no matter the setting or setup. With dedicated input and output paths, seamlessly connect your companion Alto Professional full-range loudspeakers or any other standard loudspeaker units.

Technical Specifications

Output Power: 2500W peak @ 4 O
Transducer: Low 12" (305 mm) woofer; 3" (76.2 mm) high-temperature voice coil
Frequency Response: 44 Hz - 140 Hz (- 3 dB)
Frequency Range: 38Hz-152Hz(-10dB)
Maximum SPL: 130dB(@1m)
Connections: (2) XLR+1/4" (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
External Controls: Volume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel

Power

Connection: Standard IEC cable
Input Voltage: 100-120, 50/60 Hz; 220-240 VAC 50/60 Hz
Consumption: 1600W
Fuse: 100-120V, T15AL AC250V; 220-240V, T8AL AC250V
Dimensions (height x width x depth): 17.9" x 18.1" x 19.9" / 454.7 x 459.7 x 505.5 mm
Weight 57.1 lbs. / 25.9 kg

Notes: AT-VM95E VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX

VM95 series Elliptical stereo cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7

ATN-XP5

ATN-XP3

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: AT-VM95E/H VM95 series Elliptical stereo cartridge on AT-HS6 Headshell - AT-VM95E mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Preassembled With AT-HS6BK Headshell
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: P-mount Dual Moving Magnet cartridge with conical bonded stylus

AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever

The AT81CP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.

Designed specifically for the linear format, the AT81CP features Audio-Technica's unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000 Hz
Channel Separation: 18 dB at 1kHz
Vertical Tracking Angle: 20 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000 ohms
Coil Inductance: 400mH (1 kHz)
Output Voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec)
Output Channel Balance: 2.5 dB
Stylus Shape: Conical
Cantilever : Carbon Fibre Reinforced ABS
Mounting: P-mount
Dimensions: H10.0×W15.3×D35.1 mm
Recommended Load Capacitance: 100-200 pF
Replacement Stylus: ATN81CP
Stylus Size: 0.6 mil
Type: Dual Magnet
Weight: 6.0g

Notes: Dual Moving Magnet Mono Cartridge for Shellac or Phonograph records

Model dedicated to 78 RPM records, whose round stylus has a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Mono body

For monaural operation, left and right channels should be connected. A mono body on which left and right terminals are connected internally reduces record noise which is primarily in the vertical direction and obtains a highly focused 'centre' sound image compared with stereo bodies.

600 Series

Specialised 600 series mono body with internal wiring dedicated to monaural sound.

Conical Bonded (3mil) Stylus

A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000Hz
Vertical Tracking Angle: 23 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 1,400O (1kHz)
Output Voltage: 3.0mV (1kHz, 5cm/sec.)
Stylus Shape: Conical Bonded (3mil)
Cantilever: Aluminium Pipe
Static Compliance: 15 x 10-6 cm/dyne
Dynamic Compliance: 2.0 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN70SP
Stylus Size: 3.0 mil
Type: VM Type
Weight: 6.4g

Notes: The Goldring 1012GX record cartridge uses the acclaimed Gyger-2 diamond stylus. This is a fine-line type which gives smooth extended high frequencies, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. The 1012GX represents outstanding value for money and has become one of Goldring's most popular cartridges.

Notes: The 1022GX record cartridge is recommended for the discerning listener. The diamond stylus is a Vital PH type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.

Notes: Top-of-the-range audiophile cartridge from Britain's oldest cartridge company. Beautifully revealing sound with quiet background and replaceable Gyger-S stylus included.

Supplier notes:
The 1042 is a record cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The extended groove contact of its Gyger-S diamond gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.

Notes: The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series is designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of Magnetic Duplex Technology and Goldring Expert Adjustment.

The E3 cartridge, the highest in the range features the same aluminium cantilever as the E2, but benefits from a superior bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it superior high frequency groove detail retrieval ability over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) styli due to its smaller front to back radius. Its main effect is the reduction of sibilance, especially in high level vocal recordings.

Magnetic Duplex Technology:

All cartridges in the range feature Magnetic Duplex Technology - a 'dual magnet' generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.

Expert Adjustment:

The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever:

Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.

The E3 model with its refined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Notes: Representing the pinnacle of E Series engineering and performance, the E4 is the ultimate upgrade for every turntable enthusiast.

World-famous analogue audio specialist Goldring introduces its new flagship E Series moving magnet cartridge: E4. Designed as the ultimate upgrade for any modern budget or midrange turntable, E4 represents the pinnacle of E Series engineering and performance.

E4 is designed to be compatible with all medium-to-high-mass tonearms of the type found on the majority of budget to midrange turntables. And because it's constructed using the same high-quality core as the other E Series cartridges in the range, E4 is ideal both for those who wish to upgrade an obsolete cartridge in its entirety or those who want to boost the performance of their existing E Series cartridge by replacing the stylus.

New super-elliptical nude diamond stylus

The E4 features a 'nude' super-elliptical stylus of just 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond. This makes for a lower effective tip mass of improved rigidity, which in turn means its ability to retrieve high-frequency detail is dramatically improved when compared to the 'bonded' elliptical stylus alternative. It's far less likely to 'mis-track' or overshoot when tracing high-frequency groove modulations, and because of its finely polished 7.6-micron profile it can more effectively fit into closely packed inner grooves. Lower distortion, improved transient response and a flat frequency response all contribute to superior fidelity when compared to any price-comparable alternative.

Hollow aluminium cantilever

To complement its low tip-mass stylus, the E4 features a hollow aluminium cantilever tube. The light weight and superior stiffness of the material allows the stylus to trace medium-to-high frequencies with greater accuracy, while simultaneously reducing distortion and mis-tracking.

Magnetic Duplex Technology

Stereo information is contained in a single 'V'-shaped groove that has perpendicular sidewalls angled at 45 degrees. Conventional cartridges, which use a single large magnet interacting with two vertically mounted coils (one for left-channel information, one for right) to extract a stereo signal from the groove, can permit high levels of crosstalk - and consequently only a modest amount of left- and right-channel separation. E4 uses Goldring's Magnetic Duplex Technology that positions two low-mass magnets at the same angles as the coils - so each magnet interacts only with its partnering coil. This allows the E4 to transcribe the information in the groove more accurately, and results in greater stereo separation and a more accurate soundstage.

Expert adjustment facility

'Azimuth' describes the angle that the vertical centre line of the stylus makes with the record's surface - it must be exactly perpendicular to the groove. Owners of budget and midrange turntables usually have no facility to adjust the azimuth, so it's vital the cartridge has been precisely adjusted before it's fitted to the turntable's tonearm - badly adjusted azimuth can cause increased crosstalk and uneven channel balance. E4 is designed to allow micro-adjustments to be made during the production process, ensuring each cartridge leaves the Goldring factory needing no further azimuth adjustment.

Technical Specifications

Frequency Range: 20 Hz - 20 kHz
Channel Balance: < 1.5 dB @ 1 kHz
Channel Separation: > 20 dB @ 1 kHz
Sensitivity: 3.5 mV (1 kHz @ 5 cm/s)
Static Compliance: 20 mm/N
Vertical Tracking Angle: 20-
Stylus Radius: 7.6 micron (0.3 x 0.7 mil)
Stylus Type Nude: elliptical
Load Resistance: 47 kO
Load Capacitance: 100- 200 pF
Internal Inductance: 400 mH
Internal Resistance: 410 O
Cartridge Mass: 6.9 g
Fixing Centre: 12.7 mm (0.5 in)
Playing Weight: 1.5 - 2.5 g (1.75 g recommended)

Notes: The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.

Frequency Response: 10-55,000 Hz
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 2.5
Stylus Type: C
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
Weight: 5.5

Notes: The Black3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black2 and Green2?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Black3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Black3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Black2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black3 and Green3?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Green2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: There are many analogue lovers with record collections that include mono albums. Grado strive to have products that will fit all the needs of the analogue enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ and the ME+ are mounted with an elliciptical diamond. The ME+ uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings.

Frequency Response: 10-55,000 Hz
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 1.5
Stylus Type: E
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
Weight: 5.5

Notes: Excellent value upgrade to standard hi-fi turntable styluses. Designed for smooth sound with a balanced tonal presentation. Hand built in Brooklyn by experienced audiophile specialists.

Supplier notes:
The Silver3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency.

What's the difference between Gold3 and Silver3?
Approximately 5% of the Silver2 production runs meet higher test specifications. The cartridges that exhibit these specs are hand-selected to become a Gold2.
Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.

This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Silver3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring some new techniques to the Silver3.

This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Silver2 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Silver2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

Notes: Great value subwoofer designed to suit the bass requirements of modern music. Updated for 2022, the SUB8's bass response extends down to 35 Hz. Presented here in sleek matte black finish (also available in white).

Supplier's Notes:
Updated in 2022, this Sub8 gives you the speed and accuracy that only a sealed subwoofer can deliver. An 8" woofer driven by a 300W amp responds quickly to transients and keeps distortion to a minimum. Its compact size provides full-range sound without sacrificing floor space and a crossover filter and phase control allow for easy integration into any audio system. Sub8 provides worry-free longevity with its rigid MDF construction, solid rubber feet, metal grill, and durable vinyl finish. With matching aesthetics, sub8 is the perfect companion to any Kanto speaker or wherever else tight bass in a tight space is needed.

Experience the full impact of every song and soundtrack.

Sealed enclosure

Sealed subwoofers react to changes in audio more quickly than vented designs. Every bass note is reproduced accurately with little distortion allowing you to hear pure audio and not the subwoofers' influence on the sound.

Compact Design

At roughly 11" in each direction, sub8 fits under desks or in the smallest of apartments where traditional home theater subwoofers may dominate the space.

Drivers

8" Paper Cone Woofer

Audio

Class D Amplifier
300W Peak Power (150 Watts Total RMS)
Frequency Response: 35 Hz - 175 Hz

Inputs

RCA L/R Line Level

What's in the box

Power Cord
RCA Cable
Manual

Weights & measurements

Dimensions:
11" x 11" x 11.9" (28 x 28 x 30.3 cm)
Net Weight: 18.3 lb (8.3 kg)

Notes: Everyone loves bass, so Minirig decided to take the Subwoofer to the next step - rather than the old 30 watts of power, it now has 40 watts of power! This ultimately gives you a cleaner low that matches the new Minirig 3.

Don't just hear the bass - feel the bass:

The Subwoofer works in harmony with your Minirig or Minirig Mini to enhance the low end.

Optimised Airflow Technology:

With Minirig's custom folded horn design you get bone shaking bass, in a small package.

Take the party on the road:

Chuck this little bass bin in your rucksack and complete your Minirig soundsystem set-up.

Notes: Everyone loves bass, so Minirig decided to take the Subwoofer to the next step - rather than the old 30 watts of power, it now has 40 watts of power! This ultimately gives you a cleaner low that matches the new Minirig 3.

Don't just hear the bass - feel the bass:

The Subwoofer works in harmony with your Minirig or Minirig Mini to enhance the low end.

Optimised Airflow Technology:

With Minirig's custom folded horn design you get bone shaking bass, in a small package.

Take the party on the road:

Chuck this little bass bin in your rucksack and complete your Minirig soundsystem set-up.

Notes: Plug-in type cartridge

Output voltage: 3mV (5cm/SEC)

Frequency response: 20Hz to 20KHz

Channel separation: 20 dB (1KHz)

Channel balance: 2dB or less

Load resistance: 47KO

Load capacity: 100pF

Cantilever: Aluminum alloy

Needle tip: 0.6mil cone, joining diamond

Notes: Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detailed refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.

Features:
-Superfine polished eliptical diamond bonded stylus
-Powerfull samarium cobalt magnet
-Lightweight aluminum alloy cantilever for high fidelity
-Carbon fibre reinforced plastic shoe
-Anti ferro magnetic permalloy shield casing

Stylus replacement: Nagaoka JN-P110

The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.

Notes: The MP 200 is a unique cartridge. It manages to provide an amazingly rich and warm mid range for jazz and vocals while still providing the detail and dynamics across the spectrum. It's not just another "warm sounding" cartridge.

Specifications

Type: Moving magnet (Permalloy)
Cantilever: High-strength Boron
Stylus type: Superfine elliptical diamond
Weight: 6.5 g
Output voltage @ 1kHz,5cm/sec: 4mV
Frequency response: 20Hz-23kHz
Channel balance @ 1kHz: > 1.5dB
Channel separation @ 1kHz: > 25dB
Recommended loading: 47k ohms
Dynamic compliance: 7.2 x 10-6 cm/dyne
Static compliance: 20 x 10-6 cm/dyne
Tracking force range: 1.5 - 2.0 g
Break-in period: 30 hours
Stylus replacement: Nagaoka JN-P200

Notes: The Sumiko Pearl is a truly unique and precious find within the sea of entry-level phono cartridges. With decades of accolades to its name, the Pearl's smooth, natural sound reproduction breathes life into any recording with poise and transparency. Its diminutive price also belies its colossal ability to pull a complete sonic picture from each record it touches.

Rounding off the budget series with style and aplomb, the Pearl is an affordable audiophile marvel that's sure to delight.

Frequency Response:: 12Hz - 30kHz
Output Voltage: 4.0mV
Load Impedance: 47kO
Channel Seperation: 3dB @ 1kHz
Channel Balance: <0.5dB@ 1kHz
Stylus Type: Elliptical
Compliance: 12x10-6 cm/dyn
Tracking Force Range: 1.5 - 2.0g
Recommended Force: 2.0g
Cartridge Weight: 6.0g

Notes: The Oyster Series' premium Moving Magnet cartridge range features four models with a matching aesthetic, all named after a different type of Oyster.

The Rainier is a venerable cartridge which expands on the company's legacy for smooth, natural sound reproduction in its affordable cartridge models. After years of development, the Rainier features an integrated body and generator system that significantly reduces internal resonances. Finished with an expertly shaped elliptical stylus, the Rainier is capable of extracting even the more nuanced musical details.

The Rainier utilises the same cartridge body as the Olympia and Moonstone, allowing for easy stylus upgrades as your listening system progresses.

Frequency Response:: 15Hz - 25kHz
Output Voltage:: 5.0mV
Internal Impedance: 1.130O
Load Impedance: 47kO
Channel Seperation: 25dB @ 1kHz
Channel Balance: 1.5dB@ 1kHz
Stylus Type: Elliptical
Compliance: 10x10-6 cm/dyn
Tracking Force Range: 1.8g - 2.2g
Recommended Force: 2.0g
Cartridge Weight: 6.5g

Notes: Ever since the 1970's the iconic white woofer and signature sound of Yamaha's nearfield reference monitors have become a genuine industry standard for a reason - their accuracy. Unlike studio monitors with added bass or treble frequencies which may sound more flattering at first, HS Series speakers were designed to give you the most honest, precise reference possible, providing an ideal sonic platform to build on throughout the mixing process.

By combining acquired knowledge and expertise with state-of-the-art sound technologies, Yamaha's speaker engineering team have examined, then optimized, every aspect that has contributed to making these monitors the most trusted in the business. The second generation HS Series also adds a new 6.5" model to the lineup, bringing its exceptional accuracy to an even greater variety of recording environments.

8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz
22Hz - 150Hz frequency response
High-power 150W amplifier exclusively designed for low frequencies
LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
XLR and TRS phone for inputs and XLR for outputs

Notes: A pair of high quality, 10cm dual cone mini speakers. Ideal for use in the ceiling. These 80W speakers boast a robust ABS construction and have quick-connect terminals. Sold in pairs.

Notes: Stylish, good-quality powered speakers suitable for home listening or DJ practice. Built-in Bluetooth for streaming, auto standby and remote control for convenience.

Supplier's Notes:
Keep things simple without forfeiting performance. Housed within YU's compact MDF cabinets is everything you need to get the most out of your favorite tunes. Bluetooth 4.2 with aptX provides high-quality streaming, a single RCA input covers all your analog needs, and a SUB OUT port gives you the option to really crank up the bass. Equipped with 4-inch Kevlarr drivers and 1-inch silk dome tweeters, this high-performance powered speaker system delivers smooth, natural sound while ensuring you experience the full impact of lower frequencies. For laid-back listening, use the provided remote to make quick volume, tone and balance adjustments, as well as control playback while streaming via Bluetooth.

High-performance materials. Exceptional sound.

Silk Dome Tweeters
YU's 1-inch tweeters are made from silk to deliver a high-frequency range that is bright and refined. Their dome shape improves sound dispersion to ensure your ears capture every sound, regardless of where you are in the room.

Never miss a beat.

Signal Detection
Automatic standby and power-up mode conserves power when you're away and continues playback when your music starts playing.

Streaming
Play tunes from the palm of your hand.
Featuring integrated Bluetooth 4.2 with Qualcommr aptX technology, YU lets you stream high-quality audio directly from any Bluetooth-enabled device. Sit back and enjoy your carefully curated playlist from anywhere in the room.

Nearfield
Upgrade your desktop setup.
Take your desktop setup to the next level by connecting YU to your computer via its RCA input.

To reduce vibration and improve soundstaging, use YU with SP9 desktop speaker stands.

Take control of your sound.

Packed with functionality, the YU series remote makes listening to audio more convenient. Quickly switch between sources, tune your sound to fit your space, and control playback while streaming via Bluetooth.

Notes: Stylish and compact speakers with powerful 200-watt amplifier built in. Impressive 50 Hz - 20 kHz frequency response courtesy of 5.25-inch kevlar woofer and 1-inch silk dome tweeter.

Supplier's Notes:
Satisfy your craving for powerful, full-impact sound with YU6. Armed with a formidable Class D amplifier pumping out 200-Watt peak power, YU6 will have you questioning what it really means to be loud. Its 5.25-inch Kevlarr drivers and 1-inch silk dome tweeters inject detailed sound into every square inch of living space, evoking emotions that can only be expressed with an ear-to-ear grin.

High-performance materials. Exceptional sound.
YU6's 1-inch tweeters are made from silk to deliver a high-frequency range that is bright and refined. Their dome shape improves sound dispersion to ensure your ears capture every sound, regardless of where you are in the room.

Unmatched connectivity.
Inspired by an equal appreciation for digital and analog, YU6 gives you the freedom to enjoy all your devices. Connect a turntable via a built-in phono preamp, transmit high fidelity audio from your computer or TV with Optical TOSLINK, or sit back and enjoy your newly curated playlist with Bluetooth 4.0. With five inputs and a subwoofer output, YU6 brings all your sound to life.

Throw on your favorite record.
YU6 comes equipped with a built-in phono preamp, allowing you to easily connect any vintage or modern-day turntable. Toggle between line-level and phono with a simple flip of a switch, and reduce noise using the provided ground terminal.

Play tunes from the palm of your hand.
Featuring integrated Bluetooth 4.0 with Qualcommr aptX technology, YU6 lets you stream high-quality audio directly from any Bluetooth-enabled device. Sit back and enjoy your carefully curated playlist from anywhere in the room.

Upgrade your desktop setup.
Take your desktop setup to the next level by connecting YU6 to your computer via the RCA, AUX or Optical TOSLINK inputs.

To reduce vibration and improve soundstaging, use YU6 with SP6HD desktop speaker stands.

Bring your movies to life.
Enhance any cinematic experience with high-fidelity sound by connecting YU6 to your TV via one of two optical TOSLINK inputs.

To ensure your speakers remain stable and properly positioned, place them on SP floor stands.

Take control of your sound.
Packed with functionality, the YU series remote makes listening to audio more convenient. Quickly switch between sources, tune your sound to fit your space, and control playback while streaming via Bluetooth.

Never miss a beat.
Automatic standby and power-up mode conserves power when you're away and continues playback when your music starts playing.

Use the provided USB charging port to conveniently power your phone, smart home or casting device directly through your speakers.

DRIVERS
1" Silk Dome Tweeters
5.25" Kevlarr Drivers

AUDIO
Class D Amplifier
200W Peak Power (100 Watts Total RMS)
Frequency Response: 50 Hz - 20 kHz

INPUTS
3.5mm mini-jack AUX
RCA with Phono Switch
2 x Optical (TOSLINK)
Bluetooth 4.0 with Qualcommr aptX

OUTPUTS
Subwoofer
USB Charge 5V 1A

WHAT'S IN THE BOX
Remote with Batteries
Power Cord
Speaker Wire (16")
3.5mm Auxiliary Cable (6.5")
8 x Rubber Feet
Manual

WEIGHTS & MEASUREMENTS
Dimensions (each speaker):
6.9" W x 8.1" D x 10.7" H (17.5 x 20.5 x 27.2 cm)
Net Weight (active): 11.4 lb (5.2 kg)
Net Weight (passive): 8.7 lb (4.0 kg)
1/4"-20 Threaded Mounting Hole

Notes: AM's carbon fibre brush removes static charges from the stylus. For cleaning the pick-up, run the brush along the cantilever in the direction of the stylus. Unlike other pick-up brushes on the market that claim to be made with carbon fibre, this one actually is.

Eliminate dust, dirt and static build-up from your record player's stylus with the Pickup brush.

The conductivity of the brush's carbon fibre bristles helps to drain static charge from the stylus and lift any residual dust and grime.

Maintain your stylus, improve audio fidelity and lengthen the life of your records.

Notes: The Audio Anatomy Vinyl-Slipmat consists of a 1,5 mm thick cork and nitrile rubber mix. With a diameter of 295 mm the slipmat fits all turntables. The insulating properties of the cork and nitrile rubber mix prevent harmful resonances. In contrast to felt mats, cork additionally avoids electrostatic charging and thus prevents cracking when playing the record.

Notes: Universal size suitable for all turntables (295 mm diameter) // Prevents electrostatic charging // Resonance insulation // Premium leather // Produced in the EU

DESCRIPTION
The Audio Anatomy Vinyl-Slipmat Leather consists of 1.5 mm thick premium cow leather. With a diameter of 295mm, the slipmat fits all turntables. The leather's insulating properties prevent harmful resonances. In contrast to felt mats, leather additionally avoids electrostatic charging and thus prevents cracking when playing the record.

DETAILS
THICKNESS 1.5 mm
DIAMETER 295 mm
WEIGHT 150 grams
BARCODE 9003829971484
CAT NUMBER AC047 AA

Notes: Replacement stylus for Audio-Technica’s AT91R cartridge. Incorporates a bonded conical stylus tip and an aluminium alloy tube cantilever for the pick-up of subtle details.

0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL