Secure shopping Secure shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

Secure shopping Secure shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Artikel 1 bis 50 von 412 auf Seite 1 von 9 anzeigen
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | »
1010 Music Bitbox Sampler & Looper Module
 In den Warenkorb
 5 in stock $621.12
Cat: 631136 Rel: 14 Nov 16
 
Sampler & looper module with 24-bit audio path & clock/MIDI inputs
Notes: Bitbox delivers recording, clip launching, and looping in a musically intelligent way. With a 24-bit audio path, you can capture and play samples with impeccable audio quality. With clock and MIDI inputs, you can create loops pre-cut to bars or beats and launch clips with similar synchronization. Bitbox has a capacitive touch screen that makes easy work of tweaking, browsing, and loading sounds from microSD card.
Read more
1010 Music Fxbox Performance Effects Module
 In den Warenkorb
 3 in stock $588.93
Cat: 653403 Rel: 26 Jun 17
 
Multi-effects processor module - 26HP
Notes: Fxbox is a 26HP performance effects module for Eurorack. Fxbox combines 16 realtime effects with a number of controls from the touch screen to continuous knobs and external modulators. Use the XY pad to control three different aspects of the sound at once. Use the internal step sequencer to create tricked out, remix style effects. Create complex layers and builds using the touch screen to isolate the individual effects.

Fxbox is great for breathing life into pads and tones as well as introducing alternate timing and variety to rhythmic parts. It relies on an external clock signal or MIDI to perform in time with your music. Fxbox comes with 50 factory presets and an unlimited number of user presets.
Read more
FORTHCOMING
1010 Music MX4 Buffered MIDI Multiple Module
e-mail me when released
coming soon $TBA
Cat: 660087 Rel: 01 Sep 17
 
3HP buffered MIDI multiple module for Eurorack - copies one MIDI signal to four outputs
Notes: The MX4 Buffered MIDI Multiple by 1010music serves a very simple but useful purpose: it takes in a single MIDI input and repeats it in real time to four MIDI outputs. The end result is you can now control four times as many devices from a single MIDI source.

The MX4 uses TRS minijacks for handy connection directly between the following devices:

- All 1010music modules, including MX4, bitbox, and fxbox
- The Arturia BeatStep Pro
- Novation products, including the Launch Pad Pro

The MX4 includes two MIDI adapters to connect with any equipment using the MIDI standard, 5-pin DIN connector, two TRS cables for MIDI patching and a standard power ribbon cable for connecting to your Eurorack.
Read more
2hp ADSR Module
 In den Warenkorb
 3 in stock $94.39
2hp ADSR Module (synth module)
2hp
Cat: 638779 Rel: 27 Feb 17
 
Four stage linear envelope module with two expressive ranges
Notes: ADSR is a four stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.
Read more
2hp Brst Burst Generator Module
 In den Warenkorb
 2 in stock $81.52
2hp
Cat: 638777 Rel: 27 Feb 17
 
Voltage controlled burst generator & trigger delay module
Notes: Brst is a voltage controlled burst generator and trigger delay. Upon receipt of a gate signal, Brst will output a stream of triggers. Knobs and CV inputs give the user control over speed and the number of repetitions. Whether you're generating bouncing balls, crafting IDM drum beats, or humanizing a clock signal, Brst will prove an indispensable addition to your rack.
Read more
2hp Clk Wide Range Voltage Controlled Clock Generator Module
 In den Warenkorb
 2 in stock $83.66
2hp
Cat: 638780 Rel: 27 Feb 17
 
Voltage controlled clock generator
Notes: Clk is a voltage controlled clock generator with all the features a master clock needs. It has an extremely wide range from ten seconds between pulses well into audio rate. In addition, the pause button and CV input provide an expressive feature that is all too often missing in a modular setup. Stop using LFOs or other modulation sources for your master clock, and let Clk do what it's best at.
Read more
2hp Comb Filter Module
 In den Warenkorb
 2 in stock $107.26
2hp Comb Filter Module (synth module)
2hp
Cat: 658149 Rel: 07 Aug 17
 
Comb filter with self oscillation capability
Notes: Comb is an IIR peaking comb filter with control over cutoff frequency, resonance that can be driven into self oscillation, and a dampening filter in the feedback path. An incredibly short, tuned delay line will alter the character of your input by imposing harmonic peaks on the source. Subtle settings can result in thickening timbres, reminiscent of phaser-like effects, while more extreme settings can create lustrous string sounds from white noise, or tear your waveform to shreds. Explore new sonic territory with Comb.
Read more
2hp Delay Module
 In den Warenkorb
 2 in stock $114.77
2hp Delay Module (synth module)
2hp
Cat: 649105 Rel: 15 May 17
 
Full featured delay audio processor
Notes: Delay is a flexible, full-featured delay audio processor. CV over all parameters provides dynamic access to its nuanced controls. The feedback path ranges from slapback to infinity, allowing for wild permutations of the original signal.

With delay times from milliseconds to nearly two seconds, Delay is sure to find a use in every patching situation. Add subtle echo to a melodic line, or crank up the feedback and hear a bed of layered sounds to bury your listeners in.
Read more
2hp Div 2 Channel Voltage Controlled Clock Divider & Multiplier Module
 In den Warenkorb
 1 in stock $101.90
2hp
Cat: 635858 Rel: 02 Jan 17
 
Clock divider/multiplier module
Notes: Div is a 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between.

CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.
Read more
2hp EG Envelope Generator Module
 In den Warenkorb
 1 in stock $93.32
2hp
Cat: 638778 Rel: 27 Feb 17
 
Full featured two stage envelope generator module
Notes: EG is a full featured two-stage envelope generator. In addition to a colossal range from 3ms to 11 minutes per stage, EG features the ability to switch between linear and exponential curves on the fly, a built-in attenuator, and CV over attack and decay. Boasting more features than modules five times its size, EG can fill any envelope-sized gap in your system.
Read more
2hp Env Envelope Generator Module (B-STOCK)
 In den Warenkorb
 1 in stock $120.68
2hp
Cat: 638558 Rel: 15 Aug 16
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Envelope generator with linear and exponential shapes. CV over decay time and end of attack gate output.

Specifications

Max Power Consumption: 43 mA +12V, 16 mA -12V

Depth: 34 mm (skiff friendly)

Width: 2hp
Read more
2hp Filt Multimode Analog Filter Module
 In den Warenkorb
 1 in stock $146.70
2hp
Cat: 620660 Rel: 15 Aug 16
 
Multimode analog filter synth module in Eurorack format - 2HP wide
Notes: Multimode analog filter with simultaneous outputs for low pass, high pass, band pass and notch filter types. Classic 24 dB/octave topology.

Specifications

Max Power Consumption: 40mA + 12V, 39mA - 12V

Depth: 50 mm (skiff friendly)

Width: 2hp
Read more
2hp Freez Voltage Controlled Locked Looper Module
 In den Warenkorb
 3 in stock $135.16
2hp
Cat: 652192 Rel: 12 Jun 17
 
Looper module for Eurorack synthesizers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio. Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
2hp LFO Low Frequency Oscillator Module
 In den Warenkorb
 1 in stock $137.31
2hp
Cat: 620661 Rel: 15 Aug 16
 
Low Frequency Oscillator (LFO) synth module in Eurorack format - 2HP wide
Notes: Low frequency oscillator with smooth morphing between sine, triangle, sawtooth, and square waveforms. Four alternative waveforms accessible including stepped triangle, FM sine, ramp, and the mustache wave.

Specifications

Max Power Consumption: 43 mA +12V, 16 mA -12V

Depth: 34 mm (skiff friendly)

Width: 2hp
Read more
2hp Logic 2 Channel Boolean Gate Operator Module
 In den Warenkorb
 1 in stock $79.37
2hp
Cat: 635859 Rel: 02 Jan 17
 
Boolean gate operator module
Notes: Logic is a 2 channel, boolean gate operator. It provides two unique logic operations: AND and OR. The AND Channel is useful for gating existing rhythmic events within a patch.

Conversely, The OR channel is well suited for mixing two timing events down to a single output, creating interesting polyrhythms and syncopations from existing gate signals.
Read more
2hp LPF Four Pole Voltage Controlled Low Pass Filter Module
 In den Warenkorb
 2 in stock $105.12
2hp
Cat: 649107 Rel: 15 May 17
 
Analog, voltage controlled low pass filter
Notes: LPF is a four-pole, voltage controlled low-pass filter. Its 24 dB per octave slope and OTA topology provide a smooth, buttery character. Resonance can be pushed to self oscillation, turning it into a sine wave VCO with accurate 1V/oct tracking across four octaves.

In addition, CV over resonance gives dynamic sound shaping possibilities under voltage control. Hit the slope with LPF.
Read more
2hp MIDI Interface Module
 In den Warenkorb
 2 in stock $104.05
2hp
Cat: 649106 Rel: 15 May 17
 
MIDI Eurorack module
Notes: MIDI is a plug and play solution for interfacing with your computer or MIDI hardware. Four modes provide monophonic, duophonic, dual mono, and quad trigger operation.

MIDI clock, CC messages, and note on messages are all easily accessible between the four modes. The status LED provides clear indication of MIDI data being received by the module. Class compliant MIDI device on Mac/PC/Linux. Get connected with MIDI.
Read more
2hp Mix 4 Channel Mixer Module
 In den Warenkorb
 3 in stock $105.12
2hp
Cat: 635860 Rel: 02 Jan 17
 
4 channel mixer module
Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.
Read more
2hp Osc Analog Oscillator Module
 In den Warenkorb
 2 in stock $146.70
2hp
Cat: 620663 Rel: 15 Aug 16
 
Analog oscillator synth module in Eurorack format - 2HP wide
Notes: Analog oscillator with FM, Sync, and V/Oct inputs. Simultaneous output of sine, triangle, sawtooth, and square waveforms.

Specifications

Max Power Consumption: 34 mA +12V, 35 mA -12V

Depth: 40 mm (skiff friendly)

Width: 2hp
Read more
2hp Rnd Random Voltage Generator Module
 In den Warenkorb
 1 in stock $157.68
2hp
Cat: 620664 Rel: 15 Aug 16
 
Random voltage generator synth module in Eurorack format - 2HP wide
Notes: Rnd is a random voltage generator and random gate source with an internal clock. The output is a quantized random voltage between 0V and 10V. The attenuator control provides fine-tuning of the random voltage.

This allows for a musically useful range to be defined. In addition, random gates are emitted from the gate output with an associated probability control while externally clocked.

Great for modulation and chaotic rhythmic events, Rnd is a universal solution for adding unpredictability to your system.

Specifications:

Max Power Consumption: 40 mA +12V, 16 mA -12V

Depth: 34 mm (skiff friendly)

Width: 2hp
Read more
2hp Rout 4 Channel Gate Switch Module
 In den Warenkorb
 1 in stock $72.94
2hp
Cat: 638782 Rel: 27 Feb 17
 
Voltage controlled gate switch module
Notes: Rout is a voltage controlled gate switch. The signal present at the input can be sent to one of four outputs. Great for splitting a pattern across multiple voices or creating variations in a patch with a single gate source, Rout is a powerful addition to any rack's rhythm section.
Read more
2hp S+H Dual Sample & Hold Module
 In den Warenkorb
 1 in stock $72.95
2hp
Cat: 638775 Rel: 27 Feb 17
 
Analog sample & hold module with two independent channels
Notes: Great for generating random voltages from white noise, arpeggios from sawtooth waves, and downsampling audio signals.
Read more
2hp Seq 16 Step Sequencer Module
 In den Warenkorb
 2 in stock $107.26
2hp
Cat: 635862 Rel: 02 Jan 17
 
16 step sequencer module
Notes: Seq is a 16 step sequencer that is great for controlling oscillators, filters, and anything with a CV input. Portamento, length and playback mode can be adjusted, allowing for versatile, and performable sequences.

An eight LED display provides clear feedback for each parameter, keeping the interface as simple as possible while boasting a full feature set.
Read more
2hp TM Turing Machine Module
 In den Warenkorb
 2 in stock $105.12
2hp
Cat: 638776 Rel: 27 Feb 17
 
Random sequence generator module
Notes: TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user's probability settings. By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you're looking for a controlled random source, or an evolving melody generator, TM has you covered.
Read more
2hp Tune Multi Scale Pitch Quantizer Module
 In den Warenkorb
 2 in stock $90.11
2hp
Cat: 635864 Rel: 02 Jan 17
 
Multi-scale pitch quantizer
Notes: Tune is a multi-scale pitch quantizer. It features 11 scales ranging from chromatic to octatonic with everything in between. In addition, the bias control allows the user to transpose the melody to a different octave or starting note.

This functionality opens up every musical mode for each of its 11 scales and provides a performable control for transforming melodies on the fly.
Read more
2hp VCA Dual Voltage Controlled Amplifier Module
 In den Warenkorb
 6 in stock $85.82
2hp
Cat: 638773 Rel: 27 Feb 17
 
Dual linear VCA module with CV input attenuator & DC-coupled inputs
Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.
Read more
2hp Verb Stereo Reverb Module
 In den Warenkorb
 7 in stock $109.41
2hp
Cat: 649102 Rel: 15 May 17
 
Stereo reverb Eurorack module
Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.
Read more
4ms Buff Mult Buffered Multiple Module
 In den Warenkorb
 1 in stock $71.34
Cat: 589492 Rel: 14 Dec 15
 
Buffered multiple synthesizer module with LED indicators - 3HP wide
Notes: The Buff Mult is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.
Read more
4ms Pingable Envelope Generator Module
 In den Warenkorb
 2 in stock $308.94
Cat: 589495 Rel: 14 Dec 15
 
Dual envelope generator synthesizer module - 20HP wide
Notes: The Pingable Envelope Generator (PEG) from 4ms is a dual envelope generator whose envelope lengths are set by incoming clocks or "pings".

The PEG has full CV control of envelope shape, skew, and ping (clock) division/multiplication, as well as a plethora of triggering and cycling options (AD, AR, quantization, cycle), and a tap tempo button for each channel.

Scaling/shifting:
- Scale knob is an attenuating inverter for main envelope output (Maximum 0V to +10V non-inverted, and Minimum -10V to 0V inverted).
- Bi-polar button centers main envelope output around 0V (-5V to +5V output)
- "+5V ENV" jack is a non-scaling output that always produces a 0V to +5V envelope, regardless of Scale and Bi-polar settings
- "OR" jack outputs an analog OR of the two scaled envelope curves. This outputs the highest value from either envelope at any given moment, taking into account the Scale and Bi-polar controls.

Gate outputs:
- End-of-Rise (EOR) gate output goes high when envelope finishes a rise portion, and goes low when envelope begins a rise portion
- End-of-Fall (EOF) gate output goes high when envelope finishes a fall portion, and goes low when envelope begins a fall portion
- Jumper for each channel changes EOR output to a Half-Rise gate output. The Half-Rise jack goes high when 50% of the time of the rise portion has elapsed, and goes low after 50% of the time of the fall portion. Using the Skew parameter, this jack provides a variable phase gate output useful for quadrature effects and clock phase shifting and trigger delay effects. Factory setting is EOR for red channel, Half-Rise for blue channel.

Triggering/cycling:
- Cycle button for each channel forces envelope to self-cycle in sync with the ping clock (LFO mode). Button lights up when in cycle mode.
- "T" jack toggles the state of both channels' Cycle button when a gate is applied
- "QNT" jack for each channel triggers an envelope to start at the next quantized beat, with respect to the divided/multiplied ping clock. Holding a gate high on this jack causes the envelope to repeat.
- "Async" jack for each channel causes an envelope to output immediately (asynchronously). Holding a gate high results in an AR envelope (rise-sustain-fall). If cycle mode is enabled, the envelope will continue to cycle at this new phase with respect to the ping clock. Phase can be reset to being in sync with the ping clock by pressing the cycle button or applying a pulse to the QNT jack.

CV input jacks:
- CV control of Ping Div/Mult, Skew, and Curve using the CV jacks. Respective knobs set the center offset for the applied CV
- CV of 0-10V will modulate the parameter's full range However, a 0-5V CV will modulate the parameter within a very useful range.
Read more
4ms Quad Clock Distributor Module (Rev 2)
 In den Warenkorb
 2 in stock $231.70
Cat: 589490 Rel: 14 Dec 15
 
4 channel voltage controlled clock divider/multiplier synthesizer module with master tap tempo - 10HP wide
Notes: Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.

With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain "Master" clock module, and/or a complex rhythmic pattern generator.
Read more
4ms Quad Pingable LFO Module
 In den Warenkorb
 1 in stock $287.49
Cat: 589494 Rel: 14 Dec 15
 
Compact, playable four-channel tap-tempo, clock-syncable LFO synthesizer module with variable skew and reset - 12HP wide
Notes: The Quad Pingable LFO is a compact, playable four-channel tap-tempo, clock-syncable LFO with variable skew and reset.

The QPLFO is designed to be useful in small portable systems that require maximum functionality in minimal space, as well as large systems that need maximum modulation sources.

Controls and jacks:
- Tap tempo button ("Ping") for manually setting the tempo
- Ping jack sets tempo with an external clock (any complex signal can be used as a clock)
- On/mute button enables or mutes the output (latching button)
- Skew knob and CV jack control the waveshape by altering the ratio between rise and fall times
- At 0% Skew (0V of CV), the shape is a "plucky" near-expo curve
- At 1% Skew (just over 0V of CV), the shape is ramp-down
- At 50% Skew (about 5V of CV), the shape is a triangle
- At 100% Skew (about 10V of CV), the shape is ramp-up
- Skew knob provides offset to the incoming CV signal, so any range of CV is acceptable
- Reset jack restarts the LFO without changing the tempo (rising edge triggered)
- OUT jack outputs either a 0 to 10V waveshape, or a -5V to +5V waveshape (jumper selectable)
- LED flashes and dims to the signal on the OUT jack
- Tap tempo button flashes to the internal tap-tempo clock or to incoming pulses on the Ping jack
- On/Mute button lights up when channel is On

Advanced:
- Ping and Reset inputs use comparators, so any waveshape can be used for triggering (audio waves, complex LFOs, even the QPLFO itself!)
- Trim-pot on PCB allows for adjustment of comparator threshold value

- "Fire-on-unmute" jumper per channel:
- When this optional jumper is installed, pressing the On button to turn the channel on will reset the LFO.
- If the jumper is not installed (factory default), pressing On will unmute the LFO without resetting (LFO runs in the background when muted)

- Bipolar/Unipolar jumper:
- Setting jumper to Bipolar makes the outputs -5V to +5V
- Setting jumper to Unipolar makes the outputs 0V to +10V
- One jumper controls all four channels

- One-shot mode: Reset jack can be used to trigger a one-shot envelope if the external ping clock is stopped. See manual for detailed discussion

- Floating Reset mode: Holding a high gate on Reset jack allows the waveshape to run freely without automatically re-syncing to the ping clock. A bare cable plugged into the jack causes a high gate

- Connects to other modules using ribbon cables:
- Outputs can connect to the 4ms VCA Matrix, or the 4ms SISM, the Circuit Abbey Intermix or the Toppobrillo Mixiplexer
- Normalization of ping jacks can connect to the 4ms Quad Clock Distributor
Read more
4ms Rotating Clock Divider Module (Rev 2)
 In den Warenkorb
 3 in stock $175.93
Cat: 589497 Rel: 14 Dec 15
 
Rotating Clock Divider (RCD) synthesizer module - 4HP wide
Notes: The Rotating Clock Divider (RCD) produces eight divided clock tempos from a single input clock. The divisions range from /1 to /64, including all odd and non-standard divisions such as /3 and /17 and /62. A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync/start with an external clock.

Jacks:
- Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
- CV Rotate (0V to +5V input)
- CV Reset (5V to 15V trigger)
- Divided Clock Outputs (8 jacks):
Divide-by-(1+R)
Divide-by-(2+R)
Divide-by-(3+R)
Divide-by-(4+R)
Divide-by-(5+R)
Divide-by-(6+R)
Divide-by-(7+R)
Divide-by-(8+R)
...where R is the CV Rotation.
- Selectable Gate/Trigger mode:
- Selectable Divide range up to Divide-by-64:
Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
- Selectable Auto-reset:
Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more "dance-able" even when using the "weird" clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
Read more
4ms Row Power 30 Power Solution For Eurorack Systems (white)
 In den Warenkorb
 1 in stock $106.74
Cat: 589508 Rel: 14 Dec 15
 
Power solution for eurorack systems - 30W
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 30 provides 30W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.5A
-12V @ 750mA
+5V @ 500mA
Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
4ms Row Power 40 Power Solution For Eurorack Systems (black)
 In den Warenkorb
 1 in stock $149.10
Cat: 589506 Rel: 14 Dec 15
 
Power solution for eurorack systems - 40W
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 40 provides 40W of power, suited for up to two typical eurorack rows:

+12V @ 1.5A
-12V @ 1.3A
+5V @ 1.5A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
4ms Shuffling Clock Multiplier Module (Rev 2)
 In den Warenkorb
 3 in stock $170.56
Cat: 589498 Rel: 14 Dec 15
 
Synthesizer module for producing eight multiplied clock tempos from a single input clock - 4HP wide
Notes: The Shuffling Clock Multiplier (SCM) produces eight multiplied clock tempos from a single input clock, ranging from x1 to x8 (x32 by using the Breakout). Some of the outputs can be shuffled/swung. The amount of shuffle is controlled by a CV Slip jack. A Rotate CV jack re-assigns the multiplication number of each jack. More features of the SCM can be controlled by the SCM Breakout.
Read more
4ms Spectral Multiband Resonator Module
 In den Warenkorb
 3 in stock $448.41
Cat: 589505 Rel: 14 Dec 15
 
Innovative resonant filter synthesizer module - 26HP
Notes: The Spectral Multiband Resonator from 4ms Company is an innovative resonant filter which can process audio like a classic filter bank, ring like a marimba when plucked/struck, vocode, re-mix tracks, harmonize, output spectral data, quantize audio to scales, and much more...
A gorgeous ring of colored lights displays the frequency of each filter, as well as the levels and current scale selection(s).

At a glance, the SMR works like a normal six-band graphic EQ: six frequency band-pass filters are mixed together using sliders. Resonance/Q is variable, which changes the "ringy-ness" or width of the bands.

But here's where comparison stops. The frequency of each channel is treated like a note in a scale, and the six bands form a chord. Spin the Rotate knob and the "notes" circle around the scale, rotating back to the bottom once they've reached the top. Adjust Spread and the distance (interval) between each note changes. Triggers for up/down motion, CV inputs for sequencing and scale selection allow for flexible control with external modules. Morph, which automatically cross-fades between frequencies, together with variable Slew allows rhythmic clocks drive the SMR as a variable-speed evolving resonant filter.

At maximum Resonance/Q, the SMR can be struck like a gong or marimba by inputting clocks or triggers. The frequency of each channel is quantized to a scale: beautiful chords, ethereal tones and eerie ambiance flows easily. With lower resonance, the SMR can pull out particular frequency bands, and sweep these across the spectrum.

Two 1V/octave Frequency jacks allow for tracking even and/or odd bands and creating floating melodies over evolving chord bases, or complex percussive membrane sounds.

Save your settings into one of six storage banks, and recall on the fly. On startup, the SMR instantly jumps to the last saved settings. The color scheme of the lights can be adjusted, so if you prefer all white lights on your modular, you can have that (or all red, or rainbows, pastels, etc..)!

Advanced features:
- Program your own scale. The frequency of each of the 20 notes can be assigned by setting the octave, the semi-tone, and coarse and fine micro-tone. Up to 11 scales can be saved permanently in the user bank
- Adjust color scheme of the LEDs. Pick a pre-programmed color scheme or create your own using the sliders to set Red/Green/Blue values. Custom color schemes can be saved permanently
- Save your settings in one of six parameter banks. Note position, scale and bank selection, Q value, Lock settings and color scheme can be saved and recalled on the fly. On startup, the SMR loads settings from the last saved bank.
- Optional alternative filter type for a more exponential decay when plucked and different timbral qualities. Freq jacks no longer track 1V/oct in this mode.
- Slider LEDs can be assigned to display level for each channel (combination of slider position and CV on the jack), or clipping for each channel.
Read more
FORTHCOMING
4ms Stereo Triggered Sampler Recorder & Playback Module
e-mail me when released
coming soon $454.84
Cat: 655465 Rel: 01 Aug 17
 
High fidelity, two-channel stereo sample recorder & playback module
Notes: The Stereo Triggered Sampler can record high quality stereo files, while simultaneously playing two different stereo files. A maximum of 600 samples can be loaded from the removable/swappable microSD card, in a variety of formats up to 96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are CV controllable.

600 Samples:
A maximum of 600 samples can be loaded at once, arranged into banks of 10 samples each. Samples and banks can be re-arranged on the fly using the simple on-board Edit features. Newly recorded samples can be instantly played back and re-pitched, reversed, chopped up, etc... the result of which can even be bounced down and re-recorded to as a new sample! Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo.

Two Stereo Playback Channels:
Each playback channel has a knob and CV jack for Sample File selection, as well as a Start Position knob and CV jack for controlling where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file. These are powerful tools for re-arranging a sample, joining multiple samples, and creating dynamically re-sized loops within a larger sample. Combined with the Play Trigger jack and the 1V/oct jack, the STS can be two complete multi-timbral pitch-tracked stereo voices!
There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.

Looping and Sync:
Looping is easy: just hold the PLAY button down for two seconds to toggle loop or one-shot. The loop timing clock will output from the End Out jack. Or, send a clock into the Play Trig jack to sync the loop to external timing.

Stereo Recording:
Whether you patched 47 modules to create the ultimate percussive blast, or you want to capture your four hour ambient performance, recording high-quality .wav files on the STS is simple. Just hit the REC button or fire a trigger and a new stereo .wav file will be created on the SD card. Do as many takes as you need: the STS never deletes your files. Re-ordering or re-arranging samples into banks is easy, even without a computer.
You can even fill a bank with 10 different variations and immediately use them for playback.
By default the STS records at 44.1kHz/16-bit, with an option for 24-bit (a future update may increase the sample rate to 96kHz)

Easy sample loading:
Using a computer is completely optional with the STS, since samples can be recorded directly to the module and placed into the bank of your choosing. But for users with large existing sample banks, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. You never have to rename your files again!
Read more
FORTHCOMING
4ms SWN Spherical Wavetable Navigator Oscillator Module
e-mail me when released
coming soon $TBA
4ms VCA Matrix Module
 In den Warenkorb
 2 in stock $362.59
4ms VCA Matrix Module (synth module)
Cat: 589496 Rel: 14 Dec 15
 
Playable 4x4 matrix synth module of 16 VCAs - 26HP wide
Notes: The VCA Matrix from 4ms is a playable 4x4 matrix of 16 VCAs.

Four CV or audio inputs can be routed in any amount/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons.
Read more
4ms VCA Matrix Module (B-STOCK)
 In den Warenkorb
 1 in stock $297.36
Cat: 636358 Rel: 14 Dec 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The VCA Matrix from 4ms is a playable 4x4 matrix of 16 VCAs.

Four CV or audio inputs can be routed in any amount/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons.
Read more
FORTHCOMING
4ms Wav Recorder Module
e-mail me when released
coming soon $454.84
Cat: 648950 Rel: 01 Jun 17
Abstract Data ADE32 Octocontroller Eight Output Modular Control Panel Module
 In den Warenkorb
 More than 10 in stock $319.67
Cat: 601493 Rel: 25 Apr 16
 
Eight output, modular control panel - 14HP wide
Notes: Highly configurable Control, Modulation, Triggering and Pattern module. 8 simultaneous Outputs and 12, individually assignable, Output types.

Output and Modulation types include Pulses, Gates, LFOs, Digital Noise, Loopable S&H modes and a collection of Arpeggios and Rhythmic Loops.

Tempo-sync for all Outputs is provided by the on-board Clock or
an External Clock Input with Tempo ranges from 20 to 270 BPM.

Outputs can be set to any Clock Division or Multiple from 1/16th
of a Beat to 16 Bars and can be Offset up to 360 Degrees.

Intuitive interface allows user-definable control over knob and parameter behavior to match the preferences of individual users.

For audio, please visit: http://www.abstractdata.biz/products/eurorack/3x/ade32/?tab=audio
Read more
ACL Envelope X3 Triple Envelope Generator Module
 In den Warenkorb
 1 in stock $429.09
Cat: 655470 Rel: 10 Jul 17
 
Envelope generator module - 21 HP
Notes: The ADSR envelope from the Japanese 100m system is well-known for its percussivity and the enormous punch. ACL gives us three of them in one single Eurorack module, the Envelope X3.

Sometimes an envelope generator doesn't have to be function-ladden, but just reliable, solid and good. This is what ACL achieves with the Envelope X3 module. The technical quality originates in precision components, as used in measuring instruments for instance, in order to keep the parameters exact, always the same and to keep you happy.

Three identical, classic Attack-Decay-Sustain-Release envelopes are integrated; function-wise rather simple with a gate input and one positive and one inverted envelope output each. The gate inputs are normalized (1 -> 2 -and 1 -> 3; with input 1 as master) which minimizes the amount of patch cords. Normalizations can be disrupted by patching a cable.

Each envelope generator has a time range switch with two positions to select between short and long envelope times.

The LEDs for visualisation were omitted to keep the power consumption low.
Read more
AJH Synth Gain Switch Multi Module (black)
 In den Warenkorb
 1 in stock $75.09
Cat: 637039 Rel: 27 Mar 17
 
Dedicated switch module for Minimod, VCF/VCA gain jumper settings, plus 6-way multiple - dark edition
Notes: AJH Synth have had quite a few customers asking if we can make the gain jumpers on the MiniMod VCF and VCA modules accessible from the front panel, so this 2HP module aims to address this.

The Gain Switch Multi has two switches which connect to the gain jumpers on the VCA and VCF. Switch "up" is the same as having the gain jumper in place, switch "down" is the same as removing the jumper, and gives higher gain.

Using these switches gives a similar effect to the old "headphone out to external input" trick on the original Model D but with a much wider overdrive range, particularly from the VCA.

As an added bonus, AJH Synth have also included a six way passive multi.
Read more
AJH Synth Gain Switch Multi Module (silver)
 In den Warenkorb
 1 in stock $75.09
Cat: 637038 Rel: 27 Mar 17
 
Dedicated switch module for Minimod, VCF/VCA gain jumper settings, plus 6-way multiple - silver
Notes: AJH Synth have had quite a few customers asking if we can make the gain jumpers on the MiniMod VCF and VCA modules accessible from the front panel, so this 2HP module aims to address this.

The Gain Switch Multi has two switches which connect to the gain jumpers on the VCA and VCF. Switch "up" is the same as having the gain jumper in place, switch "down" is the same as removing the jumper, and gives higher gain.

Using these switches gives a similar effect to the old "headphone out to external input" trick on the original Model D but with a much wider overdrive range, particularly from the VCA.

As an added bonus, AJH Synth have also included a six way passive multi.
Read more
AJH Synth Mini Mod CV Mix Offset VCA Module (black)
 In den Warenkorb
 4 in stock $166.28
Cat: 637050 Rel: 27 Mar 17
 
Bipolar mixer, DC voltage source & linear DC-coupled VCA - dark edition
Notes: This useful module is a Bipolar Mixer, DC voltage source and Linear DC coupled VCA.

- With no input to channel 1 the Input 1 pot becomes a voltage source with a range of +/- 6V.
- The control pot and input for channel 4 can be switched to become an offset control and/or a second CV input for the VCA.
- Input 3 has 2x gain, so it can amplify lower level CV's too.
- All inputs are bipolar, which means that either non-inverted or inverted version of the input signal can be added to the mix depending upon the Input control being turned clockwise (non-inverting) or anti-clockwise (inverted). The 12'o'clock position is zero.
Read more
AJH Synth Mini Mod CV Mix Offset VCA Module (silver)
 In den Warenkorb
 2 in stock $158.76
Cat: 637049 Rel: 27 Mar 17
 
Bipolar mixer, DC voltage source & linear DC-coupled VCA - silver
Notes: The MiniMod CVMix-Offset-VCA is a compact 10hp wide Eurorack format module. It has been developed to offer a range of useful utilities for the MiniMod system and of course other Eurorack synthesisers.

It comprises a four channel polarising mixer, amplifier, inverter, a voltage source and a DC coupled VCA with switchable CV offset.

Uses include mixing together CV modulation sources, mixing an offset voltage with a CV source, converting a bipolar +/- 5V modulation into a unipolar 0 to +5V.

This useful module is a Bipolar Mixer, DC voltage source and Linear DC coupled VCA.

- With no input to channel 1 the Input 1 pot becomes a voltage source with a range of +/- 6V.
- The control pot and input for channel 4 can be switched to become an offset control and/or a second CV input for the VCA.
- Input 3 has 2x gain, so it can amplify lower level CV's too.
- All inputs are bipolar, which means that either non-inverted or inverted version of the input signal can be added to the mix depending upon the Input control being turned clockwise (non-inverting) or anti-clockwise (inverted). The 12'o'clock position is zero.
Read more
AJH Synth Mini Mod DH ADSR Envelope Module (black)
 In den Warenkorb
 1 in stock $225.28
Cat: 637047 Rel: 27 Mar 17
 
Model D-based complex envelope generator - dark edition
Notes: AJH Synth have had quite a few requests for a variant of MiniMod contour generator with Release added to the envelope so that it is full ADSR but still with the characteristics of the Model D - so this is what they have done!

The DH-ADSR is exactly the same circuit as the original Model D envelope and therefore features the same contour shape and retrigger behaviour, but with the addition of a release control. However, they have also added a pulse delay and pulse stretch circuit, along with a re-trigger facility (both of these can be switched out of circuit so that the envelope is a simple ADSR unit).

The addition of pulse stretching and retrigger makes it into an LFO module and it can perform in a similar way to the EMS Synthi A and VCS3 Trapezoid generator, with a variable delay between each trigger and a variable "on" time - however it can also have full ADSR envelope on each retrigger too!

Notable Features:

- PREDELAY - This control determines how long (up to 10 seconds) the start of the envelope is held off, after a gate is received. This ability to delay the onset of the envelope is especially useful when used in conjunction with a standard ADSR: With both envelopes receiving the gate simultaneously complex envelopes can be produced as the DH-ADSR only starts running through its stages after the standard ADSR has completed. Once their outputs are mixed together in a mixer a single evolving envelope with multiple stages is produced!

- Use of the bipolar mixer found in the MINIMOD CV MIX-OFFSET-VCA module can enhance this technique even further, with more precise control over the polarity/offset of the envelope mix possible. Using the VCA of this module could allow for external modulation over either/both of the signals. It goes on...

- HOLD - When in Del-Hold mode (switch down) the HOLD control determines the gate length applied to the envelope, and thus controlling its length/overall shape. When the switch is up, normal ADSR action is produced.

- RETRIG - In this mode the DH-ADSR becomes an LFO, which can mimic the "Trapezoid" function of the vintage EMS designs. HOLD controls the length of the trapezoid shape, and PREDELAY allows for adjustable gaps between each repeat of the shape produced.
Read more
AJH Synth Mini Mod DH ADSR Envelope Module (silver)
 In den Warenkorb
 1 in stock $213.47
Cat: 637046 Rel: 27 Mar 17
 
Model D-based complex envelope generator - silver
Notes: AJH Synth have had quite a few requests for a variant of MiniMod contour generator with Release added to the envelope so that it is full ADSR but still with the characteristics of the Model D - so this is what they have done!

The DH-ADSR is exactly the same circuit as the original Model D envelope and therefore features the same contour shape and retrigger behaviour, but with the addition of a release control. However, they have also added a pulse delay and pulse stretch circuit, along with a re-trigger facility (both of these can be switched out of circuit so that the envelope is a simple ADSR unit).

The addition of pulse stretching and retrigger makes it into an LFO module and it can perform in a similar way to the EMS Synthi A and VCS3 Trapezoid generator, with a variable delay between each trigger and a variable "on" time - however it can also have full ADSR envelope on each retrigger too!

Notable Features:

- PREDELAY - This control determines how long (up to 10 seconds) the start of the envelope is held off, after a gate is received. This ability to delay the onset of the envelope is especially useful when used in conjunction with a standard ADSR: With both envelopes receiving the gate simultaneously complex envelopes can be produced as the DH-ADSR only starts running through its stages after the standard ADSR has completed. Once their outputs are mixed together in a mixer a single evolving envelope with multiple stages is produced!

- Use of the bipolar mixer found in the MINIMOD CV MIX-OFFSET-VCA module can enhance this technique even further, with more precise control over the polarity/offset of the envelope mix possible. Using the VCA of this module could allow for external modulation over either/both of the signals. It goes on...

- HOLD - When in Del-Hold mode (switch down) the HOLD control determines the gate length applied to the envelope, and thus controlling its length/overall shape. When the switch is up, normal ADSR action is produced.

- RETRIG - In this mode the DH-ADSR becomes an LFO, which can mimic the "Trapezoid" function of the vintage EMS designs. HOLD controls the length of the trapezoid shape, and PREDELAY allows for adjustable gaps between each repeat of the shape produced.to an LFO module and it can perform in a similar way to the EMS Synthi A and VCS3 Trapezoid generator, with a variable delay between each trigger and a variable "on" time - however it can also have full ADSR envelope on each retrigger too!
Read more
AJH Synth Mini Mod Discrete Cascaded VCA Module (black)
 In den Warenkorb
 2 in stock $166.28
Cat: 625062 Rel: 26 Sep 16
 
Mini Mod Discrete Cascaded VCA Module
Artikel 1 bis 50 von 412 auf Seite 1 von 9 anzeigen
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | »
Equipment

DJ-Ausrüstung

 
Release Date
 
Featured
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close